598
598
Jul 29, 2013
07/13
by
The Bomb Busters
audio
eye 598
favorite 0
comment 0
Все же гаражное музыкальное общество всегда выгодно отличалось дуэтами. Которые, не смотря на малочисленность состава, по мощности энергии всегда дадут фору какой-нибудь волосатой metal банде. И The Bomb Busters принадлежат к числу таких. Перегруженные гитарные ходы из до...
Topics: Garage rock, Garage punk
3
3.0
Jan 6, 2021
01/21
by
Aaron Sch (schum173)
data
eye 3
favorite 0
comment 0
My car has an integrated programmable remote, so I wanted somewhere to store the clickers where they would be accessible and the buttons wouldn't accidentally get pressed. Designed this to hold both remotes. Remotes can be used on while on the holder or can easily be lifted off the holder to take with if going in a different car.
Topics: garage_door_remote, stl, garage, Household, garage_opener, Garage_organization, thingiverse
2
2.0
Apr 19, 2022
04/22
by
David Dzikowski (coffeeandubuntu)
data
eye 2
favorite 0
comment 0
My kids kept knocking the garage safety sensor out of alignment with their bikes, balls, etc. so I designed a sensor protector. A couple screws and now no more misaligned safety sensors. Print flat-side down with supports. I'm also including a custom designed bracket because the bracket that came with my garage door safety sensors were too long. Print the bracket on its side with supports. I highly recommend printing with something like PETG for strength.
Topics: garage_opener, thingiverse, garage, Garage_Door, stl, DIY
4
4.0
Mar 20, 2021
03/21
by
Dan Rubel (danrubel)
data
eye 4
favorite 0
comment 0
Small clip for a garage chain that trips the "stop moving" lever. * 2014-11-04 - Modified scad to easily change the distance between the clips, reduced the distance to better fit the chain, and reduced size of bump at the end of each clip so that it better fits between the chain links. * 2014-11-05 - 40cm too small... adjusted distance between clips to 52cm * 2014-11-09 - final tweak 53cm and reduced height to 4.5 mm... works! * 2017-12-17 - small tweaks to prevent occasional...
Topics: garage, DIY, thingiverse, garage_chain, garage_opener, stl
5
5.0
Jan 21, 2021
01/21
by
Marco Fichera (thelog)
data
eye 5
favorite 0
comment 0
a small system to lock the garage door sensor if your sensor is of different shape, you can take remix it using this idea for greater resistance the object is held together by three screws
Topics: Garage_Door, thingiverse, garage_opener, garage, Other, stl
2
2.0
Apr 19, 2022
04/22
by
David Dzikowski (coffeeandubuntu)
data
eye 2
favorite 0
comment 0
My kids kept knocking the garage safety sensor out of alignment with their bikes, balls, etc. so I designed a sensor protector. A couple screws and now no more misaligned safety sensors. Print flat-side down with supports. I'm also including a custom designed bracket because the bracket that came with my garage door safety sensors were too long. Print the bracket on its side with supports. I highly recommend printing with something like PETG for strength.
Topics: garage_opener, thingiverse, garage, Garage_Door, stl, Hobby
4
4.0
Mar 8, 2021
03/21
by
Ron Schauer (ronschauer)
data
eye 4
favorite 0
comment 0
This is my version of a commercially available garage door opener cushion and expansion joint. The problem that prompted this was that in summertime our wooden garage doors would shrink slightly so that the door openers, if not adjusted, would not fully close them. So insects and debris would have a free path into the garage despite the bottom edge rubber "seal". And then in the wintertime the doors would expand slightly (it rains mainly in the winter here) and so they would slam...
Topics: Garage_Door, stl, thingiverse, Automotive, cushion, Garage door opener, garage_opener, Garage
3
3.0
Apr 30, 2021
04/21
by
Dan Meservy (dandm)
data
eye 3
favorite 0
comment 0
This is a replacement for an old, broken Wayne Dalton garage door opener that hangs on the garage wall. Mine snapped together with the back plate fairly easily with a little force. The print should be printed with the back down and with supports.
Topics: stl, garage_door_remote, garage, garage_opener, Replacement Parts, thingiverse, Garage_Door
Indulgent Heavy Garage-Psych amp slaughterers "Thee Oh Sees" - currently touring, which is why this is here, and why i'm going to See Them There. 1 - Web. 2 - Crack In Your Eye. 3 - Withered Hand. 4 - Chem-Farmer. 5 - Visit Colonel. 6 - Maze Francier. 7 - Rogue Planet. 8 - Lupine Ossuary. 9 - No Spell. 10 - Savage Victory. 11 - Plastic Plant. 12 - Wax Face. 13 - Contraption/Soul Desert. 14 - Opposition. 15 - Meat Step Lively. 16 - The Lens. 17 - Holy Smoke. 18 - Hang A Picture. 19 -...
favoritefavoritefavoritefavoritefavorite ( 1 reviews )
Topic: Garage.
8
8.0
Feb 16, 2021
02/21
by
Center for Accessible Technology in Sign
movies
eye 8
favorite 0
comment 0
ASL vocabulary
Topic: garage
11
11
movies
eye 11
favorite 0
comment 0
introducing a product about garage
Topic: garage
4
4.0
Jan 5, 2021
01/21
by
Siegmund Schreiber (SamWhiskey)
data
eye 4
favorite 0
comment 0
Rope Guide for Hoermann Garage Door =================================== Description ----------- ###Concept: This is a guide for the steel rope of a Hoermann garage door (LPU 40). The original guide seems to be a bit small and having too much space behind. So sometimes when starting to close, the rope was swinging behind the guide (see picture). Then the rope could not get back to normal postion anymore and the automatic door stopped. ###You need (for each side): - screw M6 x 10 - (large...
Topics: Parts, stl, garage, Garage_Door, garage_opener, thingiverse, hoermann
9
9.0
Aug 6, 2020
08/20
by
Center for Accessible Technology in Sign
movies
eye 9
favorite 0
comment 0
ASL vocabulary
Topic: garage
3
3.0
Apr 23, 2021
04/21
by
Tony Klose (amklose)
data
eye 3
favorite 0
comment 0
We have an OLD Sears garage door opener, and the case for my remote was falling apart and the button was making poor contact. I designed this case to fit the internal board and 9V battery, as well as a new button wired to the contacts. We only used the large button so the single momentary pushbutton is soldered to the contacts for that one, though you could add additional buttons for the other two. There is a hole for the LED to come through, and I actually sanded the LED down flush with the...
Topics: garage_opener, remote, Garage_Door, Replacement Parts, garage, stl, thingiverse, garage_door_remote
509
509
Sep 4, 2013
09/13
by
Break The Bans
audio
eye 509
favorite 1
comment 0
А эти парни не дают заскучать. Вот один из их концертов записанных где-то в 2012. И как всегда атмосфера и звук гаража на высоте. А что еще можно добавить, это надо слушать, а лучше увидеть. А еще лучше там присутствовать.
Topics: garage punk, garage rock, live
4
4.0
Apr 20, 2021
04/21
by
kerry (ipeench)
data
eye 4
favorite 0
comment 0
i wanted a garage door opener i can use from my phone. i also am teaching my self programing and cad so this was perfect. i found a post on makezine.com (https://makezine.com/projects/particle-core-garage-door-opener/) “open your garage door with a smart phone and particle core” it is a few years old but it seemed like it should still work for what i wanted i also had everything needed except the particle core so it was perfect being new to this when i went to amazon i found the particle...
Topics: Household, thingiverse, stl, particle_photon, garage_opener, Garage_Door, garage_door_remote, garage
3
3.0
Sep 14, 2021
09/21
by
David Douma (davidgdouma)
data
eye 3
favorite 0
comment 0
Designed this part for holding a chamberlain garage door remote. In the garage, I can now open the door when near it, no wiring required. Print this device, program remote for doors, use #6 screws to fasten to surface of your choice, slide door opener on, use. Recommend printing with supports everywhere. This keeps the block that holds the opener strong. There is a small standoff that keeps the remote in place. Orient this towards the bottom.
Topics: stl, thingiverse, garage_door_remote, Garage_Door, garage, remote_holder, garage_opener, Automotive
8
8.0
Jan 19, 2021
01/21
by
Jorge Sotelo (bora9)
data
eye 8
favorite 0
comment 0
Needed a case for my garage door opener since every time I used to have it inside my pocket or my backpack it would unintentionally click the button. Snug fit so the garage door opener does not unintentionally come off Note: you might want to include a ring on the door opener to pull the device out or simply use a tie like on the picture.
Topics: Garage_Door, thingiverse, Household, garage_opener, garage, genie, stl
3
3.0
Apr 4, 2021
04/21
by
Joe Bixler (Bixel925)
data
eye 3
favorite 0
comment 0
This was edited from the model found in [this video.](https://youtu.be/XRc24yu4dpk) I edited this to make the lid fit with more of a pressure fit than relying on screws/inserts. This is for mounting to your garage door opener to turn it into a "smart" device and don't want to pay for a subscription. I definitely recommend taking a look if you want a detailed overview on how to make the full project or just want to see what it's all about. I have not printed this yet, but will update...
Topics: thingiverse, adafruit, garage, garage_door_remote, Adafruit_feather, Garage_Door, stl, DIY,...
8
8.0
Jan 17, 2021
01/21
by
Tim Angus (timangus)
data
eye 8
favorite 0
comment 0
My garage door fob broke and couldn't feasibly be glued back together (again) so I made a 3D printed repair.
Topics: Garage_Door, thingiverse, hormann, garage_opener, Replacement Parts, garage, stl
3
3.0
Mar 31, 2021
03/21
by
Mab Bee (SamGamgee)
data
eye 3
favorite 0
comment 0
This is a replacement plastic lever for the inside of an up-and-over garage door. The version supplied with the garage door had a thin cross section, and was prone to fracture. This version is much thicker, and much more effective as a lever. The item attaches to the diagonal cables on the inside of a garage door, when the plastic level is operated, it pulls the cables (by rotating about the central axis), the cables then retract bolts on each side of the door - allowing the door to be opened.
Topics: Garage Door Lever, thingiverse, Garage, Mechanical, DIY, Garage Door, stl
4
4.0
Mar 9, 2021
03/21
by
Paulo Fernandes (TerraNosOlhos)
data
eye 4
favorite 0
comment 0
Criei este comando porque o do meu pai quebrou ao cair ao chão. Se é de utilidade para alguém, podem descarregá-lo. A peça pequena é para imprimir em transparente, para deste modo ver como o led acende ao utilizar os pulsadores.
Topics: garage_door_remote, Garage_Door, stl, thingiverse, garage, Replacement Parts
3
3.0
Oct 15, 2021
10/21
by
Kais Khemakhem (3dmods_com)
data
eye 3
favorite 0
comment 0
I didn't feel like spending 20 bucks at Walmart for one of these so I designed one and added a feature to hold the clip.
Topics: garage_door_remote, thingiverse, Garage_Door, stl, Organization, garage, holder
1,954
2.0K
Nov 12, 2014
11/14
by
Break The Bans
audio
eye 1,954
favorite 1
comment 1
Да, вы не ошиблись — это новый альбом Break The Bans. Вроде ничего не изменилось, но изменилось все! Произошли довольно крупные реформы. Темы секса и любви сменились реакцией на острые социально-политические вопросы. А из танцевального звучания гаражных хард-рок боевиков...
favoritefavoritefavorite ( 1 reviews )
Topics: punk rock, garage rock, garage punk
Source: www.southerncitylab.net
4
4.0
Apr 4, 2021
04/21
by
Derek Harris (dereklakewood)
data
eye 4
favorite 0
comment 0
This is a slatwall mount and lock wedge designed to use M3-0.5 Threaded Heat Set Inserts so you can mount a variety of things to slatwall. You can put one, two, or three inserts in each mount. These are the inserts I use: https://www.amazon.com/gp/product/B077CL322T The wedge slides in under the top of the mount to keep it secure. I printed in CF reinforced PETG, but other materials, such as ABS should work too.
Topics: thingiverse, garage, Organization, stl, Garage_organization
3
3.0
Mar 19, 2021
03/21
by
Aleksej Vasiljkovic (achmed20)
data
eye 3
favorite 0
comment 0
These are the parts for my IoT garage door opener "GaragePack". Control your garage door via Webinterface or MQTT. You can find the parts list, firmware and more info here: https://achmed20.github.io/GaragePack/
Topics: garage, thingiverse, iot, arduino, Household, garage_opener, Garage_Door, stl
4
4.0
Nov 22, 2019
11/19
by
Waldman, Nomi
texts
eye 4
favorite 1
comment 0
16 pages : 21 cm
Topics: Garage sales -- Juvenile fiction, Garage sales
10
10.0
Jan 14, 2021
01/21
by
Ryan (ryman08)
data
eye 10
favorite 0
comment 0
Wall mountable holder for the LiftMaster myQ
Topics: garage_opener, thingiverse, stl, garage, DIY
363
363
Nov 22, 2013
11/13
by
Railkid Station
audio
eye 363
favorite 1
comment 0
Эти двое парней из Минска, продолжают традицию гараж-панк дуэтов. Кстати, они так же друзья группы The Bomb Busters. Их музыка приправлена рок-н-роллом и кое-где хард-роком. По звучанию ребята играют немного сдержанней и чище своих товарищей, что может быть для одних плюсом, а...
Topics: Garage rock, Garage punk, Indie rock
5
5.0
May 15, 2021
05/21
by
Loftus, Jennifer
texts
eye 5
favorite 0
comment 0
12 pages : 22 cm
Topics: Garage sales -- Juvenile literature, Garage sales
73
73
Jan 5, 2020
01/20
by
19:99
audio
eye 73
favorite 0
comment 0
A personal story based on all the emotional colors of rethinking the classic sound of future garage and related genres. The story of the need to lay and transfer emotions in the form of melodies. KD075, originally released on Kaiseki Digital https://kaisekidigital.bandcamp.com/album/inertia
Topics: electronic, future garage, garage, lo-fi
5
5.0
Sep 8, 2020
09/20
by
Bradman, Tony
texts
eye 5
favorite 0
comment 0
48 pages : 22 cm
Topics: Garage sales -- Juvenile fiction, Garage sales
3
3.0
Mar 25, 2021
03/21
by
Matthew Luce (Rehpa)
data
eye 3
favorite 0
comment 0
Garage door sensor kept getting blinded by the sun on sunrise and sunset. Causes the garage door not to shut. I put up with it for far too long. Built, printed, and installed this week. Resolved my issue, maybe it will help you. First time using FreeCAD. Models aren't perfect. I've included them in case you want to adjust for your needs.
Topics: stl, garage, thingiverse, Garage_Door, Household
7
7.0
Jan 21, 2021
01/21
by
Dustin Butler (oldbute)
data
eye 7
favorite 0
comment 0
Hook for garage rail system. Works well in petg, pla is ok but not as strong. The skinny hook is kinda useless, might hold a roll of duct tape.
Topics: Garage_organization, thingiverse, garage, DIY, stl
11 p. : ill., plans ; 27 cm., trade catalog
Topics: concrete, Division 03, parking garage, garage
3
3.0
Apr 8, 2021
04/21
by
Matt Wall (Mattwall)
data
eye 3
favorite 0
comment 0
So I needed to add a door control on the wall and had a spare remote control. This housing simply covers and houses the existing remote and allows for the door open/close button to be pressed via the front button. The slide on front cover allows easy access to the remote should it be required for other purposes and to change batteries etc. I simply used a thin white paint pen to fill in the text and button
Topics: 3D Printing, Garage_organization, avanti, centurion, garage_door_remote, garage, stl,...
6
6.0
Mar 17, 2021
03/21
by
Jan Dedek (Hanz_tiskar)
data
eye 6
favorite 0
comment 0
PETG test material. Puts it tight. The controler has a manufacturing defect and cracks in the lower area, this case reinforces the controler and can be used on the already destroyed controler. Put the controler in the packaging, it's tight Controller size: 28 x 70 x 14 mm
Topics: garage, garage_opener, door, stl, hormann, thingiverse, Other, Garage_Door, case
4
4.0
May 1, 2021
05/21
by
Josh Sioux (Josh303)
data
eye 4
favorite 0
comment 0
This is a case for a Chamberlain garage door remote. Which you can put on a key ring. The original ring of the case was broken. print in tpu
Topics: stl, garage_door_remote, garage, TX4RUNI, chamberlain, thingiverse, Garage_Door, Gadgets
3
3.0
Jan 4, 2021
01/21
by
Usman Suriono (uzcaliber)
data
eye 3
favorite 0
comment 0
These are parts 3D printing used for my "Attic Elevator using Garage Door" from my Instructible : https://www.instructables.com/Attic-Elevator-Using-Garage-Door-Opener/ Use rollerblade, or skateboard bearings for the roller.
Topics: Organization, attic, stl, Garage_Door, garage_opener, Garage_organization, thingiverse, Elevator
5
5.0
Apr 20, 2021
04/21
by
Blake (kalahari)
data
eye 5
favorite 0
comment 0
Cover your LiftMaster garage door opener to keep it from activating accidentally in your pocket.
Topics: Household, thingiverse, cover, stl, Key_Fob, garage_opener, Garage_Door, garage
3
3.0
Apr 8, 2021
04/21
by
Matt Wall (Mattwall)
data
eye 3
favorite 0
comment 0
Convertion from cheap universal type garage door remote to wall mounted garage door control. Simply place the remote face down inside the box and slide on the front cover. Use a thin white paint marker to fill in the text and button. Remote type can be seen in the pictures above and are available for most door types on ebay, banggood etc (make sure you get the right one for your door as they all look the same but are electronically different to suit the door manufacture)
Topics: wall, wall mount, 3D Printing, garage_door_remote, garage_opener, garage, stl, thingiverse, remote,...
10
10.0
Jan 18, 2021
01/21
by
N T (ntdesign)
data
eye 10
favorite 0
comment 0
Replacement part for the remote shown in the picture, only one button accessible. The original part had brittle rubber buttons which cannot be replaced. Electronics are simply pulled out and placed in new case. 2 M3x8 and hexnuts needed, the top and bottom shells are only cosmetic and can be omitted. Do not print from PLA, it will warp if you leave the car in the sun. PET-G works for me so far.
Topics: garage_door_remote, Garage_Door, thingiverse, garage_opener, Replacement Parts, stl
BEYOND SCIENCE FICTION COMES REALITY.... BEYOND ALL OF THAT IS AIRTIGHT GARAGE. OPEN UP! DECIDED IN 1993, THE BAND HAS DONE THREE ALBUMS, EACH MORE PROGRESSIVE THAN THE LAST. AIRTIGHT GARAGE FEATURES A TEXTURE OF LOOSELY DISTORTED GUITARS AND ACOUSTIC GRIT. FEATURING: GEOFF GEORGE (DRUMS), JASON GEORGE (VOCALS/GUITARS), JOEL MACHIELA (BASS/GUITAR) & ALLISON WALTERS (VOCALS/GUITAR)
Topic: AIRTIGHT GARAGE
49
49
Apr 12, 2016
04/16
by
Garage Noise
audio
eye 49
favorite 0
comment 0
True blue DIY Rock and Roll straight to your earholes every monday 6-7 WRLR.FM
Topic: Garage Noise
vinyl music
Topic: Garage Rock
Lyres – On Fyre Label: New Rose Records – rose 35, New Rose Records – ROSE 35 Format: Vinyl , LP, Album Country: France Released: 1984 Genre: Rock Style: Garage Rock , Rock & Roll Tracklist Hide Credits A1 Don't Give It Up Now Written-By – J. Conolly * 4:13 A2 Help You Ann Written-By – J. Conolly * 2:29 A3 I Confess Written-By – J. Kollenberg *, R. Graffia * 2:50 A4 I'm Tellin' You Girl Written-By – J. Conolly * 1:40 A5 Love Me Till The Sun Shines...
Topic: Garage Rock
Outsiders Welcome! There's no wall built here: Come one come all into the world of Apocalypstick... This month: all the sounds stirring in the studio of Lucy Lux. Have a listen and stay buttoned up. xo Playlist: 1. ‘And Then The Red Sun’ (The Story of a Cyclops) -Chrome 2. ‘Blush’ Algebra Suicide 3. ‘Bang Bang’ -Betty Chung 4. ‘Goin’ Down South’ - Burnside 5. ’N.I.T.A.’ - Young Marble Giants 6. ‘Young Jobless’ - The Cleaners From Venus 7. ‘Bugs on Glue’ - Digital...
Topic: Garage Punk
Zeke's Garage is world famous for two things: their scrumptious deviled eggs, and of course, their music. Songs with topics ranging from video games and girls to the desire to be a japanese warrior. If you're in the Manchester, NH area, check them out sometime. Download the MP3s and check out our website.
Topic: Zekes Garage
Garage
Topics: drawing, garage
VOL. 977 13 afternoon 01 LITTLE JOHN & THE SHERWOODS Long Hair 02 THE LUV'D ONES Portrait 03 KEGGS Girl 04 LOU CAPRI Love And Kisses 05 THE DECADES I'm Gonna Dance 06 LOS SEIMS Mister Acelerador 07 THE LOOSE ENDS Hey, Sweet Baby 08 THE MARKSMEN Moonshine 09 M.G. & THE ESCORTS Please Don't Ever Change 10 THE LOST SOLES Do You Remember 11 LUVIN' KYND Missy D.M. 12 LOS JOCKERS Psychotic Reaction 13 LINCOLNS Come Along And Dream 14 THE BRAVE NEW WORLD The Train Kept A Rollin' 15 KINGBEES...
Topics: Garage, Psychedelic
