I wanted to try the orbiter on the Jubilee printer, unfortunately nothing was available so I worked this up. Rather than come up with a custom tool plate I opted to work around the E3D tool plate. It is also modeled around the standard Bondtech toolposts so a custom toolpost is not required.

On a side note the right and left tool wings have places for 4 screws, I only use 3 for each wing, I was too lazy to remove the center screw position but left it empty on my extruder.

All items in the 3MF are oriented as they should be for printing. The only place that truly requires supports is the JST plug opening in the main mount.

I took the Prusa approach for this design and am using captive and pocket nuts instead of heatserts. I can add a heatsert based model if there's interest.

Parts List:
- (10) M3 DIN 562 SQ Nuts, note the fit can be very tight.
- (4) M3 Nuts
- (2) M3 x 20 cap screw for the 5015 blowers.
- (4) fan mount screws, either M3 x 16.

I combined the top two hotend fan shroud bolts with the main body to help hold it in place.

No supports required to print.

https://imgur.com/CjmK3RQ

plus-circle Add Review

comment

Reviews