0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Andrea Carriere (Andre470)
data
eye 0
favorite 0
comment 0
Self-designed sailboat hull using solidworks. The boat is still not completed, As soon as I can, I will add other components such as the keel, rudders, mast etc. The boat will be primarily a static model, but I can try to make also a RC model (In this case I will need time to make the necessary tests) . During the design period, it is possible that the actual components are updated or completely replaced.
Topics: stl, Boat_hull, hull, sailboat, sailing, thingiverse, 3D Printing
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Steven Munger (stevem37)
data
eye 0
favorite 0
comment 0
This is a reimagined version of the Bat Boat. Enjoy!
Topics: stl, superhero, boat, jla, Superman, batman, Vehicles, thingiverse
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
MAX BIGDRAGON1234 (BIGDRAGON1234)
data
eye 0
favorite 0
comment 0
boat dc motor 9v speed boat.
Topics: stl, speed boat, thingiverse, 3D Printing
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
(ko3Des)
data
eye 0
favorite 0
comment 0
Can't find it on Thingiverse, so I made it by myself. I paddled to hard and I broke one of the connector nuts on my kayak paddle. Each paddle have 4 of them (3 piece padlle). Be carefull with the support. You need it, but not too much. It's hard to remove the supports in the tread if its too dense.
Topics: stl, Inflatable_Kayak, Sport & Outdoors, kayak, Bestway, inflatable_boat, canoe, paddle, nut,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Marc Mouret (Picamboule)
data
eye 0
favorite 0
comment 0
This is a simple switch support for easy access, if you have to replace your ESC with a HobbyWing SeaKing. Just slip the switch on the support and use the servo support screws to fix it.
Topics: stl, ProBoat, R/C Vehicles, River Jet, Pro Boat, thingiverse
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
AntoDelG (AntoDelG)
data
eye 0
favorite 0
comment 0
Window Opening Regulator for Boats
Topics: stl, opening_tool, Sport & Outdoors, boat, thingiverse, windows
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Johannes Lang (jola1)
data
eye 0
favorite 0
comment 0
This guide closes the sail entry to hold sail sliders on the mast. This guide is designed for John Mast Profile 125E that is used on International 806 sailing boats. There are two identical parts one for the lower half one for the upper. To insert/remove sail sliders you only need to remove one half. Printed it in PLA (3DJake ECO PLA) for testing, but it seems the mast does not get to hot to deform the part.
Topics: stl, sail_boat, Sport & Outdoors, sailboat, sailing, thingiverse
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Svenska Landskapsbilder
image
eye 0
favorite 0
comment 0
Vaxholm - August 16th, 2022.
Topics: vaxholm, stockholm, sweden, stromma, cinderella, waxholmsbolaget, båttur, båt, boat, skärgården
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
J Smith (WareBuilt)
data
eye 0
favorite 0
comment 0
This is a functioning 3d printed RC Tug Boat that has been designed using rene76’s Thing:2840309 hull and parts as a starting platform. Included with this design is the original (unmodified) hull files, a number of custom designed parts, an example list of hardware & electronics that can be used, and links to other Thingiverse parts to aid in completing this as a fully functioning RC model. All parts were printed in PLA, most parts with 50% infill, motor mount and rudder ring 100% infill,...
Topics: stl, R/C Vehicles, RC_Boat, thingiverse, Tugboat
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Jim Håkansson (bm234)
data
eye 0
favorite 0
comment 0
A simple distance for the cover to a Lewmar CRW 400 Windlasse, the size is for the upper distance
Topics: stl, boat, anchor, thingiverse, lewmar, Other
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Marek Vejsicky (markosaurus)
data
eye 0
favorite 0
comment 0
There is part that goes to wall and the other one is coming soon
Topics: blind, stl, sea, cabinshade, sail, boat, yacht, skyshade, air, ocean, sailboat, oceanair,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Anthony B (NS-Maker)
data
eye 0
favorite 0
comment 0
This is the foot piece that keeps breaking on me. Should work with support bars similar to Taylor Made 1636 Windshield Support. Had one that lasted over a year printed in PLA. It didnt fail, it was broken by one of my guests so not sure how long it will last without user error.. lol
Topics: stl, brace, boat, Boating, foot, repair, windshield, support, thingiverse, Other
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Pawel Spychalski (DzikuVx)
data
eye 0
favorite 0
comment 0
Very simple RC boat with paddle wheels. Propulsion with 2 continous rotation servos. I converted 2 SG90S 9g servos to continous rotation. Here is a manual on how to do it https://learn.adafruit.com/modifying-servos-for-continuous-rotation Print with PLA or similar. LW-PLA seems to work great. Some elements have to glued in place. Some printed with supports. Put a lot of weight into the keel. I used lead fishing weights.
Topics: stl, boat, R/C Vehicles, RC_Boat, thingiverse
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Dennis vd meer (Dennis_Thingiverse_User)
data
eye 0
favorite 0
comment 0
Made a toy boat for my daughter, it floats surprisingly well. Print the model with a raft and all will work fine. Have fun
Topics: boat, Toys & Games, bathtub, bath, water, stl, thingiverse, toy
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Stian Ervik Wahlvaag (agepbiz)
data
eye 0
favorite 0
comment 0
Easy to print and fun boat for the bathtub. 1:25 scale. The model is inspired by a Whaly 310. This model can be printed without supports but some supports in the fore will improve the bridging (see photo). The parts needs to be glued together. Add a thin string through the ropeholders for extra details. The prints in the photos was printed on a Prusa Mini+ using Fiberlogy FiberSatin with 0.2mm layer height Subscribe or follow me on: Instagram: https://www.instagram.com/agepbiz/ YouTube:...
Topics: boat, bathtub, Summer, stl, thingiverse, Vehicles, toy
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Chandler Allen (ceazzy)
data
eye 0
favorite 0
comment 0
I printed this with Duramic PLA Plus with 85% infill. Since it is PLA it will definitely warp in the sun if printed with a low infill and may even still warp with a high infill. To be safe, I would use PETG, but I did not have any on hand. Layer Height is 0.24 I attached it to my bass boat with outdoor heavy duty velcro. Could also use mounting tape.
Topics: boat, Sport & Outdoors, fishing_lure, organizer, lure, stl, bass, thingiverse, tools, hook,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Daniel Kolesar (Dankolesar)
data
eye 0
favorite 0
comment 0
Mountable lure holder for boats to allow quick access and quick storage to your lures while youre on the water. Large square hole on left holds a small pair of pliers and holes on the right designed for either larger hooks to be stored or for carabiners to be attached.
Topics: boat, Sport & Outdoors, fishing_lure, lures, lure, stl, bass, thingiverse, holder,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Eleytherios Kafenzakis (sv5byp)
data
eye 0
favorite 0
comment 0
Pla anchor No supports 200C Nozze 55C Bed
Topics: boat, neclace, key chain, neclaces, propeller, sheap, Anchor key chain, agyra, anchor neclace, stl,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Joel Hall (Snortimer)
data
eye 0
favorite 0
comment 0
This adapter will allow you to wind your 5" Schacht shuttle bobbins on any modern cordless drill. Print it on its side with a flat side down, and no supports are required. Low to medium infill. It's designed so that it'll have maximum strength when printed on a flat side. It might work with other bobbins up to 7" in length with a 7.85mm internal diameter as well, though those longer bobbins will stick off the end of the adapter.
Topics: Winder, Schacht, stl, drill adapter, boat shuttle, thingiverse, DIY, bobbin winder
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Anycubic Community (Anycubic_Community)
data
eye 0
favorite 0
comment 0
Follow Anycubic to get more quality models.
Topics: boat, Anycubic, stl, thingiverse, Vehicles, craft
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
William Robinson (Prosafetypilot)
data
eye 0
favorite 0
comment 0
***PRINT SCALE x1000 FOR PROPER DIMENTIONS*** This rod holder fits pontoon boats with square 1-1/4" railing. Print with 100% infill on its side at x1000 scale for proper dimensions. This is very strong and has held my fishing rod quite nicely when catching fish.
Topics: boat, Sport & Outdoors, stl, boating, fishing_rod, boat_accessories, thingiverse,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Lucas Meyers (lucas4)
data
eye 0
favorite 0
comment 0
This is my first design for 3D printing. This boat is a loose 1:100 scale model of a 1987 32' Wellcraft St. Tropez. I made this as a gift and have decided to blur the text on the base for privacy. I designed the boat first, and then wanted a base to display it. The boat sits nicely in the base without any sanding, even tight enough to hold upside down. Ideally I would've printed the waves in blue, but I didn't have any at the time. I've included obj. files for the boat and base if you'd like to...
Topics: boat, display, model, stl, wave, waves, thingiverse, Vehicles, display_stand
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Nate G. (ganst949)
data
eye 0
favorite 0
comment 0
I modeled a classic boat helm from scratch after not being able to find a good model that didn't have mesh errors. Please enjoy.
Topics: boat, steering, ship, rudder, model, wheel, sailboat, stl, sail, thingiverse, classic, Vehicles,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Rob Shuttleworth (ShuttleSpace)
data
eye 0
favorite 0
comment 0
A simple way to connect the 7/8" diameter PVC conduit to the 1" diameter railing of a boat. Print in image orientation, with supports, so the clip is strongest (if FDM is used). Edit tree is here: https://3dorchard.com/app/single/62d7faf7ae9b8b0bccdc3bbe/62e27e4aae9b8b0bccdc3c1f There is a newer version with stops to hold the tie wraps or wire in place. See link above. Earlier version had 3/4" hole, should be 7/8, a few bugs editing the model so bake sure the file 'final.stl' is...
Topics: boat, railing, round, stl, conduit, thingiverse, marine, attachment, frame, tarp, Replacement...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Sammy Johnson (Minigeek55)
data
eye 0
favorite 0
comment 0
The USS Missouri V2 is here and ready for to set sail!! The ship is almost exactly the same as the first one i made, but with a few differences. The ship is still the same size, but the main differences is the sip is divided into 5 hull sections instead of 10 which means the parts are made for larger printers, the superstructure parts are cut for easier printing, and designed for Rc parts. This ship is designed to work with a motor for 2 propellers and i will post instructions soon on how to do...
Topics: boat, Rc boat, missouri, stl, battleship, thingiverse, R/C Vehicles
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Dominic Ruch (Dominic_Ruch)
data
eye 0
favorite 0
comment 0
Created with Fusion 360 after original propeller. Has not yet been tested, update follow.
Topics: RC_Boat, traxxas, propeller, stl, thingiverse, prop, R/C Vehicles
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
AntoDelG (AntoDelG)
data
eye 0
favorite 0
comment 0
Furuno 1623 LCD Display Mounting Bracket ABS or PETG
Topics: Furuno 1623, boat, radar, Sport & Outdoors, Display, stl, thingiverse, Furuno,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Ola Andersson (Grimenir)
data
eye 0
favorite 0
comment 0
This is just a free Bath bucket that I designed when doing crowsnest for my Boats & Barges kickstarter. So decided to give it away as a free promo. If you are intrested in the modular Boats & Barges, check it out https://www.kickstarter.com/projects/nirmalas3d/nirmala-modular-boats-and-barges Ola Andersson Nirmala Miniatura art
Topics: 32mm, ship, scale_model, Roleplaying, warhammer, model, dnd, 28mm, RPG, miniature, boat, modular,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Rob Shuttleworth (ShuttleSpace)
data
eye 0
favorite 0
comment 0
3 pieces in the file. A tight fit for 1" rail or tubing should hold the cover or tarp in place during bad weather. See the edit tree if you wanna make any modifications. https://3dorchard.com/app/single/62d7faf7ae9b8b0bccdc3bbe/62d9a34cae9b8b0bccdc3bf1 Print close to 100% infill for best performance. Doesn't seem to be visible in my uploads after 5 hours even
Topics: boat, set, sheet, waterproof, tent, stl, multiple, thingiverse, marine, attachment, tarp, clips,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Stephen Powell (iggysoup)
data
eye 0
favorite 0
comment 0
I left the mounting holes blank since each light is slightly different. Just drill them out and screw the light on top. Use shock cord or rope to tie to the bow d-ring and inside hook.
Topics: Sport & Outdoors, stl, thingiverse, Navigation light, inflatable boat, RIB
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Sammy Johnson (Minigeek55)
data
eye 0
favorite 0
comment 0
This is the Battleship USS Missouri version 2!!! It's the exact same size and model as my first ship. There are many changes to this model including cut super structure sections for easier printing, RC motor mounts, and more. The only drawback to this version compared to the other version is the hull sections are joined so instead of 10 hull pieces, there are now 5 for a stronger hull. I tried my best to cut the super structures so they can be easier to print, but some of the pieces still may...
Topics: boat, missouri, Hobby, stl, battleship, thingiverse, rc boat
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
wyatt buntin (BIG_ES_RC)
data
eye 0
favorite 0
comment 0
just a john boat i designed because there isnt a free one anywhere i could find!!! you can scale it to whatever size you want!! enjoy! please post your makes the jet is not mine...
Topics: losi, WPL_Crawler, scale_model, rc_crawler, RC_Boat, crawler, Axial, Redcat, boat, WPL,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Alice Fox (Openair)
data
eye 0
favorite 0
comment 0
Hello my friend! Please visit my new website https://kompaswork.ru/stati.html read my articles and publications. Welcome to my YouTube channel https://www.youtube.com/channel/UChrjsTzAQM8Mj8__pwc4gCg/videos like and comment. I wish you health, happiness and good luck. Thanks!
Topics: boat, vessel, Machine Tools, vessels, shadow, stl, thingiverse, trimaran
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Philipp (Bernie_macht_das)
data
eye 0
favorite 0
comment 0
Hier nochmal der Rumpf als komplette Datei.
Topics: Benchy, stl, RC Benchy, Tug Boat, thingiverse, R/C Vehicles
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
David Gramelspacher (MajGuns)
data
eye 0
favorite 0
comment 0
I did not design this but ot was a project I downloaded years ago and did not see on here anymore. I thought I would share it again.
Topics: Outdoor & Garden, stl, thingiverse, Avacado, Grow_Avacado_Seeds, Avacado_boat
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Niklas Åkerlund (Nakerlund)
data
eye 0
favorite 0
comment 0
This is a small horned cleat with space for embedding M5 nuts. It is designed for mounting on a firm material as it lacks a base. Lines will push down against the surface. This also allows the model to be printed upside down without any support. Dimensions: 100mm wide 20mm high 10mm thick 30mm between fastenings M5 nut size: 4mm high 8mm wide (between flats) Minimum M5 screw / bolt length: 20mm
Topics: Sport & Outdoors, tiedown, rope, Boat, m5_nut, cleat, sailboat, stl, fastener, Horned_Cleat,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Stephen Powell (iggysoup)
data
eye 0
favorite 0
comment 0
Used to attach the cover on my inflatable boat. Zip tie or bungie to the cover and it latched onto the rub rail of the boat. Works like a champ.
Topics: Sport & Outdoors, RIB boat cover, Zodiak, stl, thingiverse, RIB
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Christian Haaramäki (ChristianHaaramaki)
data
eye 0
favorite 0
comment 0
3d printed autonomous sailboat straight from youtube! Team Rapidus decided to release the full model for everyone to play with and make their own! *not recommended to make the same size as we did even though it is cool* IMPORTANT! This is not a simple build! it can be simplified and should be. Do not print this in PLA if you intend to actually use it. Use ASA, ABS or other UV resistant materials that have good temperature resistance. There are many things you should change before printing this...
Topics: boat, vessel, autonomous sailboat, toy_boat, Autodesk_Fusion_360, rapidus, rapidus youtube,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
texts
eye 0
favorite 0
comment 0
Plans to build the Happy Clam Skiff.
Topics: Skiff, Boat, Plans, DIY, Build, Create, Construct, Project
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Luis Marx (luisengineering1)
data
eye 0
favorite 0
comment 0
Video on Youtube: https://youtu.be/mgOHi9M1HmE Code to control the boat with two esp8266: https://github.com/lusengineering/Benchy-tugboat Parts List: (Not affiliate links because i don´t know how tu use them) Motor: Racerstar 2207 (1600KV Version): https://de.banggood.com/Racerstar-2207-BR2207S-Fire-Edition-1600KV-2200KV-2500KV-3-6S-Brushless-Motor-For-RC-Drone-Frame-Kit-p-1280475.html?imageAb=1&akmClientCountry=DE&cur_warehouse=CN&ID=47986 Props:...
Topics: rc benchy, tugboat, stl, benchy, thingiverse, rc boat, R/C Vehicles
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
DaveMakesStuff (DaveMakesStuff)
data
eye 0
favorite 0
comment 0
The hull and walls of this Benchy are built with face-centered cubic lattice structure. Great to show off your resin printer, but not very seaworthy. See here for video: https://youtu.be/JXszXspeMn4 As is, the model is approximately 100mm in length and the lattice structures are 1mm diameter. The model scales well if you need to make the lattice structures more visible. See here for stable download: https://social.thangs.com/m/124949
Topics: boat, calibration, 3D_Benchy, 3DBenchy, resin, ntopology, 3dbenchy_boat, stl, lattice, benchy,...
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Jeremy Divin (patooyee)
data
eye 0
favorite 0
comment 0
Based on Timothy Matthew's Youtube video of how to make it out of a PVC pipe: https://www.youtube.com/watch?v=fX6MN0gSpHc Worked great for me. Printed solid at .5mm layers with a .8mm nozzle but could be done with nearly anything. Easy print.
Topics: boat, Sport & Outdoors, volvo, dual prop, stl, thingiverse, penta, tool
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
voodou warner (voodou)
data
eye 0
favorite 0
comment 0
When it's hard to push the binding button use the binder. Don't need a toothpick anymore.
Topics: stl, rc car, thingiverse, rc boat, rc copter, rc receiver, bind, R/C Vehicles
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Vas ΑΝΔΡΙΑΝΟΠΟΥΛΟΣ (dave481985)
data
eye 0
favorite 0
comment 0
This is an adapter for the intex excursion pro kayak valve so that you can inflate the kayak with regular hand pumps or electric pumps.
Topics: Sport & Outdoors, air_pump, inflatable, intex, Inflatable_Kayak, pump_adapter, valve,...
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Simon Tunje (Tunje)
data
eye 0
favorite 0
comment 0
This is my first model iv designed, its made to be the ship from the dnd campain saltmarsh, we call it the pipedream! If you want to aid me in making more ships and more i have a donations link! https://www.paypal.com/donate/?hosted_button_id=DCWRTBHQ249BQ
Topics: boat, dnd, stl, thingiverse, Vehicles, saltmarsh
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Owen Graham (OwenGMan)
data
eye 0
favorite 0
comment 0
Arrrrr! Ye be foolish to not download this precious model! Hi everyone, I'm back with a new L3go theme! I have decided to do the pirates theme that Lego System started in the 1980s and 1990s. I have created the Cross Bones Clipper, which I thought would be a good starting point for the pirate theme. This set was released in 1997 and I'm sure many of you (or your dads!) have or had this set. I will try to keep up with the Star Wars theme, but for now, I'll be focusing more on the pirate theme....
Topics: 1997, Boat, Lego System, stl, Models, Lego, thingiverse, Pirates
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
audio
eye 0
favorite 0
comment 0
We manufacture and install the most quality boat lift cover in all of SWFL. We frequent are installs in the towns of Cape Coral FL, Fort Myers FL, Pine Island Flordia & More. We also make our boat lift canopy tops in house to insure they are the most durable in the area! Coast Line Boat Lift Covers in Cape Coral FL 905 SE 29th ST, Cape Coral FL 33904 (239) 494-6968 https://coastlineboatliftcovers.com/
Topic: Coast Line Boat Lift Covers in Cape Coral FL
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Pointless 3D (Pointless3D)
data
eye 0
favorite 0
comment 0
This is a small modification for the RC Jet Boat by 3dimensionschannel Before building the boat use these parts instead of the original for the mod to work
Topics: #rc, #jet boat, stl, #jetboat, thingiverse, #ride plate, R/C Vehicles
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
jacob carpenter (jacobcarpenter)
data
eye 0
favorite 0
comment 0
basic two peice mono hull rc speed boat
Topics: boat, RC_Boat, stl, thingiverse, Other
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Robert Ww (Robert_W)
data
eye 0
favorite 0
comment 0
###Modifizierter Einsatz für Hobbyking Swamp Dawg *(for the english version see below)* ####Ich habe mir ein gebrauchtes Sumpfboot Swamp Dawg von Hobbyking gekauft: - Einer der Vorbesitzer hat in der RC-Box die Halterung für die vier Befestigungsschrauben entfernt. - Als Ergebnis hat die RC-Box am Boden nun vier Lösher über die das Wasser in den Bootsrumpf läuft. Das positive daran, es bleibt kein Wasser in der RC-Box stehen. - Um das Wasser aus dem Bootsrumpf zu bekommen, habe ich an der...
Topics: Swamp_boat, stl, thingiverse, swampboat, Swamp Dawg, R/C Vehicles
