Tee Bar Sash Clamp Pad (with magnet) I designed a standard sash clamp pad https://www.thingiverse.com/thing:4698548 as I was fed up with finding suitable timber to space my projects away from the sash clamps. I have now modified the design so they fit the Irwin Tee bar Sash clamps. These are approx. 19mm wide. The pads space the clamps 12 mm from the timber and the face of the clamp is 400mm in dia. If you need a soft surface these could have a cork, rubber, felt pad glued on. You require a 10mm dia magnet anywhere from 5-10mm long. I have included four stl files 10.0, 10.2, 10.4 and 10.6 and the hole has a very slight taper (draft) so you may need to experiment with the correct size for your printer. Or print the largest one and glue the magnet in.