Live Music Archive
Librivox Free Audio
Metropolitan Museum
Cleveland Museum of Art
Internet Arcade
Console Living Room
Books to Borrow
Open Library
TV News
Understanding 9/11Children's finger pinch protection 4 door & drawer (5424358)
Item Preview
There Is No Preview Available For This Item
This item does not appear to have any files that can be experienced on Archive.org.
Show all files
Heyho
My smallest kid starts to look around in our household, so I had to build sth. to protect these precious, small fingers :D Of course this doesn´t eleminate the possibility for the fingers to get pinched but it reduces the possible surface to a minimum.
I have 3 designs to be screwed into place with 3 mm wood screws.
Springy: This version works with a printed spring. So you can 3D print all essential parts. But use good material for the spring that will not weaken over time. I used PETG.
Rubbery: This version works with normal rubber bands. The advantage is that you can easily adjust its strength.
Gravity: This version comes with a hook to which you can attach various things. So use a metal spring or let gravity do the job!
Stability tipp: Print with 3 perimeters and 100% infill.
Action tipp: Use some wax (Parrafine) or lube to make all parts moove more easy. Especially the printed spring could use some to reduce the friction ,-)
Have fun and keep printin!
PS: It can also be used as a little toy for the kids if they already opened the drawer ,-)
My smallest kid starts to look around in our household, so I had to build sth. to protect these precious, small fingers :D Of course this doesn´t eleminate the possibility for the fingers to get pinched but it reduces the possible surface to a minimum.
I have 3 designs to be screwed into place with 3 mm wood screws.
Springy: This version works with a printed spring. So you can 3D print all essential parts. But use good material for the spring that will not weaken over time. I used PETG.
Rubbery: This version works with normal rubber bands. The advantage is that you can easily adjust its strength.
Gravity: This version comes with a hook to which you can attach various things. So use a metal spring or let gravity do the job!
Stability tipp: Print with 3 perimeters and 100% infill.
Action tipp: Use some wax (Parrafine) or lube to make all parts moove more easy. Especially the printed spring could use some to reduce the friction ,-)
Have fun and keep printin!
PS: It can also be used as a little toy for the kids if they already opened the drawer ,-)
Reviews
There are no reviews yet. Be the first one to
write a review.
