Live Music Archive
Librivox Free Audio
Metropolitan Museum
Cleveland Museum of Art
Internet Arcade
Console Living Room
Books to Borrow
Open Library
TV News
Understanding 9/11Cetus MK3 Open Software E3D v6 titan rebuild (5427044)
Item Preview
There Is No Preview Available For This Item
This item does not appear to have any files that can be experienced on Archive.org.
Show all files
I was no fan of the Cetus3D Cetus MK3 being a closed software distribution but i really liked the sturdy Mechanics.
I wanted to combine the Mechanics with an open software and the E3D V6 environment, so this is a in place printable adapter plate to house a E3D V6 with a titan Extruder on the cetus while keeping the Tiertime mini board on the assembly.
I designed this part to use original mounting hardware and with the possibility to maintain all original Cetus Hardware beside the extruder assembly (grounding wire, wire harness).
additional Hardware needed:
- E3D V6 Hotend
- E3D Titan Extruder
- Pancake Stepper
- may need smaller bolts to fix to gantry.
- Should work with original extruder and platine bolts.
ATTENTION!
This is and will stay a work i Progress. I switched away from the Printer and do not continue to develop this Part. As of its status now, it is properly working and at least for me produces good quality prints with even being able to print ASA succesfully.
DISCLAIMER:
I do not know if this rebuild works with the original CPU and Board! I switched for a TinyfabXYZ (no affiliation and no advertisment).
If you want to make the switch for this board, this will be the config you need:
https://github.com/Reac0/TinyfabXYZ-Config-for-Cetus/blob/9dd1910f8f2ae30c3f61f3118e45d1f2165ee3c7/config%20Save
I wanted to combine the Mechanics with an open software and the E3D V6 environment, so this is a in place printable adapter plate to house a E3D V6 with a titan Extruder on the cetus while keeping the Tiertime mini board on the assembly.
I designed this part to use original mounting hardware and with the possibility to maintain all original Cetus Hardware beside the extruder assembly (grounding wire, wire harness).
additional Hardware needed:
- E3D V6 Hotend
- E3D Titan Extruder
- Pancake Stepper
- may need smaller bolts to fix to gantry.
- Should work with original extruder and platine bolts.
ATTENTION!
This is and will stay a work i Progress. I switched away from the Printer and do not continue to develop this Part. As of its status now, it is properly working and at least for me produces good quality prints with even being able to print ASA succesfully.
DISCLAIMER:
I do not know if this rebuild works with the original CPU and Board! I switched for a TinyfabXYZ (no affiliation and no advertisment).
If you want to make the switch for this board, this will be the config you need:
https://github.com/Reac0/TinyfabXYZ-Config-for-Cetus/blob/9dd1910f8f2ae30c3f61f3118e45d1f2165ee3c7/config%20Save
Reviews
There are no reviews yet. Be the first one to
write a review.
