3
3.0
Jun 11, 2021
06/21
by
Dirk Kumbrink (DirksBastelbude)
data
eye 3
favorite 0
comment 0
Adapter von 42mm auf 48mm jeweils die Aussenmasse
Topics: Vacuum_Adapter, Adapter, stl, thingiverse, Hobby, Adapter staubsauger
0
0.0
Aug 13, 2022
08/22
by
Fraenk Stone (freshsworld)
data
eye 0
favorite 0
comment 0
Adapter for Triton TRA001 to Amazon Hose 32mm
Topics: hose_adapter, stl, thingiverse, DIY, Vacuum_Adapter, adapter
Adapter was started as a result of lack of pre-planning and alcohol-fueled insight. Fighting a path through broken bottles strewn across beer and urine soaked floors, the band managed to produce about 15 songs during the course of the star-filled December skies of 1994 and about another 10 songs in 1995.
Topic: Adapter
8
8.0
Apr 7, 2021
04/21
by
Claude Theroux (ctheroux)
data
eye 8
favorite 0
comment 0
This openScad file is a pipe, tube or rod adapter. It lets you fit together two pipes of different diameters. Edit the file. Modify the first pipe diameter, the second pipe diameter, the adapter thickness and the total height. Render the file and you will end up with the adapter.
Topics: tube_adapter, pipe_adapter, rod, rod_adapter, tube, pipe, stl, Other, thingiverse, adapter
4
4.0
Apr 1, 2021
04/21
by
Vacant Media (VacantMedia)
data
eye 4
favorite 0
comment 0
Couldn't find one (I'm sure there are some here) so I uploaded my own. Enjoy
Topics: DSLR, DSLR_adapter, Vacuum_Adapter, camera_adapter, thingiverse, adapter, Nikon, adaptor, Camera,...
10
10.0
Jan 12, 2021
01/21
by
Wojciech Mamak (atomic77)
data
eye 10
favorite 0
comment 0
Part 1: Simple T2 to 1.25" adapter. Thicker side: M42x0.75 thread (41.8mm) Thinner side: 1.25 inch Perfectly fits both my T2 adapter and my 8" SW telescope. Works well with my barlow. Unfortunately my SW telescope's 1.25" adapter is too long to focus in my Olympus e520 DSLR. It's too far away, so I had to make something else to connect camera directly to 2" focus tube: Part 2: T2 to 2" adapter. Bottom: M42x0.75 thread (41.8mm) Top: 2" (50.25mm) Thread is not...
Topics: astrophotography, thingiverse, Camera, stl, telescope_adapter, adapter, camera_adapter
2
2.0
Dec 14, 2021
12/21
by
Rafał Kaczmarek (8link)
data
eye 2
favorite 0
comment 0
Basic DIY charging adapter which can be used with a 18650 charger to charge some other form factors of LiIon and LiPo batteries. You need: 4mm nickel plate some 16-14 awg wire some crocodile clips Included clamps are used to connect two or more of the adapters in the charger and make them less prone to pop out, they are optional and are designed for the Vapcell S4 charger. Print with 100% infill
Topics: 18650 adapter, charging adapter, 18650, DIY, stl, thingiverse, adapter, charger adapter, vapcell,...
7
7.0
Jan 20, 2021
01/21
by
GLEB GOLOVIN (skyline-gleb)
data
eye 7
favorite 0
comment 0
Adapter from male 5/8 thread to female 1/4 thread. v2 - more stable, but make sure that it is suitable for your mounting area.
Topics: camera_adapter, thingiverse, tripod_adapter, Parts, adapter, stl
10
10.0
Apr 5, 2021
04/21
by
sommermichel (sommermichel)
data
eye 10
favorite 0
comment 0
you can use j-head hotend or bowden hotend from reprap.cc or reprap-fab.org. You don't need to print a new matched extruder parts, just print an adapter. the extruder body on the picture is suitable for J-head extruder. (Source: http://www.thingiverse.com/thing:18379)
Topics: thingiverse, 3D Printer Parts, jhead_bowdden, Adapter, hotend_adapter, bowden,...
7
7.0
Mar 16, 2021
03/21
by
Sven Keim (ZoozFPV)
data
eye 7
favorite 0
comment 0
20% filling
Topics: Adapter 30x30, Adapter, stl, Adapter 20x20, Samurai, thingiverse, Rotorama, Hobby
5
5.0
Mar 10, 2021
03/21
by
F. Behrens (layershifter)
data
eye 5
favorite 0
comment 0
The inexpensive Scheppach workshop vacuum comes with a cheap, sad, thin hose. To use the vacuum's full capacity, a wider hose can do a lot of good. This adapter allows you to put [a serious 60mm hose](https://www.amazon.de/gp/product/B002R6D8OK) to use on your Scheppach ASP-30-*. While we are on it: Another sad detail about the ASP-30 is its dust filtration capability. Check out my [cheap dust cyclone project](https://www.thingiverse.com/thing:3669095) if you want to solve that! :-) Tip: If the...
Topics: adapter, hose_adapter, stl, thingiverse, workshop, shopvac_adapter, hose, Vacuum_Adapter, Parts,...
5
5.0
Mar 2, 2021
03/21
by
Robert Lazure (RLazure)
data
eye 5
favorite 0
comment 0
This **flange** is intended to slip over a pipe and be held on to plywood. The original use was to make an old English lamp post as a prop for a parade. 3" ABS pipe is used to support the lamp housing. **Flange2.stl** has a 90 mm inner_dia which works well for a 3" diameter ABS pipe. The depth iis 80 mm with a 4 mm flange thickness. The screw hole radius is set at 2.5 mm which works well with #8 screws.
Topics: camera_adapter, abs pipe adapter, abs pipe, thingiverse, pipe adapter, adapter, stl, Props, pendant
10
10.0
Apr 23, 2021
04/21
by
Dimitar Trendafilov (TRENDi77)
data
eye 10
favorite 0
comment 0
Needed things and info on pictures. No need of support. 0.2 mm layer hight. 10-15% infill. PLA for caddy. PLA or ABS for front panels. If You like my work, donate on my web site, please.
Topics: HDD_Adapter, SSD_Adapter, stl, 525_hdd_adapter, thingiverse, Computer
3
3.0
Apr 4, 2021
04/21
by
Cesar Mattos (FearL0rd)
data
eye 3
favorite 0
comment 0
This is an adapter to screw 1.25" filter or reducer to Clip on Canon DLSR Camera You must print it with superior quality, I used 0.1mm layer height You will not get good thread with 0.2 layer height Thanks, Enjoy! Print Settings Printer: ANET AT4 Rafts: Yes Supports: No Resolution: 0.1mm Infill: 15%
Topics: thingiverse, canon_adapter, stl, Physics & Astronomy, filter_adapter, telescope_adapter
4
4.0
Jan 6, 2021
01/21
by
sam ortz (ortizimo)
data
eye 4
favorite 0
comment 0
Barbell/Dumbell adapters. My weights where not made for the barbell so I made these from scratch. Tested the 10lbs and 2.5lbs adapters but not the 5lbs yet. Contact me if anything is wrong or needs adjustments.
Topics: stl, dumbell, dumbell adapter, Sport & Outdoors, adapter, barbell adapter, thingiverse
3
3.0
Apr 3, 2021
04/21
by
Thomas Rieger (Poliflex)
data
eye 3
favorite 0
comment 0
Adapts from ID Ø 77mm (OD 80mm) to ID Ø 35.5mm (OD 38.5mm).
Topics: thingiverse, vaccum_cleaner, hose_adapter, adapter, stl, DIY, Vacuum_Adapter
5
5.0
Mar 22, 2021
03/21
by
Nick Daley (zaphodus)
data
eye 5
favorite 0
comment 0
Jigsaw table adapter block. This is for a simple jigsaw table for my shop. It is very basic and can be made using your cordless drill, jigsaw and a few other simple tools. You can go to your Home Depot/ Bunnings and get them to cut the base top and sides to the right dimensions.
Topics: stl, Hobby, Table_Adapter, jigsaw_table_adapter, thingiverse, Jigsaw, adapter
3
3.0
Jan 5, 2021
01/21
by
Con B (bartrail)
data
eye 3
favorite 0
comment 0
This Dyson vacuum adapter simply enables a flat end because the dyson end has this clippy end ;-) Print with PLA in 0.2mm with 3 outer layers. no supports needed.
Topics: stl, dyson, thingiverse, Vacuum_Adapter, adapter, dyson_adapter, Replacement Parts
3
3.0
Jan 7, 2021
01/21
by
Hugo González (protoidea)
data
eye 3
favorite 0
comment 0
An adapter of my non-proffesional tripod to a 3/8" screw for my spyglass.
Topics: tripod_mount, tripod_adapter, tripod_bolt, stl, bolt_adapter, screw_adapter, thingiverse,...
2
2.0
Oct 29, 2021
10/21
by
Dirk Kumbrink (DirksBastelbude)
data
eye 2
favorite 0
comment 0
Wichtig es sind die Innenmaße 51mm zu 41mm Es sollte so möglich sein HT Rohre zu verbinden, Ich hab extra etwas größer gemacht... . ICH HABE ES NOCH NICHT GEDRUCKT.....!!!
Topics: adapter, thingiverse, DIY, stl, Vacuum_Adapter
4
4.0
Mar 26, 2021
03/21
by
Hartmut Wagener (Minihawk)
data
eye 4
favorite 0
comment 0
This adapter can be used to put a AA-battery in a thing that needs the big D-type cells. AA-batteries are smaller a bit, so it is recomended to put in some small metal-pieces (b. e. 5 one-cent-pieces, €-currency) at the bottom.
Topics: stl, AA-adapter, thingiverse, battery-adapter, D-adapter, Household
3
3.0
Jan 6, 2021
01/21
by
Luke NoOne (lukeone)
data
eye 3
favorite 0
comment 0
Have Fun!
Topics: y_adapter, tube_adapter, stl, adapter, thingiverse, Outdoor & Garden
1
1.0
Aug 22, 2021
08/21
by
Alexander Rakus (Blu3D3vil)
data
eye 1
favorite 0
comment 0
########## Deutsch ########## Adapter / Gelenk zur Montage an Ablaufgarnitur. Verbinden von Armaturen Zugstange mit Querstange der Ablaufgarnitur. Bohrungen: Ø 6 mm Loch und schlitz für M4 Schraube / Mutter ########## English ########## Adapter for mounting on a waste set. Connection of fittings pull rod with cross rod of the waste set. Bores: Ø 6 mm Hole and slot for M4 screw / nu
Topics: WC-Adapter, bathroom, tools, Bathroom, Abfluss-Adapter, Waschbecken, stl, thingiverse, adapter
3
3.0
Jan 19, 2022
01/22
by
Bob Ross (The_Rad_One_1)
data
eye 3
favorite 0
comment 0
PLA 50% infill
Topics: Hose, Hose Adapter, thingiverse, Vacuum_Adapter, Table, Vacuum, Adapter, Hobby, stl
5
5.0
Apr 20, 2021
04/21
by
Jim Davis (deependstudios)
data
eye 5
favorite 0
comment 0
Dust port adapter for Grizzly's G0833P Hybrid saw to a shop vac. Shop Vac hose must be 57-58mm od to fit this adapter. Design is 97mm ID for the saw side, 58mm ID for the vac. Walls are 2mm-2.77mm through the cone section. Should require no support if printed with the model wide-end down to the build plate. Despite it's large size, this should use under 100g of Material to print as described.
Topics: thingiverse, stl, Adapter, Parts, Cone Adapter, Vacuum Adapter, Dust Collector, G0833P
5
5.0
Mar 5, 2021
03/21
by
(BlueMacGyver)
data
eye 5
favorite 0
comment 0
This is a wheel to axle adapter for an RC. It allows you to use hex axle wheels with D style axles. They measure about 3mm tall by 12mm wide and the D shaped hole is 4mm. Depending on your printer you may have to sand parts. I printed this with the CR-10 100% fill.
Topics: hex adapter, rc axle adapter, stl, R/C Vehicles, adapter, thingiverse
4
4.0
Mar 15, 2021
03/21
by
Emmanuel FARHI (farhi)
data
eye 4
favorite 0
comment 0
This is an adapter to recycle an old manual focus camera lens into a telescope. It fits onto a Sony E-mount bayonet. Manual, old lenses are cheap and of very good quality for their price. This way you can get e.g. a 200-400 mm scope of excellent quality. Much cheaper than buying a proper guide scope. What you need: - an **old camera lens**, with manual focus and aperture rings. I would recommend full manual old school lenses, cheap on ebay. In the example photo, I use a Soligor 60-300mm/F4-5.6...
Topics: lens, telescope, thingiverse, camera_adapter, Lens_Adapter, Camera, eyepiece_adapter, stl
5
5.0
Jan 8, 2021
01/21
by
Denise Lee (CorrugatorSupercilii)
data
eye 5
favorite 0
comment 0
The jaw grip is best printed sideways on a brim... Design tolerence is 100um, to be printed 100% infill @ 0.1mm layer Video: https://youtu.be/850hFfoimws https://youtu.be/SaDBcLdUHZM The suction cup hook is no longer available from Ikea, a similar version can be brought from AliExpress: https://www.aliexpress.com/item/4000756088920.html?spm=a2g0s.9042311.0.0.11024c4dfNuKJo
Topics: astrophotography, stl, binocular_adapter, telescope_adapter, eyepiece_adapter, Mobile Phone,...
4
4.0
Mar 15, 2021
03/21
by
Leah C (LeahC)
data
eye 4
favorite 0
comment 0
Dust bag adapter that fits an Einhell buzzsaw and Makita dust bag. The dimensions are: Small end :35mm outside diameter. Large end :37mm outside diameter
Topics: thingiverse, adapter, DIY, Vacuum_Adapter, stl
4
4.0
Jan 16, 2021
01/21
by
Dmitry Yarko (DYarko)
data
eye 4
favorite 0
comment 0
This is a simple adapter to use standard softbox (*four screw) with bowens bayonet.
Topics: bowens, Camera, Bowens_adapter, Softbox_adapter, thingiverse, softbox, adapter, stl
3
3.0
Apr 4, 2021
04/21
by
Avishai Kruger (AvishaiKruger)
data
eye 3
favorite 0
comment 0
The design allows for suspension of a divergent lens under the surgical microscope. Please note that we assumes no personal responsibility for the safety of the product. Use at your own risk. enjoy!
Topics: thingiverse, microscope, adapter, stl, Other, microscope_adapter
3
3.0
May 20, 2021
05/21
by
Derek Tata (derektata)
data
eye 3
favorite 0
comment 0
Drawn and modeled in Fusion360. So the other day I found myself in a bit of a pickle, needing to run some submersible pumps for cloning irrigation systems; I had everything but the fittings to make it work, so I've made an adapter with 3/8" threads that will fit 1/2" PVC pipe on the other side. It's been made to print very easily without any hassle, PrusaSlicer photo included shows print orientation. The PVC pipe is friction fit in place, and is very snug. I hope this helps somebody...
Topics: Adapter, thingiverse, DIY, PVC, PVC Adapter, stl
10
10.0
Apr 5, 2021
04/21
by
(robwhi)
data
eye 10
favorite 0
comment 0
Two 40-60 mm fan adapters. Height: 26 mm Screw holes are 4 mm to make it easier to get the screws to fit even though fan screws are 3 mm. One straight and one with a 45 mm twist at one end in case this is something you might need. I designed this as backup for: http://www.thingiverse.com/thing:190298 in case the 40 mm fan doesn't provide enough airflow. -These have not yet been printed by me so: "work in progress". -Filed under 'Hobby' since these can be used for any application....
Topics: thingiverse, fan, adapter, fan_adapter, stl, Hobby
2
2.0
Jan 18, 2022
01/22
by
Luca Tomat (eltee)
data
eye 2
favorite 0
comment 0
This is a Vacuum Hose Adapter to connect my Lavor 310000813 vacuum cleaner to my Cyclon separator. The adapter is suited to connect a 40mm (external diameter) flexible hose to a 50.5mm (external diameter) rigid/plastic pipe, however i provide the Fusion 360 file where you can freely change all the diameters to suit your needs (everything is parametrized). This item is designed to be printed without support, only with a Brim to make it stick better to the heat-bed and in fact it printed without...
Topics: thingiverse, Adapter, DIY, Vacuum Hose Adapter, stl
4
4.0
Jan 5, 2021
01/21
by
Nikita Ignatov (flatmapski)
data
eye 4
favorite 0
comment 0
Adapter for a 16mm tube to fit into a pillow block bearing of 20mm. The freecad file can be changed to different parameter
Topics: tube_adapter, stl, 20mm, rod_adapter, 16mm, linear_rail, adapter, Shaft, thingiverse,...
Topics: manualzz, manuals, Siemens SIMATIC PC Adapter TS Adapter manual, SIMATIC PC Adapter TS Adapter pdf...
11
11
Apr 23, 2020
04/20
by
Center for Accessible Technology in Sign
movies
eye 11
favorite 0
comment 0
ASL vocabulary
Topic: adapter,converter
I still have one each of FU-1H and FU-2R unit but my FX-110 was long lost during a field service visit. They make use of the FX-110 as a current meter and its scale for transistor and resistor test. Up to this moment information for older devices are no longer available from Sanwa in "discontinued" section.
Topics: Multimeter, adapter
Topics: manualzz, manuals, Siemens SIMATIC PC Adapter TS Adapter manual, SIMATIC PC Adapter TS Adapter pdf...
3
3.0
Mar 2, 2021
03/21
by
Mats Skölving (Matsen75)
data
eye 3
favorite 0
comment 0
Adapter for Makita HS7101 to Ø32 mm hose. Best printed in TPU or similar.
Topics: adapter, thingiverse, stl, Vacuum_Adapter, Parts, Makita
3
3.0
Jun 19, 2021
06/21
by
Joe Conlan (j_conlan1970)
data
eye 3
favorite 0
comment 0
2" to 1-1/4" Shopvac adapter
Topics: thingiverse, shopvac_adapter, stl, Vacuum_Adapter, Parts
1
1.0
Apr 19, 2022
04/22
by
Lukas Sistig (Exatron)
data
eye 1
favorite 0
comment 0
HQD Key Chain Adapter
Topics: HQD Adapter, HQD, thingiverse, Other, Adapter, stl
11
11
Jan 18, 2021
01/21
by
Boris Humberg (ThinkSolutions)
data
eye 11
favorite 0
comment 0
Connect Ryobi Sander Model # S652DGK 36.1 mm OD outlet to 31 mm OD vacuum hose nozel. Both ends have been design with a small ID taper for a snug fit.
Topics: Sander Vacuum Adapter, thingiverse, Parts, adapter, stl
0
0.0
Aug 13, 2022
08/22
by
Manuel Di Giulio (NueLSooN)
data
eye 0
favorite 0
comment 0
Hello guys! This kit of "pulley adapter" is born to make more strong the SYL-08 Electric Skateboard, what do i mean? With this pulley adapter kit, you will be able to reduce the ratio that is created between motor pinion and wheel crown, consequently, same motors, same esc, same battery, much more torque at the expense of a lower top speed! Each pulley adapter starts from a number of 72 "female" teeth, which are engaged by interference on the original pulley (in our case, of...
Topics: 72T pulley adapter, stl, thingiverse, DIY, HTD 5M ADAPTER, Pulley Adapter
5
5.0
Jun 10, 2021
06/21
by
Montana Monk (MontanaMonk)
data
eye 5
favorite 0
comment 0
I had already designed a mount for my iPhone 12 when I saw the one designed by falconphysics. I resized parts and redesigned the clamp for the scopes so that the jaw was captured in the frame. I also used threaded rods in place of the printed screws and used a rod and t-nut to join the frame and the phone mount. The 1/4-20 threaded rod for tightening the frame to the scope has a slot filed so that some tiny metal screws can retain it in the jaw. All the knobs are threaded for the rods and a...
Topics: telescope_adapter, Mobile Phone, binocular_adapter, stl, thingiverse, microscope_adapter, iPhone...
3
3.0
Mar 25, 2021
03/21
by
Rob Amberwitch (Dr_One_aka_Layer_Man)
data
eye 3
favorite 0
comment 0
Foxeer Falcor Mini - asapter 28mm - Japs
Topics: stl, R/C Vehicles, Falcor, Adapter, Falcor adapter, thingiverse, Foxeer Falcor Adapter
2
2.0
Jan 18, 2022
01/22
by
Hugo González (protoidea)
data
eye 2
favorite 0
comment 0
These are a set of two lamp holders adapters for Neewer's softbox, for one bulb and two bulbs. A set of standard 3/8" nuts and bolts are used to attach the lamp holders to the adapters. This is the model of the softbox: https://www.amazon.es/gp/product/B01H35CM4G/
Topics: tripod_adapter, Neewer, thingiverse, softbox, Softbox_adapter, adapter, DIY, stl, lamp_holder
9
9.0
Jan 18, 2021
01/21
by
Graham Ornstein (gornstein123)
data
eye 9
favorite 0
comment 0
This is a two prong to two prong GoPro Adapter. I will be using this to attach a GoPro mount to another GoPro mount, specifically the bike mount to a shotgun mount to enable me to attach a gimbal to the bike mount, and the other end to whatever I want.
Topics: camera_adapter, Camera, camera, GoPro_Mount, Gopro_Adapter, thingiverse, adapter, stl, GoPro
Topics: manualslib, manuals, Adapter module, ADTRAN Manuals Adapter
4
4.0
May 1, 2021
05/21
by
Krishanu Ray (KrishanuAR)
data
eye 4
favorite 0
comment 0
Quick release adapter that attaches to the top of a Dolica Proline tripod. Not sure if the same mating system is usable in other tripod types.
Topics: stl, dolica, Tools, adapter, thingiverse, tripod_adapter
