8
8.0
Jan 17, 2021
01/21
by
(2beers)
data
eye 8
favorite 0
comment 0
Hallo! Es handelt sich um ein Gehäuse für einen nanoCUL (CUL1101) der 433MHz Greäte über FHEM zu schalten. Auf YouTube gibt es ein super Video von haus-automatisierung.com wie der nanoCUL zu bauen ist. Ich habe etwas andere Bauteile verwendet, aber der nanoCUL funktioniert sehr gut. Teile: Cc1101 Modul: http://www.dx.com/p/diy-cc1101-433mhz-wireless-transceiver-module-for-arduino-green-2-pcs-149251#.WiF_3EriaUk Arduino-nano:...
Topics: Gehä, use, case, automatisierung, nanoCUL, arduino, Electronics, automation, cc1101, nano,...
7
7.0
Jun 11, 2021
06/21
by
(Ardesi_Marco)
data
eye 7
favorite 0
comment 0
Summary Camozzi Group Logo This logo was spontaneously designed for Camozzi Group located in Brescia. With this file, the Company can have its logo for free. Whoever is interested in printing it, can simply download it. Created by Laura Bracchi, a Technical Design and 3D Printing student.
Topics: brescia, camozzi_automation, logo, camozzi, gadget, fabula3D, industrial_automation, thingiverse,...
6
6.0
Jan 21, 2021
01/21
by
(Bombus_Engineering)
data
eye 6
favorite 0
comment 0
A holder for the Garden 1189 Electronic Rain Sensor to mount it on a wall or a fence. I printed it in ABS because of the better heat and weather resistance. On the top there are 2 holes in the thread to be cut. I took M3 stainless steel screws. https://www.amazon.com/Gardena-Electronic-Sensor-Water-Computers/dp/B002VED4QK/ref=sr_1_2?ie=UTF8&qid=1537166530&sr=8-2&keywords=gardena+sensor...
Topics: home_automation, thingiverse, Household, home_improvement, shelf, home, brace, stl, bracket
6
6.0
Jan 7, 2021
01/21
by
(Coedy)
data
eye 6
favorite 0
comment 0
My remix of TTGO T-Camera by Petrepa. I am still waiting on my electronics before trying this out. but being a newbie at Tinkercad I thought I would try making a rounder version that may offer a little more protection from the rain. *WARNING-* I have not tried printing this yet, I am still waiting on the remainder of my electronics. I separated off the facia plate so that it is easier to print. I imagine this could designed much better than what I have though. I plan on printing all of the flat...
Topics: stl, home_automation, doorbell, esp32, esphome, thingiverse, Electronics, camera
4
4.0
Jun 21, 2021
06/21
by
(Ispep)
data
eye 4
favorite 0
comment 0
This temperature sensor is my favourite Zigbee sensor, lots of work has been done to make this mount design perfect. Transparent PLA makes the best result when the sensor is mounted on the wall. Want to know more about this temperature, humidity and pressure sensor? read about it on our blog: https://www.automatiserar.se/test-av-xiaomi-aqara-temperatursensor/ Want to by this sensor mount and support the smart home blog www.automatiserar.se? (Sweden only): https://www.automatiserar.se/butik/ If...
Topics: Xiaomi_Aqara, thingiverse, xiaomi_Smart_home, aqara, stl, temperature, Electronics, smart_home,...
4
4.0
Jun 6, 2021
06/21
by
(Ispep)
data
eye 4
favorite 0
comment 0
This is a mount that allow you to mount Sensative Guard without using the tape included. This will allow you to move your sensor later if you find a better place to mount it. This mount are designed to still allow this sensor to be mounted between the door and the door frame. This part is provided by the Swedish smart home blog https://www.automatiserar.se/ More about this sensor is found on the manufacturer’s homepage: https://sensative.com/strips/ Our designs are sold in Sweden from this...
Topics: Swedish design, hemautomation, home automation, thingiverse, stl, sensor mount, strips, Z-wave,...
6
6.0
Jun 21, 2021
06/21
by
(Ispep)
data
eye 6
favorite 0
comment 0
Flic is an smart Bluetooth button that enables you to control other systems like Homey, Telldus, Trådfri and lots of more systems. This approach is suited for use with the Flic hub, otherwise the doorbell will only work when your phone is home. Read more about Flic here: https://www.automatiserar.se/smartare-hem-med-flic This part is crafted with no space between bottom and top, you need to compensation when printed to your printers added size. Our designs are sold in Sweden from this page:...
Topics: thingiverse, electronics, Electronics, stl, flic, doorbell, flichub, home_automation, Flicker,...
5
5.0
Jun 21, 2021
06/21
by
(Ispep)
data
eye 5
favorite 0
comment 0
This is an holder for Xiaomi Aqara motion sensor, it´is provided by https://www.Automatiserad.se. It´s a Swedish blog about home automation. More info about xiaomi aqara motion sensor here: https://www.automatiserar.se/xiaomi-aqara-motion-sensor/ If you would like to by this mount it`s possible in sweden with this link: https://www.automatiserar.se/tillbehor-till-smarta-hem/ Our designs are sold in Sweden from this page: https://www.automatiserar.se/butik/ // Markus
Topics: thingiverse, Electronics, stl, SmartHome, Motionsensor, home_automation, Xiaomi_Aqara, xiaomi
6
6.0
Jun 12, 2021
06/21
by
(Kselleslaghs)
data
eye 6
favorite 0
comment 0
Summary Hello Guys, Something else today... I have launched a Kickstarter project! Please check it out and share if you like it! more info on my personal Kickstarter page in the link. https://www.kickstarter.com/projects/kenzoselleslaghs/rgb-touchpanel-for-micro-controller-s You can reach me out on Kickstarter or here if you have any questions! Many thanks in advance!
Topics: 3d_printer, case, home, mirror, ws2812, new, relais, engineeringproject, pcb, sketch, Quadcopter,...
5
5.0
Apr 13, 2021
04/21
by
(Linax)
data
eye 5
favorite 0
comment 0
A marble machine with climbing marbles and changeable tracks. No hardware other than the ball is needed unless you install the optional motor. Currently only two tracks but more to follow. Youtube: https://www.youtube.com/watch?v=ca_6G2sM-TY Youtube: https://www.youtube.com/watch?v=-xvpLN2a9e8
Topics: marbles, mechanical, lift, gravit, 3D, stairs, wheels, marble_machine, thingiverse, Mechanical...
2
2.0
Mar 10, 2021
03/21
by
(PhantomWolf)
data
eye 2
favorite 0
comment 0
This is a Barn Door style frame for a Galaxy Tab A 10.1. Designed the model in SketchUp and printed the hardware/supports. Printed with ABS, sanded the visible hardware and made a glossy finish with acetone. The wheels are printed in halves and glued together. Used #12 2 1/2" wood screws to mount (Top holes #2 and 4) Print: 2 Axle 1 FrameCornerSupports 4 FramePeg 2 Hanger 1 Rail (if too big print to RailSplit) 3 RailPeg 2 ScrewBushing 4 Wheel (halves)
Topics: smart_home, tablet, stl, thingiverse, wall_mount, Samsung_Galaxy, barndoor, barndoor_mount, Tablet,...
6
6.0
Mar 3, 2021
03/21
by
(Plain_space)
data
eye 6
favorite 0
comment 0
I made this to cover light switches for lights that are being controlled by a home automation system. It functions to stop people from flipping the switch off which disconnects the light from the system. It also removes the visual noise of the switch from view.
Topics: Light_Switch_Cover, Philips_Hue, Household, home_automation, thingiverse, light_switch_guard, stl,...
7
7.0
Apr 19, 2021
04/21
by
(Pyroplex)
data
eye 7
favorite 0
comment 0
***Please note that this project is created for educational purposes. The project may not be optimal in some ways, and may even be dangerous to use. Please be cautious.*** ---------- This is a 3D scanner that can be built and assembled only with 3D-printed parts, apart from the electronics (full list of components below). The scanner is driven by two stepper-motors and a range-sensor, controlled by a Raspberry PI. All parts have been designed to fit inside a build-volume of 140x140x140mm. #...
Topics: thingiverse, stl, automation, Robotics, Raspberry_Pi, stepper_motor, gears, 3D_scanner,...
4
4.0
Jun 11, 2021
06/21
by
(Schmelzerboy)
data
eye 4
favorite 0
comment 0
Summary HB-UNI-Sen-WEA https://github.com/jp112sdl/HB-UNI-Sen-WEA/wiki Standrohr ist für 12 mm konstruiert Lager sind Rillenkugellager / Miniatur Kugellager 625 ZZ = 2Z 5x16x5 mm Regenmodul ist von Stall.biz
Topics: home_automation, Homematic, wetterstation, thingiverse, AskSinPP, stl
7
7.0
Mar 18, 2021
03/21
by
(TechnoSwiss)
data
eye 7
favorite 0
comment 0
A re-mix of mugbean's Pi Zero W Case to add a mounting point, and extra height to support the addition of Pimoroni's automation phat. I used this case to mound the combined Pi Zero and pHat to my garage door opening. The pHat provides a relay for operating the garage door opener. The bolt I used for mounting the case also provides a great place to mount the antenna for my RTL-SDR which gets used for listening to various sensors in the garage and house. Print off 4 of the spacers, they should...
Topics: Household, pHat, raspberry_pi_case, Raspberry_Pi, automation, stl, thingiverse
11
11
Jun 12, 2021
06/21
by
(agumluna)
data
eye 11
favorite 0
comment 0
Summary Estuve recopilando información sobre brazos roboticos y me decidí a hacer uno propio. Saqué la pinza de @yisparyan que me gustó mucho y le hice unas modificaciones. Y tambien hice una interfaz personalizada a mi gusto con C# donde controlo con arduino UNO mi brazo y le indico las coordenadas para hacerlo automático. Video del funcionamiento: https://www.youtube.com/watch?v=oTFskPslj6M Todavía estoy con este trabajo en progreso. Espero que les guste. Saludos!
Topics: servo, arduino, 9g_servo, thingiverse, automation, electronics, micro_servo, robotics, robo3d,...
0
0.0
Aug 16, 2022
08/22
by
(anverx)
data
eye 0
favorite 0
comment 0
These are hoods for motion sensors to constrain what the sensor sees. Primary intended usage is for feet sensing on staircases, i'm sure there are plenty of other applications. These work with Sonoff and unbranded aliexpress sensors attaching just with friction, for Ikea senors use a bit of two sided tape.
Topics: stl, motion_sensor, thingiverse, home_automation, Homeassistant, Organization
4
4.0
May 1, 2021
05/21
by
(cbell)
data
eye 4
favorite 0
comment 0
Ultra low profile wall mount for the 9th gen Amazon Fire 7" tablet: * requires removal of the rear plastic cover of the tablet. The tablet then clips into the wall mount. * wall mount is designed to attach a 1-gang wall box (both new and old work) * power is provided by a 110VAC/5VDC 2A power supply module https://www.amazon.com/dp/B07SGQ6XXR/ref=cm_sw_em_r_mt_dp_MDMS95VX4DJKWZCDGZAY?_encoding=UTF8&psc=1 that is attached to the PSU Carrier and covered by the PSU enclosure. The Carrier...
Topics: stl, thingiverse, DIY, home_assistant, home_automation
5
5.0
May 1, 2021
05/21
by
(cbell)
data
eye 5
favorite 0
comment 0
2 Gang Switch Plate with 2.8" IPS TFT Display and Raspberry Pi Zero W as interface panel for home automation. The design was inspired by the screwless Lutron Claro Switch plates. See forum post for assembly details. https://community.home-assistant.io/t/new-spin-on-ha-switch-plate-interface/293408/11?u=cbb09 Parts: - Carrier: this is the base plate that gets attached to a 2-Gang wall box - Fascia: Clips into Carrier - RPi Zero W Enclosure: attaches to the back of the Carrier and provides...
Topics: stl, diy_home_automation, DIY, home_assistant, thingiverse
3
3.0
Jan 8, 2021
01/21
by
(dhavenith)
data
eye 3
favorite 0
comment 0
This mini engine order telegraph is intended to set a home automation system in a specific "mode". The device has 5 positions; the actual position will be sent through mqtt, where it can be picked up by home automation systems. The positions on the dial are populated with 6x6 3.1mm-13mm SPST switches (these can be bought in batches of 100 pieces from your favourite online sellers). The switches are monitored by a Wemos d1 mini, which updates an mqtt topic when the lever position...
Topics: springy, stl, home_automation, mqtt, switch, steampunk, steam_punk, thingiverse, antique,...
8
8.0
Jan 17, 2021
01/21
by
(dlipper)
data
eye 8
favorite 0
comment 0
This is an enclosure for the Sonoff 10A Wifi controlled switch. This Sonoff module is very popular because of its attractive price. But it only allows to splice it into 2-wire cables that don't have ground. If you want to control an outlet that does need a ground wire then that wire has to be outside of the Sonoff module which makes the entire solution less esthetical and most likely also unsafe. This enclosure fits the Sonoff module together with all the wiring and adds additional cable strain...
Topics: case, Electronics, sonoff, home_automation, thingiverse, stl
6
6.0
Apr 5, 2021
04/21
by
(gpechli)
data
eye 6
favorite 0
comment 0
This is a valve block with integrated passively controlled valves that can be printed in one piece. The valves have a clearence of 0.1mm from the block which means that there will be slight leakage but this is necessary in order to allow printing on various 3D printers. There is one system INLET and 8 OUTLETS. The passages and valves are designed in such a way that the fluid entering the inlet exits from each outlet in consequitive pulses (starting from Outlet no. 8 to outlet No.1). The...
Topics: thingiverse, oil_distributor, automatic_valve, irrigation, Parts, stl, lubrication, valve,...
0
0.0
Aug 13, 2022
08/22
by
(hastime)
data
eye 0
favorite 0
comment 0
Adapter for Zigbee battery scene switches. These are sold under many different brands: - Tuya - Zemismart - Moes - Yagusmart - Lilon And many more. I purchased a couple of these and connected them up to Deconz to control smart bulbs as it was quite common for guests to accidentally turn off the light switch rendering the smart bulb useless. Since completing this design I now have 6 of them. I wanted to try and leave the. original switch accessible incase I needed to repair/change a bulb. So I...
Topics: aqara_switch, TS0042, deconz, Smart_Scene_Switch, moes, zigbee_switch, home_automation,...
4
4.0
Jun 10, 2021
06/21
by
(jdmmaster)
data
eye 4
favorite 0
comment 0
Case for common 8 channel relais module often used with microcontrollers such as Arduino or SoCs like the Raspberry Pi.
Topics: home_automation, Electronics, case, arduino, thingiverse, Raspberry_Pi, relais, 8_channel_relay,...
3
3.0
Mar 24, 2021
03/21
by
(jet_)
data
eye 3
favorite 0
comment 0
For more information: https://github.com/jeromelebel/bathroomfan
Topics: stl, bathroom, home, thingiverse, Bathroom, domotic, home_automation
5
5.0
Jun 11, 2021
06/21
by
(jsjone19)
data
eye 5
favorite 0
comment 0
Summary to see the current design, CHECK IT OUT: https://myhub.autodesk360.com/ue28caee1/shares/public/SH56a43QTfd62c1cd9687c293893ac4208eb In the link above, a model of the formlabs form 2 is included for comparison. This is very early in the design and I just started the robot base today. That being said, I won't post stl's (except the static one above, which is just for show) quite yet as they would change too rapidly day by day. The stl's that are finished (as of now) are included in the...
Topics: 3d_printer, Robtics, NEMA_17, Form2, nema17, repurpose, nema23, rail, linear_rail, Worm, Arduino,...
5
5.0
Apr 4, 2021
04/21
by
(mitchese)
data
eye 5
favorite 0
comment 0
Part designed for home automation system. Clips onto a servo arm and has a slot for a key.
Topics: thingiverse, DIY, home_automation, stl
11
11
Jan 19, 2021
01/21
by
(peke)
data
eye 11
favorite 0
comment 0
Adapter used on ACOME manifold to fit with CALEFFI / ROTEX actuators. Just screw it to the head. https://daks2k3a4ib2z.cloudfront.net/5688eba7233e3b583381153e/585aaa54b580e44d744a057f_reglage-nourice.png adapt vanne final 2 amincie.STL is a variation with a thicker wall for the locations where space is missing between brackets and manifold. Adaptateur prévu pour être monté sur collecteur ACOME et qui permet le montage des servomoteur CALEFFI / ROTEX. A visser ....
Topics: chauffage, heating floor, home_automation, thingiverse, domoticz, plancher chauffant, DIY,...
10
10.0
Jan 19, 2021
01/21
by
(peke)
data
eye 10
favorite 0
comment 0
My personnal case for domoticz. In it : Raspberry Pi Pi drive RFX.com Aeon stick z wave a 40mm fan must be fitted on the top cover DO NOT FORGET TO ADD PADS under the case to insure an optimal cooling. SLDPRT files added for an easy modification. [EDIT] Thanks Florfila https://www.thingiverse.com/florfilla19 for your kind feedback! - Raspberry holes location modified according to tech drawing found here : https://www.quora.com/What-are-the-exact-dimensions-of-the-Raspberry-Pi-2-Model-B -...
Topics: pi drive, home_automation, thingiverse, Raspberry_Pi, domoticz, DIY, stl
2
2.0
Jan 18, 2022
01/22
by
(schranzistor)
data
eye 2
favorite 0
comment 0
RFID Schlüssel Halter. Für Heimautomatisierung. Ich habe einen ESP8266 mit einem RFID leseboard verbunden, und benutze es für die Haussteuerung. Auf dem ESP läuft die Software espeasy und die Daten werden über MQTT zu ioBroker geschickt. Auf den ESP läuft auch noch ein Skript, das die Daten nur bei Änderung geschickt werden. Spannungsversorgung über USB am ESP. Das Kabel kann von 3 Seiten ins Gehäuse geführt werden. Mit dem beiliegenden Winkel kann das Sytem an einem IKEA Kasten...
Topics: mqtt, espeasy, ESP8266, home_automation, rfid, thingiverse, key, Hobby, IOBroker, stl, PN532, ikea,...
3
3.0
May 21, 2021
05/21
by
(sholland91)
data
eye 3
favorite 0
comment 0
[Follow this guide to modify a Wyze Sense into a Push Button:](https://docs.google.com/document/d/1jBKh7_MHzmHULb4P6AC62F0V4x8VrNKLp7EKk8OKcl8/edit?usp=sharing) I desoldered the reed switch from a Wyze Sense and soldered in a Cherry MX switch to create a pushbutton to control my Wyze bulbs. By adding custom routines you can turn on and off lights, change brightness, or trigger cameras to record. [Video...
Topics: cherry_MX, wyze_sense, thingiverse, wyzecam, diy, DIY, stl, home_automation
5
5.0
Jan 5, 2021
01/21
by
(stjohnny22)
data
eye 5
favorite 0
comment 0
Another Raspberry Pi 4 Case to add to the never ending collection here. Other cases on here were nice but I just wanted a little different look to mine. The "insert" file can be printed in a different color (I used "home assistant blue") I ended up reprinting mine with the bed side facing up for a cleaner look. The heatsink opening has a thinner area around it so if your heatsink is slightly bigger it shouldnt take much to trim it to fit nicely with a sharp blade (like an...
Topics: Pi4, Heatsink, RPi4_Case, RPi, raspberry, HomeAssistant, Electronics, home_automation, smarthome,...
8
8.0
Jan 19, 2021
01/21
by
(talsit)
data
eye 8
favorite 0
comment 0
This is a basic DIN Rail Clip. Drill holes as needed. Included is the SolidWorks 2014 model for you to modify if needed, as well as the ParaSolid. From this basic model you can mod it to include larger base, mount holes already included, etc.
Topics: automation, thingiverse, din_rail, Robotics, stl
4
4.0
Mar 21, 2021
03/21
by
-Jp- (Enginerd)
data
eye 4
favorite 0
comment 0
*UPDATE!* See the video of it in action here: https://vimeo.com/138416482 This is a treat feeder I designed to feed my dog a Dentastix treat after every meal. After designing and building it, I realized I made this thing waaaaay more complicated and $expensive$ than it needed to be! So yes there're simpler ways (I intend to make REV2 later on which will be fully printable) but I stuck with my initial idea till the end just to finish it. Disclamier: This project is NOT FOR BEGINNERS as it is...
Topics: Pets, stl, automation, dog, DesignProject, machine, MakerEdChallenge, Robot, dispenser, Dentastix,...
66
66
Aug 7, 2021
08/21
by
@Impact
texts
eye 66
favorite 0
comment 0
The world is moving faster towards automation. Home automation isn’t more an idea rather it's grown to be a necessity. Just imagine, to regulate everything around your home with one click of your phone is nothing but fascinating. This paper has presented an approach for smart home automation using Arduino with Bluetooth module. The aim was to develop and design a Home automation using Arduino with Bluetooth module with Android application.
Topics: Arduino, Home Automation, Bluetooth, Smart Phone, Security
Currently, energy saving requires the development of simple and efficient street lighting control systems. In order to create such a control system, it is necessary to develop an original principle of its operation. They considered the advantages of electronic starting devices in street lighting control systems. They performed the analysis of the existing state of street lighting means, their shortcomings and solutions have been determined, and they developed the method of lighting device...
Topics: Automation, Economy, Electronic pra, Energy saving, Lighting, Sodium lamps
752
752
Jun 3, 2021
06/21
by
A. Barzam
texts
eye 752
favorite 3
comment 0
This is the third Russian edition of “Automation in Electrical Power Systems" which covers design and operation of automatic control devices intended to prevent and clear faults in electrical power systems and restore power to the loads in the event of breakdown thus assuring continuity of the supply. The reliable and unfailing operation of such devices has been ensured through the research and development effort put into automatic power control systems. The book discusses automatic...
Topics: engineering, electrical, power control systems, voltage regulation, excitation systems, frequency...
Home automation system is one of the intelligent systems meant to create new opportunities for industry and business, as well as new experiences for users and consumers. This project is about designing, developing and testing a web-based intelligent home automation system called i-Home. Problems arises from the manually flick switches to control lighting and difficulty in monitoring houses, these activities can be automated. The main users will be residents in any residential area i.e. gated...
Topics: Home automation, Intelligent system, Internet of thing (IoT), Prototype, Web-based home system
4
4.0
Mar 30, 2021
03/21
by
AAL-Kongress (8th : 2015 : Frankfurt am Main, Germany)
texts
eye 4
favorite 0
comment 0
1 online resource (x, 146 pages) :
Topics: Assistive computer technology -- Congresses, Ambient intelligence -- Congresses, Self-help devices...
5
5.0
Jun 25, 2020
06/20
by
ACM Conference on Digital Libraries (3rd : 1998 : Pittsburgh, Pa.)
texts
eye 5
favorite 0
comment 0
ix, 319 pages : 28 cm
Topics: Digital libraries -- Congresses, Information storage and retrieval systems -- Congresses, Libraries...
10
10.0
Dec 29, 2018
12/18
by
ACM Conference on Management Issues in Automated Cataloging (1977 : Chicago, Ill.)
texts
eye 10
favorite 0
comment 0
xvi, 200 pages : 24 cm
Topics: Machine-readable bibliographic data -- Congresses, Library catalogs -- Congresses, Libraries --...
200
200
Sep 8, 2018
09/18
by
AI Now Institute
texts
eye 200
favorite 1
comment 0
Many of the assumptions about human life made by machine learning systems are narrow, normative and laden with error. Yet they are inscribing and building those assumptions into a new world, and will increasingly play a role in how opportunities, wealth, and knowledge are distributed.
Topics: AI, Economics, Capitalism, Automation
4
4.0
Mar 16, 2021
03/21
by
ANAS ELALAOUI (passion_tech)
data
eye 4
favorite 0
comment 0
I used this box for a multisensor project with a Node Mcu. I would have bought one from the store but it is not available in my area. Please buy electric boxes from your local store and verify if it complies with your local electric code when purchasing online. Use this print at your own risk. This can ONLY be suitable for low voltage, low current DIY projects if power supply is placed elsewhere. I will not be held responsible for any type of use related to this print.
Topics: thingiverse, DIY, home_automation, DIY_electronics, stl, NodeMCU_ESP8266
11
11
Jun 18, 2020
06/20
by
AQUILA CLOUDS
image
eye 11
favorite 0
comment 0
AQUILA CLOUDS
Topics: CLOUD, AUTOMATION, COMPUTING
What is happening in the oilfields of the world as a result of the COVID pandemic? To what extent is the oilfield service industry being decimated from this downturn? Post-pandemic, how will the industry change? These are just some of the questions we asked Kevin Neveu, President and Chief Executive Officer at Precision Drilling, a [...]The post An Interview with CEO of Precision Drilling, Kevin Neveu first appeared on ARC Energy Research Institute.
Topics: Podcast, automation, cost, drilling, oil and gas, oilfield services, services sector, upstream
2
2.0
Jul 22, 2021
07/21
by
Aaron Baff (Drizzt321)
data
eye 2
favorite 0
comment 0
I live in an apartment and changing all my bulbs to be smart RGB/WW/CW bulbs, and wanting to just have the normal on-off available for me/myself, instead of having to reach for phones or what not. But didn't want to mess with the wall switches, because that opens me up to liability if anything ever happens. And a PITA when I live. So I created this cover to go over the existing rocker switches, and have a place for some ZigBee switches. This is for a standard US double-wide (2 switch) box, as...
Topics: light_switch, home_automation, DIY, stl, thingiverse, smarthome
11
11
Jan 18, 2021
01/21
by
Aaron Baldwin (acbaldwi)
data
eye 11
favorite 0
comment 0
I extended the sides a bit to hide the micro usb cable, it nos sits inside the frame still allowing you to power the tablet on and off through the side hole
Topics: home_automation, thingiverse, Tablet, tablet, wall_mount, stl
9
9.0
Jan 18, 2021
01/21
by
Aaron Baldwin (acbaldwi)
data
eye 9
favorite 0
comment 0
Wall Mount for a 10" Acer iconia tablet designed for my home as a home automation panel. Back has an inset for a 90 degree usb micro cable so it sits flush
Topics: home_automation, thingiverse, Tablet, tablet, wall_mount, stl
3
3.0
Mar 18, 2021
03/21
by
Aaron Jasso (aaronjasso)
data
eye 3
favorite 0
comment 0
# Update - v2 (8.13.2019) As I tried this enclosure with different DHT11 shields, I found that the lid didn't fit some shields. I also had issues with some off-brand Wemos D1 Minis not fitting in the base. So I've increased the tolerance in the base and the lid to allow for some variance in manufacture. I recommend you use the v2 versions of the Base and Lid. I also made a spacer to get the separation right when soldering the shield to the Wemos D1 Mini. The pictures show how to use it. New...
Topics: humidity, hassio, wemos, humidity_sensor, temperature, Electronics, esphome, home automation,...
1
1.0
May 11, 2022
05/22
by
Abdel-Kader, Magdy G
texts
eye 1
favorite 0
comment 0
xvi, 350 pages : 23 cm
Topics: Manufacturing resource planning, Capital investments -- Decision making, Manufacturing processes --...
