[ Design Concept] - The chess pieces design was inspired by the following references: https://www.thingiverse.com/thing:4181010 - All modeling, including detail and size, was built from scratch. - It is designed to be assemblyable and can be printed in 200x200 sizes. - It is recommended to use glue if the assembly is not tight. - It can be made in two or three colors.
[ Tools and Materials ] - Modeling with Rhino 3D - Slicing with Simplify 3D - Printing with Plus 200 - Using PLA in 3DMaterials, Black, White Marble, Gray
[ Setting ] - All parts are based on a 0.3 mm offset for assembly - No Raft, No Support, Use Skirt or Brim - Infill 10~20% - Layer Height : Pieces 0.1 mm, Others 0.2 mm
[ Object ] 1. ChessBoard_Top(Black).stl - Color : Black - Infill : 10% - Layer Height : 0.2 mm - Time : 10 H 2. ChessBoard_Bottom(White).stl - Color : White - Infill : 10% - Layer Height : 0.2 mm - Time : 20 H 3. ChessBoard_Base.stl - Color : Gray - Infill : 10% - Layer Height : 0.2 mm - Time : 10 H 4. ChessTile_0.3mm offset(Black, White, needed 32EA).stl - Color : Black 32 EA, White 32 EA - Infill : 20% - Layer Height : 0.1 mm - Time : 6 H(Total) 5. Chessmen(Black, White).stl - Color : Black 1 EA, White 1 EA - Infill : 20% - Layer Height : 0.1 mm - Time : 12H(Total) - Horizontal size compensation 0.2 mm ____________________________________________________________
[ Update History ] - 02 - Jan - 2021 : First updated - 04 - Jan - 2021 : Chessmen print setting added (Horizontal size compensation 0.2 mm)