Just an old D104 I aquired at a sale, decided to mod it into a working desk mic for my pc. Will require heavy modification For the 3d printed parts, i have not tested the base cover on mine, the mic holder fit perfectly, the wire clamp too, pcb holder needed a little shortening on mine but i changed it in the editor so should be ok. the pcb is held on by 2 screws, i did not add those holes to the printed part, will have to pre drill those two holes or edit yourself (i may fix this later on). the connectors between the head and body will have to be removed, mine were causing background noise when i touched the base of the cb. Will need to aquire extra wire and be able to solder them, also heat shrink is a good idea. On mine the talk button is hooked up to the pcb to mute the mic when clicked.
Thanks for looking
Microphone used: Blackweb Premium USB Recording Microphone, Black, CVL-2003