This organizer is designed to print with a .8 nozzle. .4 and .2 will work fine as well. The box is an easy fit but you still want to have esteps and flow correct. Your printed walls should be 1.6mm thick.
This design was tested with FFG and Board Game Sleeves so it should fit any sleeve as those run large.
This is the small format printer design I've uploaded a large printer design that can be found here.
This design splits the large tray into 4 parts and the card tray into two. The designs are not cross compatible pick one or the other and print the parts from only one design.
I've added to the splits flat surfaces that can be glued and clamped to make a single solid tray. I recommend you sand the surface and score it with a knife before gluing.
Print the following
1x Dice Tray 1x Large Tray - Split 1 1x Large Tray - Split 2 1x Large Tray - Split 3 1x Large Tray - Split 4 1x Small Tray - Split 2x Card Tray - Split