3
3.0
Apr 4, 2021
04/21
by
Jan K. (jprofesorek)
data
eye 3
favorite 0
comment 0
Turns the popular 1A mouse microswitch with lever into a bistable toggle switch. This thing lets you combine: * a mouse microswitch with lever, * 3 M2x10 bolts, * the thing into a lever toggle switch.
Topics: thingiverse, toggle switch, switch, Electronics, lever switch, stl, micro switch, microswitch,...
4
4.0
Oct 26, 2021
10/21
by
ScottieD369 (ScottieD369)
data
eye 4
favorite 0
comment 0
This print is recessed for the snap in fit! then thickened back up for strength! It took awhile to get this design to work! It's a whole new concept I also put in use with the outlet! Used in Raspberry Pi IoT https://www.thingiverse.com/thing:4992092
Topics: Electronics, 120V switch, snap fit power switch, 120V switch mount, power switch, 15A switch, 120V...
9
9.0
Jan 17, 2021
01/21
by
Lawrence (lawrenceinflorida)
data
eye 9
favorite 0
comment 0
Adam Jochna posted a printed micro switch. I thought is was quite clever to utilize an inexpensive 1/4 inch tactile switch. Here's his posting: https://www.thingiverse.com/thing:756126 I designed a similar part, but it includes several enhancements. First, I didn't like having exposed terminals. So, I made side covers that have slots for wires to escape out the bottom. Second, the 2-piece body/lever was difficult to make work correctly. Too much trimming had to be done to get a nice, smooth...
Topics: Electronics, limit_switch, stl, thingiverse, printed micro switch, micro-switch, micro_switch,...
5
5.0
Mar 3, 2021
03/21
by
Dustin Diedel (Pop4solar)
data
eye 5
favorite 0
comment 0
Fits limit switch approximately 20mm x 6.5mm x 10.5mm (not including metal switch and terminals). Allows you to surface mount a limit switch to be activated by a finger for momentary on applications. It was made for use with 3mm x 12mm screws and nuts, but the switch actually only allows for smaller screws until I drilled out the holes in the switch.... eh he he. I will try to post a picture of it in use after I finish my project. Hope you find it useful. You can find my original files on...
Topics: switch mount, micro switch button, Switch, micro switch, Switch button, Electronics, thingiverse,...
14
14
Jan 10, 2021
01/21
by
Patrick Scheuble (TheBlueSkywolf)
data
eye 14
favorite 0
comment 0
The Remote cable switch is designed for creating things like a camera remote, a tac-light switch,... It uses a 6x6mm momentary switch which is soldered to a wire and secured with some hot glue. I added some Heat-Shrink Tubing for protection and a better look
Topics: pressure_switch, thingiverse, switch, Electronics, remote switch, stl, cable_switch
9
9.0
Jan 19, 2021
01/21
by
Dave McG (DavieSprocket)
data
eye 9
favorite 0
comment 0
If there are any changes that people would like me to make to these switch boxes please post in the comments or contact me directly. Update on the base, moved the outside screws closer in on the mount. Made a new base with the screw points inside the base. Added a top cover for a resistor pot, may fit an encoder as well. I needed a switch for an led light over my desk. I have a pile of these little rectangular switch's so I made a little box with mount for the switch. It took me awhile to get...
Topics: Electronics, switch_mount, light_switch, thingiverse, power_switch, stl, switch
5
5.0
Mar 3, 2021
03/21
by
Christopher Staudt (Lil_Devil)
data
eye 5
favorite 0
comment 0
This is a switch protector for EU switches, so you cant (accidentally) turn the switch off.
Topics: Light_Switch_Cover, switch_plate, switch_cover, switch_protector, thingiverse, stl, 3D Printing,...
10
10.0
Apr 21, 2021
04/21
by
Will Wright (WildWill)
data
eye 10
favorite 0
comment 0
This device is used to tie together two horizontally placed household switches. One example where this could be used would be in a bathroom where there is both a light switch, and a fan switch. You could use this as a temporary solution to force people to use the fan whenever they turned on the light, and potentially this could help to expel excess moisture from a shower.
Topics: Household, light switch tie, thingiverse, stl, bathroom fan, switch hitch, switch tie,...
6
6.0
Apr 27, 2021
04/21
by
kyle trahan (-KT-)
data
eye 6
favorite 0
comment 0
light switch blocker, prevents accidental off or on switching. Switch can still be accessed through opposite side of cover.
Topics: Household, thingiverse, garbage_disposal, switch_blocker, switch, light_switch_blocker,...
3
3.0
Apr 28, 2021
04/21
by
Krizash (Krizash)
data
eye 3
favorite 0
comment 0
Real micro limit switch (roller lever arm) in Fusion 360 for your projects
Topics: micro limit switch, thingiverse, roller switch, switch, limit switch, DIY, stl, rollerswitch, micro...
10
10.0
Jun 11, 2021
06/21
by
(NateTheApe)
data
eye 10
favorite 0
comment 0
Summary I really liked the dock shelf that boydievonboyd created to get my dock up off of the desk but it was a bit too shallow as the hinges on the back of the dock stick out; it did not fit without scaling the entire model up to about 104%. I designed this one to be a little deeper, made the cable management hole larger to allow installing the HDMI cable after mounting the shelf, and added a version with pegs to hang JoyCon straps from. If printing the version with pegs, place supports under...
Topics: nintendo, nintendo_switch_stand, switch, thingiverse, nintendo_switch_dock, nintendo_switch_shelf,...
3
3.0
Jan 4, 2021
01/21
by
Will Barton (willbert6100)
data
eye 3
favorite 0
comment 0
This is a Dimmer knob - Toggle switch - Rocker Switch Cover Plate. It is an standard oversized plate size. Please let me know if you have any questions.
Topics: dimmer_switch_plate, rocker_switch, rocker_switch_plate, dimmer_switch, rocker, Decor,...
3
3.0
Apr 4, 2021
04/21
by
Michael Verive (mverive)
data
eye 3
favorite 0
comment 0
Simple design to keep light switches in either the Off or On positions. Easy to install and remove, clean design. Prints without supports.
Topics: thingiverse, switch, switch protector, light_switch, Decor, stl
3
3.0
Jan 19, 2022
01/22
by
Petter Wallerius (Wallesurf)
data
eye 3
favorite 0
comment 0
Wasn't happy with the wall mounts uploaded, so i did a Quick design for my own purposes. This is my first contribution here... Printed with economy PLA but 3 wall lines instead of two, came out really good, a tight slim fit.
Topics: switch, Switch_wallmount, thingiverse, Video Games, nintendo_switch_stand, stl, nintendo_switch
0
0.0
Aug 12, 2022
08/22
by
Michael Schmidt (Mainiac5907)
data
eye 0
favorite 0
comment 0
I have multiple switches around the house that are inconvenient when they are switched off. Saw a couple of covers and other locks on here so I thought I would make my own.
Topics: power_switch, light, stl, light_switch, thingiverse, Household, light_switch_lock, switch
4
4.0
Apr 1, 2021
04/21
by
Mitch Murphy (MaverickMaker)
data
eye 4
favorite 0
comment 0
This is the third version of a light switch cover I've designed for toggle/decora/rocker type switches to keep my two year old from playing with them. It's low profile and can be added to existing switches by just removing the plate screws, and putting them back in with the cover placed over the switch. We keep the key on top of the trim next to the door beside the switch for easy access that our son can't reach. You don't have to use the key, you can use another thin object of your choice to...
Topics: light_switch_lock, thingiverse, lighting, switch, light_switch, Light_Switch_Cover,...
8
8.0
Jan 17, 2021
01/21
by
Riley Meyer (SILVERADORED)
data
eye 8
favorite 0
comment 0
I will be using this to consolidate my auxiliary light switches but can be used for whatever you want. There are multiple bases to accommodate different mounting situations. -On 1 and 2 the wider section is for double sided tape -On 1 the wires exit to the left (top of dashboard USA) -On 2 the wires exit to the right. (upside down below the column USA) -On 3 the wires exit out the bottom. (leaves a lot of mounting options available) -On 4 the wires exit out the back. (Mounted to the windshield...
Topics: truck, Automotive, light_switch, thingiverse, toggle_switch, car, switch, stl, auxiliary_switch
8
8.0
Jan 15, 2021
01/21
by
Ben Brochtrup (benbrochtrup)
data
eye 8
favorite 0
comment 0
This is a dual light switch face plate and mounting box. It is specifically designed for an Eagle 276W-Box (Two 3-Way Quiet Switches); however, it may work for other switches as well. The model features five small holes at the top for screws and larger holes at the bottom for a drill bit to fit through. You may need to rotate it along the y axis in your printing software to ensure that the face plate is the side that is touching the bed.
Topics: thingiverse, Electronics, Light_Switch_Plate, stl, Light_Switch_Cover, light_switch, toggle_switch,...
2
2.0
Apr 19, 2022
04/22
by
Tom Harvey (Harveyzone)
data
eye 2
favorite 0
comment 0
Stops people from switching off my wall lights that are push button dimmers controlled by Alexa! Got fed up of trying to turn on the wall lights, only to find that someone had switched them off at the switch. This simple build slips down behind the push switches, preventing them from being switched on and off by pushing the button. It can easily be slid out to over-ride if required, and I have also added a message reminding people of the name of the lights that the switch controls. :-)
Topics: switch lock, Household, thingiverse, dimmer switch, smart switch lock, alexa switch lock, stl,...
9
9.0
Apr 27, 2021
04/21
by
Susan Donovan (futurebird2)
data
eye 9
favorite 0
comment 0
A simple cover for through-hole switches. Looks nice printed in wood.
Topics: thingiverse, switch, switch_cover, stl, power_switch, Electronics
9
9.0
Jan 17, 2021
01/21
by
Johan Tullberg (Jacet)
data
eye 9
favorite 0
comment 0
Simple holder for a switch that I use for my bedlight. I have attached the Inventor part file (ipt) if you need to change anything before you print.
Topics: Electronics, switch_mount, thingiverse, power_switch, stl, switch
4
4.0
Jan 4, 2021
01/21
by
Von Plaf (freetech)
data
eye 4
favorite 0
comment 0
Nintendo Switch grip. Designed in one half so that you can print multiple in different colors and stick them together with super glue.
Topics: nintendo_switch_grip, switch_grip, stl, Video Games, switch_controller, nintendo_switch_stand,...
Switch - Let's Rock About It by Dikk To talk about Switch it's best to say that it's a rock band, apart from usual designations one usually puts after or before this expression ( which I don't usually use because I think they're mostly subjective ), it all resumes to that popular way of making simple and direct songs, the rebel attitude of saying what needs to be said, the higher, the better; for me this is the common characteristic between the different genres, it's some people who keep...
Topic: Switch
10
10.0
Dec 2, 2020
12/20
by
Center for Accessible Technology in Sign
movies
eye 10
favorite 0
comment 0
ASL vocabulary
Topic: switch
28
28
Dec 28, 2020
12/20
by
Spread the Sign
movies
eye 28
favorite 0
comment 0
ASL vocabulary
Topic: switch
3
3.0
Jan 4, 2021
01/21
by
John Luciano (Luucky13)
data
eye 3
favorite 0
comment 0
I designed this so i can add a toggle switch to my Anet8. printed in the position shown no support needed, i printed it in PLA but ABS worked good too, Use the miniature toggle switch on EBay . I added a hole on either side for zip ties to use as strain relief for the wires
Topics: Switch bracket, stl, Switch mount,, 3D Printers, fan, toggle_switch, Anet_A8, power switch, Anet 8,...
8
8.0
Jun 20, 2021
06/21
by
Andrew Mills (S13_Mills)
data
eye 8
favorite 0
comment 0
Light switch guard for 2 out of 3 switches on a common type of UK switch faceplate. There are holes so you can still actuate the 'locked' switches with a pen/skewer/etc, but can't accidentally switch them. Held in place by the same screw that holds the faceplate on, no additional parts. I use mine to prevent anyone accidentally switching off the security lights on my garage! Can be printed without supports, so it comes off clean, and you only have to trim off the brim!
Topics: thingiverse, Office, light_switch_lock, stl, switch, light_switch, light_switch_guard
2
2.0
Mar 26, 2021
03/21
by
Sinopoli Ludovic (Sharky_Creations)
data
eye 2
favorite 0
comment 0
Ce dock reprend la forme du dock d'origine de la Switch "classique" mais adapté aux dimensions de la Switch Lite. Un emplacement est réservé dans la base du dock pour insérer le câble de recharge d'origine livré avec la Switch Lite.
Topics: stl, thingiverse, dock_switch_lite, charging_dock_switch, switch_lite, Video Games,...
The OCR that Google Patents originates has been edited to make this patent full-text-searchable and easy to read. There are 3 formats available: .pdf (original), .txt (clean text), and .brf (braille file). .brf is a file format used by the blind. See the "all files HTTP" link to access all three. During the editing process, a diligent attempt has been made to correctly discern every reference character set forth in the patent, and the majority by far are correct. However, because the...
Topics: tramway switch, tramway, switch, patent
0
0.0
Aug 13, 2022
08/22
by
Sascha Ganse (saschagns)
data
eye 0
favorite 0
comment 0
This is a mount for a 21 mm diameter round rocker switch. It can be mounted on a plate or somewhere else after you placed your switch at the mount. The hole for the switch is 21mm diameter. The hole to install the whole mount on a plate is 4.4mm diameter. The wired or soldered cables can be routed to the rear. In the picture you can see the printed part mounted on a wooden plate with the help of two screws.
Topics: electric switch, Rocker Switch, Rocker, mount, rocker switch holder, 21 mm switch, Rockerswitch,...
6
6.0
Jan 3, 2021
01/21
by
James Sutherland (jsutherl)
data
eye 6
favorite 0
comment 0
This is a simple box for mounting a mini switch box. This is the switch I used: http://www.jhswitch.com/html_products/JH-SWITCH-KCD1-110-22.html Amazon link to buy switch: http://a.co/d/2DFPth8 Tinkercad links in case you need to edit: https://www.tinkercad.com/things/bvjGSGk7iHr-mini-switch-box-lid https://www.tinkercad.com/things/hsIdGT0UG5P-mini-rocker-switch-box
Topics: stl, switch, Rocker_Switch_Mount, rocker_switch, thingiverse, Electronics
10
10.0
Jan 19, 2021
01/21
by
Jost Salathé (jostsalathe)
data
eye 10
favorite 0
comment 0
Did you ever accidentally hit the switch of the power strip that is supplying your PC? I certainly did since I mounted that power strip underneath the desk for clean cable management. Unfortunately my knee always gets dangerously close to that switch - and sometimes too close. As solution I designed this snap on cap that makes it much more difficult to accidentally hit that switch with something as big as a knee... The cap fits a Kopp UNOversal power strip switch.
Topics: thingiverse, switch_guard, Office, power_switch, switch_cap, stl
8
8.0
Jan 17, 2021
01/21
by
Brandon Blinkenberg (8ran)
data
eye 8
favorite 0
comment 0
Made this for a rocker switch to turn on/off a short strand of LED strip lights. I mounted it underneath a cabinet, but would fit in any 90 degree corner. Total height without switch installed is 31 mm. If you're looking for a flat mount switch box, use this one: https://www.thingiverse.com/thing:2707081 This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/3qClsha7oKs
Topics: rocker_switch, Electronics, thingiverse, 21mm, power_switch, stl, switch
4
4.0
Mar 10, 2021
03/21
by
Marco Meijer (Amanoo)
data
eye 4
favorite 0
comment 0
A mount that can be used for attaching the Nintendo Switch to a camera stand with a 1/4" screw thread, which is the type of thread used by modern cameras. It uses the Switch's locking mechanism to secure it in place, and ensure that the Switch cannot fall out. The Switch stick a little forward to make sure it can be inserted or removed easily and make sure the USB port is kept free. Add a spring to make the locking mechanism work. A cheap ballpoint pen's spring that's cut in half will...
Topics: nintendo, switch, nintendo switch stand, stand, nintendo switch mount, switch_mount, stl,...
3
3.0
Jan 8, 2021
01/21
by
michael pallo (kiddthegamer)
data
eye 3
favorite 0
comment 0
I couldn't find one anywhere else so I decided to model my own after my the hinges on the back plate of my dock snapped from wear and tear from bring it with me during my travels
Topics: backplate, stl, switch_dock, Video Games, switch, nintendo_switch, thingiverse, nintendo_switch_dock
13
13
Jan 11, 2021
01/21
by
Cody Wade (thecodedgamer)
data
eye 13
favorite 0
comment 0
This is a Nintendo Switch carrying case which touches the Switch only on the rails! I put a Hylian Sheild design on the front for added protection! Added a Nintendo Switch logo version. Added a black version in case anyone want to make their own versions. I have updated the case to now have a slide over top with a hole for the power to plug through! I also updated per many reddit suggestions, made a version with a convex shield. I am planning on taking my switch on long road trips and wanted...
Topics: switch_case, thingiverse, switch, Electronics, nintendo_switch_case, stl, nintendo_switch,...
3
3.0
Apr 24, 2021
04/21
by
Kelvin Po (iceflow604)
data
eye 3
favorite 0
comment 0
Holder for a rocker switch (13x19mm rocker) with two holes for 6 mm magnets. It has two holes on the side for two terminals that should accommodate 18 AWG wire. The switch is a simple press-fit but the magnet holes are designed so you glue them in. I might try making them smaller later for a press fit later. This was made to house the light switch for LED strip lights in a metal cabinet (hence the magnets for mounting)
Topics: Rocker_Switch_Mount, light_switch, stl, thingiverse, rocker_switch, Electronics, switch,...
2
2.0
Apr 19, 2022
04/22
by
Ted Lin (kitlaan)
data
eye 2
favorite 0
comment 0
Do you want a way to make sure light switches are in the "off" position? Do you want your room to look like a missile command room? Do you want to accidentally avoid turning on a switch? If any of these are true (or even if they aren't), you can also print a cover for your standard US wall light toggle switch! (Couldn't get the other models I found to work smoothly, so designed my own from scratch.)
Topics: Parts, thingiverse, Light_Switch_Cover, switch_guard, switch_cover, light_switch_guard, stl
9
9.0
Jan 17, 2021
01/21
by
Brandon Blinkenberg (8ran)
data
eye 9
favorite 0
comment 0
Made this for a rocker switch to turn on/off a short strand of LED strip lights. Mounts to any flat surface. Total height without switch installed is 31mm. If you're looking for a corner-mount switch box, use this one: https://www.thingiverse.com/thing:2629190 This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/6eDWVy8u2Rf
Topics: 21 mm, Electronics, thingiverse, 21_mm_switch, power_switch, rocker switch, stl, switch
12
12
Dec 2, 2020
12/20
by
Center for Accessible Technology in Sign
movies
eye 12
favorite 0
comment 0
ASL vocabulary
Topic: switch
2
2.0
Nov 8, 2021
11/21
by
Bryan King (IB-King)
data
eye 2
favorite 0
comment 0
Print with TPU! Be careful when installing !! Print standing top down. Tall 19mm Med 10mm short 8mm
Topics: stl, switch condom, switch, TBS, nintendo_switch, frsky, Tx switch, rc switch, thingiverse, tpu...
15
15
Jan 10, 2021
01/21
by
Nathan Chowning (yesimnathan)
data
eye 15
favorite 0
comment 0
This dock will not allow you to use the screen on your switch while in docked mode. It's just a redesign of the face plate to help avoid scratching the Switch screen when docking/undocking. I had some issues with the original version. I couldn't get the LED diffuser into the slot, the screw terminals kept breaking off, the slots for this to attach to the dock were a little bit too tight, and the right side screw terminals seemed to be in the wrong place. The changes I made for this remix: -...
Topics: thingiverse, switch, stl, nintendo_switch, nintendo_switch_dock, nintendo, switch_dock, Video...
9
9.0
web
eye 9
favorite 0
comment 0
Switch-Discussions dumped with WikiTeam tools.
Topics: wiki, wikiteam, wikispaces, Switch-Discussions, switch-discussions,...
8
8.0
web
eye 8
favorite 0
comment 0
Switch-space dumped with WikiTeam tools.
Topics: wiki, wikiteam, wikispaces, Switch-space, switch-space, switch-space.wikispaces.com
12
12
Apr 16, 2021
04/21
by
Jay Pozo (jaymatter)
data
eye 12
favorite 0
comment 0
Works with this switch. Includes snap in back. I used it for an LED strip. https://www.adafruit.com/products/558
Topics: switch, light_switch, thingiverse, stl, power_switch, adafruit, Electronics
3
3.0
Apr 28, 2021
04/21
by
Don Parpan (DonParpan)
data
eye 3
favorite 0
comment 0
For the cheap 6mm Switches Quick instruction ============= Print the Plate you need, make your own length if needed. Print the Bending Jig Bend something fitting into shape. Works for 2.85mm filament or anything similar sized like 6mm² and 10AWG wire Put together/possibly drill out holes to fit, glue, done There's no limit to the amount of Switches you can put into a row. You will just have to put them together, all files needed are supplied. I used MIcrosoft's 3D builder Due to the nature of...
Topics: apollo, flip_switch, thingiverse, switch_guard, stl, Electronics, Switch
4
4.0
Mar 13, 2021
03/21
by
Simon Vitting Rasmussen (Vitting)
data
eye 4
favorite 0
comment 0
Nintendo switch dock angled stand Made this angled stand for the nintendo switch dock. This enables the dock to fit on a shelve while allowing me to remove the switch from the dock The stand does not limit airflow to the switch.
Topics: Video Games, thingiverse, switch dock stand, switch dock, nintendo switch dock, nintendo switch,...
Super Famicom (1990)(Nintendo)(JP)[rev 3]
Topic: switch
10
10.0
Mar 16, 2021
03/21
by
Brian Holt (darkhawk71)
data
eye 10
favorite 0
comment 0
Nintendo Switch Light-Switch cover. I sliced in CURA, and added a pause at height script to do the color change. I used layer 31 for my color change. For supports I did the Normal style with a support line distance of 7mm.
Topics: nintendo_switch, thingiverse, switch, light_switch, stl, Household, nintendo
6
6.0
Mar 17, 2021
03/21
by
Ross O'Ottawa (ottaross)
data
eye 6
favorite 0
comment 0
Forget the dangling switch-on-a-wire thing, let's put that switch in a solid, mounted housing. This two-piece design lets you put a big beefy power switch into a more safe and eye-pleasing configuration. This is especially a good idea if you're switching AC voltages, or higher currents. The switches that fit in here are your average, large SPST or SPDT or DPDT sort of slide switches with a longer actuator. You'll need at least a 9mm actuator to comfortably use this. 12mm is even better. (Let me...
Topics: switch_housing, power_switch, switch, housing, stl, thingiverse, Electronics
