5
5.0
Apr 20, 2021
04/21
by
aroe (aroerina2)
data
eye 5
favorite 0
comment 0
Case for cheap Chinese USBTinyISP. You need two M2 screws.
Topics: thingiverse, stl, AVR_Programmer, Electronics
9
9.0
Jan 20, 2021
01/21
by
jaco vanvuuren (jacojvv)
data
eye 9
favorite 0
comment 0
This is my take on a Programmer box for the Jyetech Avr Programmer https://jyetech.com/Products/073/e073.php V2 was made with Slightly bigger holes for the cables to fit. Also added holes in lid that can be filled with glue or resin so it will show the LED's better when they light up
Topics: JYETech, Electronics, AVR_Programmer, thingiverse, programmer, stl
4
4.0
Mar 21, 2021
03/21
by
mari an (telefonche)
data
eye 4
favorite 0
comment 0
Print and place Pololu USB AVR programmer inside.
Topics: stl, avr, pololu, AVR_Programmer, Robotics, thingiverse
5
5.0
Mar 25, 2021
03/21
by
John (KiwiGrinder)
data
eye 5
favorite 0
comment 0
All Amtel AVR Microcontrollers have what are known as fuse bits. These special bits determine how the microcontroller is configured. Some fuse bits may determine whether an external crystal is used or whether the reset pin for example can be used as a IO pin. In the case of the reset pin, configuring it as a IO pin will prevent the processor from being programmed via an ISP programmer. You may wonder why you might do this. An 8-Pin microcontroller has 5 IO pin and a Reset pin. If you don't need...
Topics: stl, arduino, AVR_Programmer, thingiverse, Electronics, avr
6
6.0
Mar 4, 2021
03/21
by
Joe Ostrander (joeostrander)
data
eye 6
favorite 0
comment 0
I broke my case for my AVRISP mkII programmer when I took it apart. So I made a new one! Inspired by WayneWeng's case: https://www.thingiverse.com/thing:647490 https://youtu.be/D4whaWCYYEY Mine is modded to supply 5v to the circuit, so I made 2 lids: 1 that a button can go through and 1 without.
Topics: stl, avrisp, arduino, AVR_Programmer, Electronics, thingiverse
4
4.0
Jan 8, 2021
01/21
by
C Biker (CBiker)
data
eye 4
favorite 0
comment 0
Befestigung fuer mySmartUSB Programmer auf Steckboard.
Topics: stl, programmer, mysmartusb, AVR_Programmer, myavr, thingiverse, Electronics
9
9.0
Mar 5, 2021
03/21
by
Carl (Stellar Innovation) (stellarinnovation)
data
eye 9
favorite 0
comment 0
Does the world need another AVR programming shield? Probably not... But I still had fun making this one and got some practice milling double sided circuit boards using [MPCNC](https://www.thingiverse.com/thing:724999). It uses an Arduino Uno + the example sketch called ArduinoISP. Once the sketch is flashed, the Uno + shield can be used stand-alone as an AVR programmer (no need to use Arduino IDE). There's an 8-pin DIL socket for ATtiny85 (for example) and a 6-pin ISP header for other chips.
Topics: stl, arduino, AVR_Programmer, pcb, Electronics, thingiverse, milling
2
2.0
Apr 20, 2022
04/22
by
Daumemo (daumemo)
data
eye 2
favorite 0
comment 0
A small two part enclosure which fits inside an Arduino Nano board. Has two holes in front and back (for USB and a 6 pin header). Used for a DIY USB UPDI programmer for programming Attiny and other MCUs which have UPDI programming interface. Instead of an UPDI programmer, the enclosure could be also used for your other personal projects. You can read more about it, and how to actually build an electronics device here:...
Topics: thingiverse, USB, Electronics, AVR_Programmer, UPDI, Programmer, stl
10
10.0
Jan 21, 2021
01/21
by
Esteban Adra (Esteban16899)
data
eye 10
favorite 0
comment 0
A friend asked me to design a case for his programmer. It worked like a charm, it slides to the pcb end, then it stays locked by the solders below the pcb. You will need to apply a little presure to fit in.
Topics: case, Electronics, AVR_Programmer, arduino, thingiverse, programmer, stl
12
12
Mar 12, 2021
03/21
by
John (KiwiGrinder)
data
eye 12
favorite 0
comment 0
Amtel AVR Microcontrollers come in a number of variants. The one most Arduino users know is the 28 pin ATMega328 variant. However AVR chips come in 8-Pin, 14-Pin, 20-Pin and 40-Pin packages as well. The less pins on a chip mean less IO ports. The Digispark board which is an Arduino variant uses a ATTiny85 Microcontroller and has only 5 IO pins. Arduino boards (eg Uno, Mega, Digispark) load software from the Arduino IDE via the USB port. This is only possible because the AVR Microcontroller on...
Topics: thingiverse, electronics, avr, AVR_Programmer, stl, arduino, Electronics
2
2.0
Dec 13, 2021
12/21
by
Martin Pihrt (pihrt)
data
eye 2
favorite 0
comment 0
Programátor pro procesory AVR Atmel (Microchip). Více zde: https://pihrt.com/elektronika/390-programator-atmel-isp-usbasp
Topics: ICSP, usb, avr, stl, thingiverse, Electronics, AVR_Programmer
4
4.0
Mar 5, 2021
03/21
by
Martin Pihrt (pihrt)
data
eye 4
favorite 0
comment 0
Programátor: https://pihrt.com/elektronika/390-programator-atmel-isp-usbasp
Topics: DIY, stl, arduino, AVR_Programmer, ICSP, atmel, thingiverse
6
6.0
Apr 12, 2021
04/21
by
John Socha-Leialoha (JohnSL)
data
eye 6
favorite 0
comment 0
This is a simple box to contain a Sparkfun Pocket AVR Programmer board. The top snaps in place, so it's easy to remove.
Topics: thingiverse, avr, programmer, sparkfun, box, stl, Electronics, AVR_Programmer
9
9.0
Jan 16, 2021
01/21
by
Eladio Martinez (mafe72)
data
eye 9
favorite 0
comment 0
This is a case for Bus Pirate v3.6 , the case self-lock together snugly. Sketchup source included for further customization.
Topics: case, Electronics, AVR_Programmer, thingiverse, buspirate, jtag, avr, stl
6
6.0
Mar 4, 2021
03/21
by
Michal Batorowicz (mbatorowicz)
data
eye 6
favorite 0
comment 0
ISP USBASP AVR ATMEL ARDUINO+ - CASE
Topics: stl, 3D Printer Accessories, programmer, case, AVR_Programmer, thingiverse
5
5.0
Apr 20, 2021
04/21
by
Ross Thomas (RT_Engineering)
data
eye 5
favorite 0
comment 0
AVR 6 pin ICSP socket cover (You can use it for non-AVR socket purposes, I won't judge). Slides in and out easy, and has a small lip so you can pull it out using your nails. Doesn't fall out when shaken upside-down but given that it's an interference fit it can be a bit picky about different socket makes.
Topics: thingiverse, cover, stl, Electronics, AVR_Programmer, avr, ICSP, socket
5
5.0
Apr 20, 2021
04/21
by
Bruce Ratoff (bratoff)
data
eye 5
favorite 0
comment 0
Little Wire is a project by Ihsan Kehribar. It's kind of an ATtiny85-based USB Swiss army knife gadget that it can be used to implement a bunch of different hardware interfaces (parallel, I2C, SPI, ADC, 1Wire, WS2812, PWM, UART, AVR programmer) over a USB port. You can read more at the project website: http://littlewire.github.io/ I claim no credit for the electronics - I used the Eagle files on Ihsan's website to get a board made and then populated it - but I did think his project deserved a...
Topics: thingiverse, stl, Electronics, arduino, AVR_Programmer, attiny85, ATtiny, usbtinyisp
7
7.0
Apr 18, 2021
04/21
by
Micha El (Aeggsbaerde)
data
eye 7
favorite 0
comment 0
This is a smal case for a Pololu USB AVR Programmer V2. Original Product: https://www.pololu.com/product/3170 *Update:* V3 with rising to click the top part to the bottom part.
Topics: case, thingiverse, stl, AVR_Programmer, Electronics, pololu, Pololu_Mount
5
5.0
Apr 11, 2021
04/21
by
John Roark (johnroark)
data
eye 5
favorite 0
comment 0
SainSmart USB AVR ISP case S51 www.betemcu.cn
Topics: thingiverse, usbasp_case, USB, stl, Electronics, AVR_Programmer, USBASP
10
10.0
Apr 30, 2021
04/21
by
Håvard Modalen (modalen)
data
eye 10
favorite 0
comment 0
case for AVRdragon
Topics: stl, AVR8, case, AVR_Dragon, thingiverse, AVR_Programmer, 3D Printing
5
5.0
Apr 12, 2021
04/21
by
Craig Berscheidt (builttospec)
data
eye 5
favorite 0
comment 0
This is a nice little case for the AVR Pocket Programmer. Grab one here: http://www.storenvy.com/products/12542895-avr-pocket-programmer-case Full assembly instructions here: http://www.built-to-spec.com/blog/avr-pocket-programmer-case/ Design by RoboLemur.
Topics: thingiverse, Computer, avr_pocket_programmer, Case, stl, AVR, AVR_Programmer
3
3.0
Jun 11, 2021
06/21
by
Dejan Gjorgjevikj (DejanGjorgjevikj)
data
eye 3
favorite 0
comment 0
This is a slim single part, sliding snap fit case for the USBASP USBISP AVR Programmer. Designed in Tinkercad in couple of hours. Print it with the USB plug side on the bottom, no supports.
Topics: Electronics, AVR Programmer case, thingiverse, USBASP case, USBISP case, stl
5
5.0
Mar 9, 2021
03/21
by
Bruce Ratoff (bratoff)
data
eye 5
favorite 0
comment 0
Remixed sej7278's tray to work with my multi-type ICSP programming breakout board. Loved the snap-in concept and just had to adjust the board dimensions to fit. The board has a 20-pin ZIF socket and can program any thru-hole AVR chip of 20 pins or less. Separate 6-pin ICSP headers are used to select the chip type and additional jumpers are provided for similar chips with minor differences. There are also socket pins provided for 3-pin ceramic resonators to accommodate chips that were already...
Topics: Electronics, bumper_case, stl, thingiverse, ATtiny, avr, ATTINY2313, attiny85, AVR_Programmer
9
9.0
Mar 10, 2021
03/21
by
moritz (ebastler)
data
eye 9
favorite 0
comment 0
I made a small case for some cheap chinese USBasp (I think there are different boards in circulation, but this one should be quite common). It is printed in two parts, you should then fix the upper with some drop of glue (it stays in place without as well, though). Nothing fancy about it, just a small ans stylish case.
Topics: atmega, USBASP, stl, thingiverse, ATtiny, avr, usbasp_case, AVR_Programmer, DIY
4
4.0
Mar 8, 2021
03/21
by
Bruce Ratoff (bratoff)
data
eye 4
favorite 0
comment 0
Modified the top case because USPTinyISP v3.0 has the power jumper and 6-pin connector in a different location than the original version. The bottom case is unchanged, although in retrospect I would shrink or notch out the corner support under the power jumper to make room for the solder joint.
Topics: Electronics, atmega, stl, thingiverse, ATtiny, avr, microchip, atmel, AVR_Programmer, ICSP
6
6.0
Apr 8, 2021
04/21
by
Kasper Jacobsen (Moonshine42)
data
eye 6
favorite 0
comment 0
This 3D printable case is for the "AVR Dragon" micro-controller programmer This project has been split into separate files for an easier and better print experience.. The "Top_Plate" design has been changed. NOTE: The dragon, Text and the Logo is supposed to be glued onto the "Top_Plate" in this design. . . ___________________________________ The original decign is made by. MiseryBot. the original project can be found here: https://www.thingiverse.com/thing:2010407...
Topics: Electronics, Avro, AVR_Programmer, avr_case, stl, thingiverse, avr, AVR_Dragon
10
10.0
Apr 30, 2021
04/21
by
Cuda Tox (cudatox)
data
eye 10
favorite 0
comment 0
This is an enclosure for the AVR pocket programmer available on Sparkfun. No screws are required, everything snaps together. The lid is press fit on to the enclosure to make it easy to access the internal switch if needed. I recommend printing this in a clear or translucent material so the internal LEDs are visible. Full OpenSCAD source is included and many of the parameters are tweakable.
Topics: stl, electronics, electronics_enclosure, enclosure, openscad, Electronics, sparkfun, thingiverse,...
4
4.0
Apr 1, 2021
04/21
by
Ricardo Franke (Devilscave)
data
eye 4
favorite 0
comment 0
Gehäuse für Pololu v2.1 Programmer Ein kleines Gehäuse was einfach auf den Pololu aufgesteckt werden kann, hält sich selber fest und muss nicht verklebt werden. Macht den Pololu nicht viel größe aber sicherer im Umgang um ihn vor Beschädigungen zu schützen. A small housing that can simply be plugged onto the Pololu, holds itself in place and does not have to be glued. Doesn't make the Pololu much bigger but safer to use to protect it from damage. Print Option: Brim: 3-5mm Supports: NO...
Topics: pololu, thingiverse, Electronics, case, v2.1, programmer, AVR_Programmer, popolu, stl, housing
3
3.0
Jul 25, 2021
07/21
by
akos boda (akosboda)
data
eye 3
favorite 0
comment 0
Arduino programmer, isolated control RX TX DTR signals. Useful when the device to be programmed is on a different potential from the mains earth. It could protect your laptop from damages via ground loops or kickback from high power devices as well. For data transfer, it uses the ADUM-1201 chip, and opto isolator for the DTR (reset). Isolated power is provided by B0505S-1W module. The output has selectable 5 or 3.3V voltages. The project uses the CH340G USB module. Micro USB version is...
Topics: thingiverse, arduino, isolated, usb_to_serial, stl, Electronics, programmer, AVR_Programmer
11
11
Jan 16, 2021
01/21
by
Eladio Martinez (mafe72)
data
eye 11
favorite 0
comment 0
A case for the BlackCat/FalshCat USB ISP/JTAG programmer. The case is self-lock, no need for glue or screws, just clip it together, the case is a bit tight to lock together.
Topics: case, AVR_Programmer, BlackCat, thingiverse, FlashCat, jtag, usb, DIY, avr, stl, reprap
12
12
Apr 7, 2021
04/21
by
Chris (ChrisMUC)
data
eye 12
favorite 0
comment 0
__This is a basic case for the AVR Dragon with mounted ZIF-Socket.__ The AVR Dragon is delivered without a case so I designed one myself. The AVR Dragon is a microcontroller programming device from ATMEL. (i.e. Arduino uses these microcontrollers) _For details of this device see here:_ http://www.atmel.com/tools/avrdragon.aspx __So why is this case special?__ - __Wing-Design for easy access__ I mounted a ZIF-Socket to the AVR Dragon so the case is designed with a 'wing' to protect the...
Topics: Electronics, AVR_Programmer, ATMEL, stl, AVR, Case, thingiverse, AVRDragon, PROGRAMMER, AVR_Dragon
2
2.0
Sep 13, 2021
09/21
by
Nicholas Zambetti (zambetti)
data
eye 2
favorite 0
comment 0
Replacement Enclosure for AVRISP MKII from Atmel The official Atmel enclosure that came with the AVRISP MKII does not allow the cable to be easily replaced, also this enclosure is smaller and less ugly. It requires four screws that are approx 2.5mm in shaft diameter (as measured without threads) The counterbore holes do not need support since there is a 0.2mm bridge. The bridges are easily removed with a knife. I printed the top in transparent so the indicator lights are visible (see photos)
Topics: stl, AVR, Atmel_AVR, thingiverse, atmel, AVRISP, AVR_Programmer, AVRISP MKII, Electronics
11
11
Apr 23, 2021
04/21
by
Eladio Martinez (mafe72)
data
eye 11
favorite 0
comment 0
A simple case for the Blackcat USB ISP/JTAG programmer. I'm including the sketchup file, Remix are welcome! I have an updated version of this case here: https://www.thingiverse.com/thing:2539198
Topics: usb, jtag, reprap, AVR_Programmer, stl, AVR, Blackcat, programmer, thingiverse, case, Electronics
3
3.0
Apr 1, 2021
04/21
by
Joshua Bolland (bollandj)
data
eye 3
favorite 0
comment 0
Clip-fit enclosure for the AVRISP MKII programmer. No screws required!
Topics: thingiverse, Electronics, electronics, programmer, AVR_Programmer, ISP_programmer, AVRisp,...
12
12
Jan 19, 2021
01/21
by
doppiozero (doppiozero)
data
eye 12
favorite 0
comment 0
AVR ISP Programming Board case 28pins ZIF socket is 2.54mm step, 15.24 mm between pins rows Empty pads are for ATtiny85 EIAJ ZIF socket https://app.box.com/s/913ihy23mmxu5hemftgme2fgq0jbtyng
Topics: Electronics, AVR_Programmer, arduino, thingiverse, ISP_programmer, usb_asp, isp_programmer_case, stl
5
5.0
Apr 27, 2021
04/21
by
(Snibelsnaps)
data
eye 5
favorite 0
comment 0
A nice adition to the Pololu USB AVR programmer v2. Makes it easyer to handle and protects the device from shorting out.
Topics: AVR_Programmer, thingiverse, pololu, stl, Pololu_usbavr_v2_box, pololu_usb_avr_v2, Electronics
14
14
Mar 10, 2021
03/21
by
Jason Markham (jasonmrc)
data
eye 14
favorite 0
comment 0
i wanted a programming clip for my arduino pro mini , and looking around here , i found the in circuit clip, problem this was for dip chips. so i remixed it to handle the arduino pro mini , with one side longer to hold the clip under the pcb .. print with ABS to make it more stronger 20 % infill, use standard 2.54mm pins Remixed from http://www.thingiverse.com/thing:708397/#files This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/4gP2Fiujyin
Topics: in crcuit, stl, thingiverse, arduino, avr, 3D Printing, jtag, Arduino pr mini, AVR_Programmer,...
8
8.0
Jun 11, 2021
06/21
by
(doppiozero)
data
eye 8
favorite 0
comment 0
Summary AVR HV RescueBoard, based on MightyOhm rescue shield v2 https://mightyohm.com/blog/products/hv-rescue-shield-2-x/ I removed the 12V step up section to simplify the hardware, on the other side you have to feed the 12V from an external power supply. All files downloadable here:https://app.box.com/s/89zizouqemvu3eak4mnca1wo7uht7j1h Video: https://www.youtube.com/watch?v=EErKo0aTEio Print Settings Printer: BQ Hephestos2 Rafts: No Supports: No Resolution: 200micron Infill: 20%
Topics: Arduino_Nano, programmer, arduino, bricked, AVR_Programmer, stl, thingiverse, fuses, high_voltage,...
4
4.0
Mar 25, 2021
03/21
by
Ruvim Kub (Ruvimkub)
data
eye 4
favorite 0
comment 0
#USBasb case **Links to materials:** * USBISP AVR Programmer - http://ali.pub/3r1jdt * SOIC8 SOP8 - http://ali.pub/3r1jr1 * Monofilament Nylon - http://ali.pub/42l7pc **Links to used tools:** * Scrapers Deburring Trimming Tool - http://ali.pub/3wczyp * Wire cutters - http://ali.pub/3wd0eu Thank you for every review and donation. It motivates and helps to implement new projects! My some other things:
Topics: stl, atmega, AVR_Programmer, usbasp_case, thingiverse, DIY, avr, isp programmer case, USBasb case,...
15
15
Jan 11, 2021
01/21
by
Andreas Middelmann (Makeoneortwo)
data
eye 15
favorite 0
comment 0
Pololu USB AVR Programmer v2 Zweiteiliges Gehäuse, verklebt mit Sekundenkleber. Passt perfekt. Gedruckt mit 0,2 mm Auflösung. Two-part housing, glued with superglue. Fits perfectly. Printed with 0.2 mm resolution. Original Product: https://www.pololu.com/product/3170
Topics: AVR_Programmer, thingiverse, Popolu, v2_, Electronics, stl, Gehä, use, PololuProgrammerv2,...
11
11
Jan 18, 2021
01/21
by
Grzegorz Marchewka (OrangeOwl)
data
eye 11
favorite 0
comment 0
Case for ISP programmer ATB-USBASP 4.0 from ATnel. I recommend to print both parts in vertical orientation with supports.
Topics: case, ATBUSB, AVR_Programmer, electronics, Electronics, thingiverse, programator, USB, cover,...
9
9.0
Apr 4, 2021
04/21
by
Matthew (mattheus)
data
eye 9
favorite 0
comment 0
This thing is case for AvrUsb500v2 -- an open source Atmel AVR Programmer, stk500 V2 compatible, with USB interface (http://www.tuxgraphics.org/electronics/200705/article07052.shtml). But not only case files attached - included full set of documentation to create such AVR programmer.
Topics: thingiverse, Electronics, microcontroller, chips, programmer, AVR, stl, AVR_Studio, AVR910, USBasp,...
3
3.0
Mar 25, 2021
03/21
by
tim bendig (DeatPlayer)
data
eye 3
favorite 0
comment 0
Just a litte case for my "USB ISP USBASP AVR 51 Programmer Adapter" from ebay. (like this one: https://www.ebay.de/itm/USBASP-USBISP-AVR-51-Programmer-Adapter-mit-10-Pin-Kabel-ATMega-ATTiny-ATMEGA128/263576767849 ) I'm still relatively fresh in the area of DLP/Resin. I still haven't figured out how I can prevent these unsightly residues of the support pillars on the surface of the object... # UPDATE - 08.10.2019: - Added some pictures of the case
Topics: stl, ISP_programmer, dlp, AVR_Programmer, anycubic_photon, Programmer, thingiverse, usb_stick,...
6
6.0
Mar 15, 2021
03/21
by
Jon Sagebrand (jonsag)
data
eye 6
favorite 0
comment 0
Enclosure for an Arduino UNO AVR Programmer. Choose width, depth and height. Lid with or withour holes. Schematics, PCB layout and sketches here, https://github.com/jonsag/ardAVRProgrammer. Burn bootloader and program ATmega328/328P, attiny85 and attiny2313. Note that you will have to have additional libraries to use the scad in full. Check the code. /jon
Topics: Atmega328, programmer, thingiverse, enclosure, Arduino_Uno, ATmega328P, arduino, Electronics,...
4
4.0
Apr 16, 2021
04/21
by
glassy (glassy)
data
eye 4
favorite 0
comment 0
Atmel is currently selling its programmer ATMEL ICE programmer as a bare PCB kit http://lt.farnell.com/atmel/atatmel-ice-pcba/debugger-atmel-arm-avr-pcba-kit/dp/2407171?ost=atmel+pcba . This is an enclosure I have designed for this PCB. In few last pictures you can also see a very nice adapter from 50mil to 100mil headers which is designed by alank2 from http://www.eevblog.com/forum. It is featured in this post:...
Topics: ARM, programmer, ATATMEL-ICE-PCBA, debugger, ISP_programmer, PCBA, thingiverse, Enclosure,...
1,419
1.4K
Oct 28, 2017
10/17
by
NYbill
audio
eye 1,419
favorite 0
comment 0
Summary: NYbill talks about flashing firmware to a Atmega328p chip to get a Transistor Tester Kit working. Source: http://hackerpublicradio.org/eps.php?id=2407 A follow up to “The Lost Episode”. Flashing the blank Atmega328p chip to get bring a nonworking Transistor Tester Kit to life. There are a lot of these kits out there. Different shapes, colors, and capabilities. In my case the kit was called a: 2578AY-AT. The firmware for this particular kit is: mega328_color_kit . Pics for the...
Topics: Electronics, kit, tester, AVR programmer, transistor
