12 p., ill., 28 cm., trade catalog
Topics: fencing -- catalogs, Division 32, chain link fence, Chain link fences and gates
10
10.0
Jun 10, 2021
06/21
by
richard Taylor (rltaylor3)
data
eye 10
favorite 0
comment 0
Made with 4 sides in section so it doesn't require rafting or supports.
Topics: thingiverse, Keychains, chain_link, stl
40 p., ill., 28 cm., trade catalog
Topics: fencing -- catalogs, Division 32, chain link fence, chain-link fencing, wire baskets, wire screens
19 p., ill., 28 cm., trade catalog
Topics: Fences -- catalogs, Division 32, chain link fence, site improvements, chain link fencing, wire...
109 p., ill., 28 cm., trade catalog and letter from manufacturer
Topics: fences -- catalogs, Division 32, chain-link fence, wire fences, chain link wire fences, wire fence,...
4 p; ill.; 27 cm; trade catalog;
Topics: Fences - - catalogs, Division 32, chain link
4 p; ill.; 27 cm; trade catalog;
Topics: Fences - - catalogs, Division 32, chain link
4 p; ill.; 27 cm; trade catalog;
Topics: Fences - - catalogs, Division 32, chain link
4 p; ill.; 27 cm; trade catalog;
Topics: Fences - - catalogs, Division 32, chain link
4 p; ill.; 27 cm; trade catalog;
Topics: Fences - - catalogs, Division 32, chain link
6
6.0
Apr 8, 2021
04/21
by
Tania Samal (taniasamal)
data
eye 6
favorite 0
comment 0
A chunky looking chain link.
Topics: chain_link, links, stl, Other, chain, thingiverse
9
9.0
Mar 20, 2021
03/21
by
Anton Gabrie (ThinkMaking)
data
eye 9
favorite 0
comment 0
Just a single chain link used to easily test filament strength.
Topics: thingiverse, Link, Chain-Link, Chain, Other, stl
10
10.0
Jan 18, 2021
01/21
by
JM Tosses (makebreakrepeat)
data
eye 10
favorite 0
comment 0
*[Make. Break. Repeat! on Facebook](https://www.facebook.com/makebreakrepeat/): Updates on Tuesdays and Thursdays!* The BloqChain is my answer to the 3D printed chain link quest. I did a fair amount of research on this subject as I needed a sturdy chain to hang my (upcoming) PowerBloq thing from the workshop ceiling. None of the chains I found were able to deliver my three asks: - Two parts for easy assembly - Sturdy at 0% infill - No weakness introduced due to FDM printing The resulting chain...
Topics: half chain, chain lock, chain parts, chains, keychain, bloqchain, chain, thingiverse, half chain...
4 p., ill., 28 cm, trade catalog
Topics: fencing -- catalogs, Division 32, chain link fence -- catalogs
3
3.0
Jun 6, 2021
06/21
by
Adrian Szymanski (Radegar)
data
eye 3
favorite 0
comment 0
This is modified chain link. I wanted to have better connections between links because I wasn't satisfied with the original one which were very lousy. Current version is hard to disassemble and it doesn't bend like the old one when you put more chain links. I've also added tiny curves next to the pin points to decrease friction.
Topics: thingiverse, chain_link, stl, Anet_A8, 3D Printing
28 p., ill., 28 cm., trade catalog
Topics: fences -- catalogs, Division 32, wire fences, iron fence, chain-link security fence, barbed wire...
8
8.0
Apr 8, 2021
04/21
by
Tania Samal (taniasamal)
data
eye 8
favorite 0
comment 0
Chain link. A couple of different ones to choose from. A chunky, square looking one and a smoother, rounder version.
Topics: 3D Printing, chain_link, links, stl, chain, thingiverse
8
8.0
Jan 20, 2021
01/21
by
Sebastien Tremblay (Supernova_6969)
data
eye 8
favorite 0
comment 0
made this to lighten up the full tube long chain link. in terms of weight you don't really save, but it looks nice!
Topics: 3D Printer Parts, anet a8, thingiverse, chain link, stl
5
5.0
Apr 16, 2021
04/21
by
Karl Schulze (Bantum_Works)
data
eye 5
favorite 0
comment 0
Revised & strengthened version of 'Chain Link' by bqlabs: • Drag Chain : http://www.thingiverse.com/thing:397273 • Other parts that will fit the same configuration / system can be found here : http://www.thingiverse.com/thing:959297/#files Cheers, Bantum ...
Topics: 3D Printer Parts, thingiverse, stl, Chain Link, Drag Chain
4
4.0
Jun 6, 2021
06/21
by
Michele Brami (mbrami)
data
eye 4
favorite 0
comment 0
Shower basket for fitting soaps and other accessories. You can use your own chain/hanger or also download a chain link that goes with the basket. You winn need 4 sets of chain links: 2 on the back with 8 links each, and two on the front with 9 links each. The basket and the links print without supports.
Topics: thingiverse, chain_link, Bathroom, shower_accessories, basket, stl, shower
7
7.0
Jan 20, 2021
01/21
by
Carl (Stellar Innovation) (stellarinnovation)
data
eye 7
favorite 0
comment 0
Still work in progress, but here you go @Zelkins. Customized version of https://www.thingiverse.com/thing:2983935 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2983935 EDIT: center link is supposed to be 8mm wide (not 4). Sorry about that!
Topics: customized, Bracelets, watch, thingiverse, chain_link, neopixel_ring, stl
7
7.0
Jan 20, 2021
01/21
by
Sebastien Tremblay (Supernova_6969)
data
eye 7
favorite 0
comment 0
made this because my printer had a hard time printing the original thin links. the loop part (the female part), was too skiny. I made it 1.2mm so it's actually 3 layers wide, and it printed perfect.
Topics: 3D Printer Parts, anet a8, thingiverse, chain link, stl
52 p., ill., 14 x 22 cm., trade catalog
Topics: fences -- catalogs, Division 32, wire fences, chain link fence, chain link fencing, industrial...
4
4.0
Mar 5, 2021
03/21
by
Chris (SmilingImpact)
data
eye 4
favorite 0
comment 0
I made this for a solar panel project in my yard and am sharing it here. 4.18.19 added 30 degree version.
Topics: solar, DIY, stl, mount, 45_degree, chain link, thingiverse
0
0.0
Aug 13, 2022
08/22
by
Ma Ze (zitcon_home)
data
eye 0
favorite 0
comment 0
###Wall Clock - Chain Link: A small craft project First of all you'll need a High Torque Movement Mechanism Clockwork if you want to craft this wall clock. I bought this one from amazon: https://www.amazon.de/gp/product/B076ZRH5KL Description of the files: 1. Chain Clock Chassis: This is the chassis for the clockwork. The high torque clockwork with 30.5 x 13 x 2 centimetres dimensions will fit inside. I have printed mine in red with resolution 0.28 and infill 15%. Use support for this part. 2....
Topics: diy, nerdy, stl, chain link, thingiverse, Other, wall clock
9
9.0
Apr 27, 2021
04/21
by
James Heaney (jheaney1)
data
eye 9
favorite 0
comment 0
This is a kit for making 3d printed chains. I've included 4mm, 5mm, and 6mm radius chains. Each file has a circle of links, which allows you to create files with any length of chain. Lay each link so it is offset by 90 degrees from its neighbors and doesn't intersect other links. Once they're printed, they will come off the printer as an articulating chain. You'll need 123D Design to edit the .123dx files. You can also edit the .stl files with your favorite program. These chains do not require...
Topics: thingiverse, link, chain, 123D_Design, stl, Parts, chain_link
5
5.0
Apr 12, 2021
04/21
by
REVOLUTION MEDIA (REVOLUTIONi3)
data
eye 5
favorite 0
comment 0
This is a longer link to allow more precision in your cable chain management. A link that is extra in length only, plus I am now strengthening the designs of the link. There is more support in the male side link as some times they break there. Also support between the extension. The Original Cable Chain this is remixed from is http://www.thingiverse.com/thing:11978 and this will work with the REVOLUTIONi3 cable chain system.
Topics: thingiverse, prusa_i3_rework, extra_long_cable_chain_link, stl, cable_chain_management,...
4
4.0
Apr 13, 2021
04/21
by
Sean Murdock (bigsean1225)
data
eye 4
favorite 0
comment 0
Simple chain link. Print as many as you want and then connect with pins. May take some wearing in to move all the way.
Topics: thingiverse, Link, Chain, Learning, Moving, mechanic, stl, Connect, Chain_link
7
7.0
Jan 20, 2021
01/21
by
Sebastien Tremblay (Supernova_6969)
data
eye 7
favorite 0
comment 0
made this mainly to be able to use the stock, factory screws. with the original model, the screw wasn't long enough to grab onto the bearing enclosure. it's also taller, but i don't think that changes much (that was based on a silly mistake installing the original, but doesn't seem to change anything, so i'm leaving it as is).
Topics: 3D Printer Parts, anet a8, thingiverse, chain link fence, stl
4
4.0
Jan 4, 2021
01/21
by
Drew Nix (Modelsharing)
data
eye 4
favorite 0
comment 0
Created with Cinema4D. High poly count on each file. Choose from linear chain link, radial, or single link.
Topics: stl, model, chain link, chain, keychain, thingiverse, chain links, Models
7
7.0
Jan 20, 2021
01/21
by
Carl (Stellar Innovation) (stellarinnovation)
data
eye 7
favorite 0
comment 0
A customizable chain link, from which you can create all sorts of bracelets, chains and straps. After a few failed design iterations (weak axles, problematic overhangs, chains that fell apart) I settled for this one. It lies flat on the print bed and the axles are printed horizontally. It takes a little force to snap the links together, but the chain will stay in one piece. The basic parts of the chain are called type-A (a link with axles) and type-B (a link with bushings). Additional parts...
Topics: Bracelets, bracelet, chain, bling, thingiverse, chain_link, link, jewelry, stl
4
4.0
Mar 15, 2021
03/21
by
Brett Thomas (BrettThomas)
data
eye 4
favorite 0
comment 0
This is an easy way to create a super fine chain link fence, net, screen or grid pattern, using a hack in your slicer program (I used Cura, but should work in other programs as well). Creating a model for any type of screen or chain link fencing can be difficult and tedious.. I figured out this quick hack using the FIRST TWO LAYERS OF A RAFT to create a ultra fine and flexible screen like material. Basic steps: 1, Import the attached "sizing block" into Cura, then scale it (X and Y...
Topics: thingiverse, Buildings & Structures, netting, stl, chain_link_fence, grate, screen, grid
3
3.0
Apr 4, 2021
04/21
by
Ja In (chimeranzl)
data
eye 3
favorite 0
comment 0
Ender 5 Z-Axis brackets for cable chain. Use with Johnnie Whiskey v3 chain links (print 26 of them if V3, should work with his other revisions too though) https://www.thingiverse.com/thing:2920060 The adapters are specifically designed to work with the Ender 5 print bed, they have extra support and the bed bracket has as a slot for a cable tie to also help provide some bed strain relief (do not over tighten the cable tie, it simply needs to pull the wiring tight enough against the bracket to...
Topics: thingiverse, 3D Printer Parts, Chain Adapter, stl, Chain Link, Ender 5
3
3.0
Apr 8, 2021
04/21
by
Ted Sali (MaximusNoobus)
data
eye 3
favorite 0
comment 0
A simple solution to run hoses along a chain link fence without using zip ties or metal hooks that can snag and scratch. I want to run hoses for my automatic watering system, while keeping them off the ground so I can mow the grass easily. This simple s-hook allows the hose to hang free, and can be easily slipped off and on as it's not a captive solution. Printed at low quality settings with bumped up infill to provide some durability. Used PLA on hand, would work well with PETG or ABS.
Topics: hanger, Outdoor & Garden, stl, hook, chain, link, thingiverse, mount, Chain-link, Hose
11
11
Jan 18, 2021
01/21
by
(ariuskooo)
data
eye 11
favorite 0
comment 0
Previous chain links has too much slack in them, so i edited them a bit and those run smoother now. Ive also added slimmer version with conversion for bed chain, as the original one was hitting Y corner from time to time.
Topics: 3D Printer Parts, thingiverse, prusa_i3_mk2, cable_chain, chain_link, stl
53 p., ill., 28 cm., trade catalog with hand written price list
Topics: fences -- catalogs, Division 32, wire fences, chain link fences, steel fence posts
3
3.0
Apr 4, 2021
04/21
by
matthew passarelli (Passman3d)
data
eye 3
favorite 0
comment 0
Cable Chain for the sovol sv01, carriage and gantry secure with 3mm nuts and bolts, I used 18 chain links but you may need one more or one less. Chain clips have to be pressed in with force sometimes, plyers are ok just be gentle, The chain links were taken from an ender 3 chain I found a while ago but cant find it any more when i search, enjoy!
Topics: thingiverse, 3D Printer Accessories, sovol, sv01, cable chain, stl, chain link, mp3d
4
4.0
Apr 16, 2021
04/21
by
CBU Engineering (CBUEngineering)
data
eye 4
favorite 0
comment 0
This interlocking chain mail is made of many hexagonal parts which overlap eachother
Topics: chain_link, Hexagon, thingiverse, stl, supportless, Design, Engineering, Fun, Mesh, CBU,...
8
8.0
Jan 16, 2021
01/21
by
Steven Tsan (T-san)
data
eye 8
favorite 0
comment 0
It not exactly the same as the M27 links but I tried my best to make it as similar as possible.
Topics: bullet, 556_NATO, thingiverse, Sport & Outdoors, chain_link, AR-15, rifle, stl
4
4.0
Mar 8, 2021
03/21
by
Marc-Andre Auger (Mister_Ogre)
data
eye 4
favorite 0
comment 0
Inspired by falconman, but his design was not what i was looking for. So this design i made is for giving me some space for the meanwell PSU upgrade from Hackaday. The vanilla panels are for the printer without mods, just rising it up. Also there are half panels for those with smaller print area. Hardware needed: For the plate - 6X 35mm M3 Hex Riser - 6X 10mm M3 Screws For the board - 4X 35mm M3 Hex Riser Side panel with PSU mod: - 2X 10mm M3 screws - 1X M3 nut - Also will need the 2 small...
Topics: Mp_select_mini, chain_link, stl, thingiverse, panels, riser, 3D Printer Accessories, MPSM
5
5.0
Mar 15, 2021
03/21
by
Stephen Miles (Stevie135s)
data
eye 5
favorite 0
comment 0
This is a bed drag chain for the Tenlog D3 Pro. It guides the cable into gradual bends to extend it's life. I have also used bowden tube to prevent kinks forming. This is not absolutely necessary. Update :: 17/01/21 :: bottom bracket tidied up and additional part for a bowden
Topics: drag chain, thingiverse, Tenlog, chain link, Tenlog_D3_Pro, stl, 3D Printer Accessories
13 p., ill., 7 x 15 cm., trade catalog (German language)
Topics: Fences -- Division 32, wire fences, chain link fence, woven wire fencing, fence gates
4
4.0
Mar 21, 2021
03/21
by
CBU Engineering (CBUEngineering)
data
eye 4
favorite 0
comment 0
Interlocking cubes printed without support, made to flex and move
Topics: chain_mail, CBU, stl, Engineering, fun, design, Cube, interlocking, supportless, thingiverse,...
These are images of the packaging for the Do-It-Yourself Chain Link Fence Kit; manufactured by National Fence Company, Part Number 71416; in the late 1980's. Sold by Channel Lumber. Package dimensions are: 9" width by 11 1/2" height; the post cap is 2 1/2 outside diameter. No copyright notice; Public Domain as per Rule 5 of the U.S. Copyright Statutes. Ebook created by Gerard Arthus.
Topics: chain link fence, national fence company, do-it-yourself, kit, 71416, instructions, assembly
Guides, Manuals, Handbooks on how to install fencing.
Topics: Fence, Fencing, Farm, Ranch, Animals, Land, Hedge, Chain Link, Barbed Wire, Gate, Cattle
18 p., ill., 28 cm., trade catalog
Topics: architectural metal work -- catalogs, irowork -- catalogs, Division 32, fences and gates, chain...
44 p., illus., 27 x 21 cm, trade catalog
Topics: Fences - metal and wire, fences and gates, Division 32, exterior improvements, chain link fence
13
13
Jan 10, 2021
01/21
by
Jesse Filson (jessefilson94)
data
eye 13
favorite 0
comment 0
THIS IS MY ADAPTATION TO THE 3D PRINTED DRAG CHAIN IN PLA. I'VE NEVER GOTTEN ANY DESIGN TO WORK FOR DRAG CHAINS PRINTING IN PLA BUT THIS TYPE OF DESIGN SEEMS TO WORK INSTEAD OF HAVING EVERY DRAG CHAIN LINK SPLIT IN HALF. YOU CAN ONLY WEAVE YOUR WIRES IN AND OUT OF EACH LOOP. I'M THINKING THIS WILL WORK WELL WITH BIGGER PRINTERS/CNC. THE OTHER THOUGHT IS TO ADD A LOOP TO HOLD THE WIRES BUT EVERY LINK WOULD HAVE TO BE PRINTED AT 45 DEGREES TO KEEP EVERYTHING INTACT AFTER SUPPORT. IF YOU FOUND...
Topics: cable_chain, thingiverse, stl, 3D Printer Accessories, chain_link, PLA, drag_chain, cable_carrier
42 p., illus., 28 cm, trade catalog
Topics: Fences - metal and wire, fences and gates, Division 32, exterior improvements, chain link fence
63 p., illus., 28 cm, trade catalog, Catalog No. 332-B, May 1934
Topics: Fences - metal and wire, fences and gates, Division 32, exterior improvements, chain link fence
