Live Music Archive
Librivox Free Audio
Metropolitan Museum
Cleveland Museum of Art
Internet Arcade
Console Living Room
Books to Borrow
Open Library
TV News
Understanding 9/117 Foot Pixel Arch - Pixel (4807918)
Item Preview
There Is No Preview Available For This Item
This item does not appear to have any files that can be experienced on Archive.org.
Show all files
This is a Heavy Duty mounting bracket for LED Holiday Arch. The Arch is angled to support at 10 Foot 2" HDPE Tube 7 to 8 feet across. Can be used with LED Bullet Pixel or Strips.
Materials needed:
2 - 10' HDPE Tubes with 2" OD, 1.75" ID
4 - 25MM M6 Bolts
4 - M6 Nuts
1 - 7or 8' 1/2" EMT Tube
2 - M5 Nuts
2 80MM M5 Bolts
To Assemble:
1) Insert 4 nuts into the internal nut holders
2) Insert tube into the mounting bracket
3) Use drill with 5MM bit to drill hole through tube thru the 4 holes.
4) Tighten the bolts together, not one at a time (or you will risk cracking the inner part of the apparatus.
5) Drill 2 holes in the EMT tube 3/4 inch from each end.
6) Attach the cross support on both ends
7) Repeat steps 1-4 for the bracket on the other end.
Insert the HDPE tube into 1 mount. Use a drill through the 4 mounting holes
Materials needed:
2 - 10' HDPE Tubes with 2" OD, 1.75" ID
4 - 25MM M6 Bolts
4 - M6 Nuts
1 - 7or 8' 1/2" EMT Tube
2 - M5 Nuts
2 80MM M5 Bolts
To Assemble:
1) Insert 4 nuts into the internal nut holders
2) Insert tube into the mounting bracket
3) Use drill with 5MM bit to drill hole through tube thru the 4 holes.
4) Tighten the bolts together, not one at a time (or you will risk cracking the inner part of the apparatus.
5) Drill 2 holes in the EMT tube 3/4 inch from each end.
6) Attach the cross support on both ends
7) Repeat steps 1-4 for the bracket on the other end.
Insert the HDPE tube into 1 mount. Use a drill through the 4 mounting holes
Reviews
There are no reviews yet. Be the first one to
write a review.
