5
5.0
Apr 19, 2022
04/22
by
(Clau_00)
data
eye 5
favorite 0
comment 0
I designed a "BMW MOTORSPORT" badge for an BMW E30 grille. Normally there is the M3 or the M-TECHNIC badge, but an BMW MOTORSPORT badge is cool, too. You need to print the badge and the holder. Make sure to print the same size, otherwise it won´t fit anymore. Raft is very important to prevent warping. Also you need a little screw to screw them together. After a little bit of sanding, i sprayed a filler on it, so that the printing texture isn`t visible anymore. Then i sprayed it...
Topics: thingiverse, motorsport, badge_holder, Automotive, grill, E30, badge, car, stl, grille, tuning,...
4
4.0
Jun 11, 2021
06/21
by
(DW1988)
data
eye 4
favorite 0
comment 0
Summary Mocal Oil Cooler for RC Cars Hi everyone! Here is my Oil Cooler (Mocal Style) for 1/10 Cars or Dioramas Update: 08.11.2019 First Upload I would appreciate it, if you post a "made" one :) My other 1/10 Parts BatteryTurbo and Airfilter CombinationBride Style Racing SeatK&N Air FilterSparco Racing WheelIntercoolerOil Cooler How to support me If you want to throw a little support my way please follow the Amazon links to the things I use. Filament:https://amzn.to/2BKxCM9...
Topics: scale_model, 110_Scale, RC_Car, diorama, thingiverse, cooler, oil, scale, tuning, oilcooler, 110,...
5
5.0
Jun 11, 2021
06/21
by
(DW1988)
data
eye 5
favorite 0
comment 0
Summary Battery 1/10 Hi guys, Here is my Battery for 1/10 Cars or Dioramas Look at my other Stuff to :) Update: 05.11.2019 First Upload I would appreciate it, if you post a "made" one :)
Topics: RC_Car, varta, diorama, thingiverse, scale, rc_car_parts, battery, tuning, 110_scale, 110,...
11
11
Apr 27, 2021
04/21
by
(DogP)
data
eye 11
favorite 0
comment 0
This is a 3D printed case for the open source and low cost SLC Free Wideband O2 sensor controller from 14point7 ( http://www.14point7.com/products/slc-free ). This controller will connect to a wideband oxygen sensor (Bosch LSU 4.9 or LSU 4.2) and tell you the Lambda value (Air to Fuel ratio) of your exhaust. It has a linear output, as well as a narrowband output, which emulates a narrowband O2 sensor. I didn't like the metal standoffs included, nor having just a bare PCB exposed while using it,...
Topics: tuning, thingiverse, bosch lsu, lambda, slc free, stl, o2 sensor, Automotive, oxygen sensor,...
6
6.0
Apr 19, 2021
04/21
by
(TeamFTP)
data
eye 6
favorite 0
comment 0
Print in ABS as this will withstand the engine temperatures a bit more. This slips on to the original Mini MPI airbox with no modifications needed. Genuinely gives it a little more zoom zoom and sounds better :-)
Topics: thingiverse, cooper, classic, air, filter, air flow, autin, austin, airflow, airbox, tuning, stl,...
12
12
Apr 5, 2021
04/21
by
(dddprint)
data
eye 12
favorite 0
comment 0
Pan flute with screw-plugs for precise tuning. Haven't tested it yet but it should work.
Topics: thingiverse, tunable, pan, Music, stl, tuning, flute
3
3.0
Jun 6, 2021
06/21
by
(dprkr)
data
eye 3
favorite 0
comment 0
This is a tuning key for screw style tuning pegs (see photos). I also added a revision to the original design that is in the photo that added a little more structure to the part.
Topics: tuning_pegs, Ukulele, tuning_key, thingiverse, stl, Music
4
4.0
Apr 16, 2021
04/21
by
(foofoodog)
data
eye 4
favorite 0
comment 0
Item specific to vendors make and model to allow for fine Z axis stop adjustment.
Topics: prusa, adjustment, i3, 3D Printer Parts, 2020, thingiverse, stl, z_axis, tuning, folger
5
5.0
Jun 12, 2021
06/21
by
(geoffpalmeruk)
data
eye 5
favorite 0
comment 0
Summary Quick and dirty phone holder to be mounted in Audi TT Mk1. Remove vents first and then attach phone using Neodinium Magnets. I bought a cheap (£1.50) phone holder from a popular auction site and used that for the magnets. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.28 Infill: 10% Filament: AMAZ3D PLA Black Notes: Printed with a brim to ensure good ahesion
Topics: Audi TT, Car, Modified Car, Audi 8n, Audi TT 8n, Phone Holder, Audi TT Mk1, thingiverse, Tuning,...
5
5.0
Mar 20, 2021
03/21
by
(jdoll)
data
eye 5
favorite 0
comment 0
Tuning peg (print a set of 4) for use with Playable Ukulele thing 268090.
Topics: stl, ukulele, tuning, thingiverse, Music
3
3.0
Jan 5, 2021
01/21
by
(jeahjeah)
data
eye 3
favorite 0
comment 0
A Front mount for the Artillery Sidewinder X1. It's designed to be clamped to the Bed Handle without screws or anything. Also disasembling the Bed Handle isnt necessarry, you can just clamp with a little pressure the LED Mount to the handle. As LED Strip i used LED Strip from IKEA which can be powered with USB (attached to my raspberry which is connected to the Sidewinder) https://www.ikea.com/de/de/p/dioder-lichtleiste-led-weiss-30420556/ OR...
Topics: halterung, upgrade, front led mount, sidewinder x1, front, led halterung, light, front mount led,...
7
7.0
Jun 11, 2021
06/21
by
(le_Gle)
data
eye 7
favorite 0
comment 0
Summary 335i (F30/F31) N55 Turbo L6 3.0L Gas 435i (F32/F34) N55 Turbo L6 3.0L Gas 435ix (F32/33) N55 (turbo) L6 3.0L Gas M135i (F20/F21) N55 turbo L6 3.0L Gas M135ix xDrive (F20/F21) N55 turbo L6 3.0L Gas M2 (F87) N55 Turbo L6 3.0L Gas M235i (F22/F23) N55 turbo L6 3.0L Gas M235ix xDrive (F22/F23) N55 turbo L6 3.0L Gas Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: Yes
Topics: thingiverse, BMW, tuning, stl
9
9.0
Apr 22, 2021
04/21
by
(phoTWOgrapher)
data
eye 9
favorite 0
comment 0
Edit: I Made 5 angular versions of the 37mm Connector. 7, 10, 12, 17, 20° to get that spidey look and less prop in your Field of View! I wanted to extend my Frame´s Arms and came to the Idea to Put some 16mm Tubes on it. That means 13" Props for 250mm long Tubes ;) This is the Result i wanted to share with the Community ;) The Connector comes in 3 different Heights. You need 50-45mm M3 Screws for the 37mm Height (original height) 40-45mm M3 Screws for the 32mm Height 35mm M3 Screws for...
Topics: f450, tbs, tuning, carbon, discovery, stl, thingiverse, tube, R/C Vehicles, copter
3
3.0
Apr 19, 2022
04/22
by
(rosoar)
data
eye 3
favorite 0
comment 0
PLEASE NOTE: This is designed for resin printers. Allthough it could be possible to print on an FDM printer, resin printers are perfect for this. Let me know how it worked i case you tried it. Not all 3018pro´s are the same, i bought the RATTMMOTOR CNC 3018 PRO MAX ------------------------------------------------------------------------------------------------------------------------ This thing is a big upgrade to stiffen up your 3018pro CNC with linear rails and a 50mm z-axis movement....
Topics: parts, milling, cnc3018, cnc3018pro, stl, cnc_parts, cnc_mill, 3018 upgrade, CNC_Machine, 3018pro,...
10
10.0
Apr 23, 2021
04/21
by
-- -- (Mape)
data
eye 10
favorite 0
comment 0
Flat feet to put under Ultimaker 2 to reduce noise. These feet provide a flat surface that is then easier to soften to isolate vibrations. I used some 3M "Multi Purpose Sealing and Insulation Tape" under the feet for soft cushioning. Also printing the feet from Ninjaflex or some similar material might work, but I didn't have any.
Topics: noise_dampener, 3d_printer_tuning, 3D_Printer_Parts, ultimaker_2, ultimaker2, printer_feet, feet,...
3
3.0
May 20, 2021
05/21
by
A. R. (rolleyflex)
data
eye 3
favorite 0
comment 0
LED strip support for PC case The support is slanted at 45° to directly illuminate the inside of the case, and increase LED light effect. Assemble as supports as necessary by adding inserts between two module to match your desired length. If you want you can add a piece a tracing paper in the 2 lips of the support to obtain a "fuzzing light " effect.
Topics: case_modding, Computer, led_strip, pc_modding, computer_case, thingiverse, LED, tuning, case, stl
12
12
Nov 27, 2021
11/21
by
ARD
movies
eye 12
favorite 0
comment 0
Gehirn-Tuning • Kann das unsere Leistung verbessern? • BR 2021 Muskeln per Gehirn beeinflussen – geht das? Die Neuroathletik geht davon aus, dass man das Gehirn direkt trainieren kann, zum Beispiel über Augenübungen und Gleichgewichtsübungen. Das Neurofeedback geht noch einen Schritt weiter. Ziel ist es, die Aktivität im Gehirn willentlich zu beeinflussen. Die Gehirnströme werden gemessen und in Echtzeit mit einem gesunden Normalwert verglichen.
Topics: Gehirn-Tuning, Kann das unsere Leistung verbessern, Gehirnforschung, Gehirnleistung
Database Systems Design, Implementation, And Management
Topics: data, database, table, sql, figure, query, dbms, entity, transaction, relational, primary key,...
Theoretical Newroscience
Topics: equation, firing, figure, stimulus, neurons, neuron, model, function, spike, december, firing rate,...
Intelligence Emerging Adaptivity And Search In Evolving Neural Systems
Topics: neural, search, neurons, figure, networks, evolutionary, neuron, learning, chapter, network, neural...
today we are living in the world of data science, where we have to handle bulk amount of data to run any organization. To accomplish the goal of any organization its mandatory to take right decision at the right time. For this data is maintained in the form of data ware housing and for the extract, transform and load majorly informatics power center tool is used by organization. So in this paper we have shared the complete informatics power center logics, that will be useful not only for...
Topics: Computer Engineering, debugger, performance tuning, udf
6
6.0
Apr 8, 2021
04/21
by
Adam Mikitzel (mikitz)
data
eye 6
favorite 0
comment 0
Tuning pegs for Playable Ukelele - Printable w/no Supports. These can also be scaled and used for other string instruments. I'm thinking the F-F-Fiddle perhaps? There are no holes, perhaps someone can remix this and add a hole for the string to go through. I just drilled holes with my drill press.
Topics: tuning_pegs, pegs, stl, thingiverse, ukelele, Music, violin, guitar
3
3.0
Mar 19, 2021
03/21
by
Adrian Nilsson (ade2)
data
eye 3
favorite 0
comment 0
This is a small 30x30mm multi-testing calibration object. Print it to test your printer's mechanics and configuration. This object is designed for 0.4mm nozzles but will work on others too. Let me know if you'd like a specific variant in the comments. The cube is hollow with a 1mm roof and bottom. Things to look out for: - Ringing/ghosting (check the walls near dots and X/Y character) - Bridging (check bridges on left side, they are 4, 8 and 12mm) - Top layer finish (check top of cube) - Bed...
Topics: troubleshooting, Benchy, 3DBenchy, calibration, 3D Printing Tests, thingiverse, calibration_cube,...
7
7.0
Mar 4, 2021
03/21
by
Adrian Waiblinger (vk5zbr)
data
eye 7
favorite 0
comment 0
Tuning knob with a rubber grip. I have just started down the path of flexible filament. Im not quite there yet but im getting better prints. The first part of the print is the knob body, this is a adaption of my mBitx radio tuning knob I made before. This I do in ABS but anything is good. Next is the outside grip that I have printed in Bilby like rubber filament. This slides over the knob body. OK I have been playing around abit with the printing. The slower the better. I find 15 to 20mm/s is...
Topics: stl, knob, amateur radio, radio, tuning knob, VFO knob, ubitx, Electronics, Ham radio, thingiverse
6
6.0
Jan 7, 2021
01/21
by
Adriano Cotta Ramusino (whega)
data
eye 6
favorite 0
comment 0
A wheel model in the scale of Hot Wheels cars (approximately 1/64, but HW cars have oversized wheels). It's inspired by the classic 80's 4 spoke rim design popular in the JDM early drift scene. The simple and chunky shapes are specifically designed with filament printers in mind, since they struggle with tiny deatails, but resin printers will have no problem printing this of course. It can be printed with no supports, and the hole in the back is exactly the size of a normal ballpoint pen ink...
Topics: jdm, custom, toy, stl, Vehicles, tuning, japan, 80s, scale_model, car, scale, thingiverse, vintage,...
3,690
3.7K
May 26, 2017
05/17
by
Ahmed Elmalt
audio
eye 3,690
favorite 1
comment 0
الحُجة الغائية جدلية تجريبية على وجود الله، عادة ما بتعتمد على تحديد سمات وخواص تجريبية فى الكون من الممكن انها تشكل دليل على وجود تصميم ذكى، بيتطلب وجود عميل عاقل، ذكى، قادر. وبيتسدل على الله كأفضل تفسير منطقى للسمات والخواص دى. عائلة الحجج دى بتكتسب اسمها من الغاية او...
Topics: KalamFalsfa, Kalam Falsfa, Philosophy of Religion, Religion, God, Divine, Teleological Argument,...
14,711
15K
Jun 10, 2018
06/18
by
Ahmed Elmalt
audio
eye 14,711
favorite 1
comment 0
العلم والدين بيمثلوا مدرستين مختلفتين البشر بيدعوا انها بتطرح طرق الوصول للحقيقة وتكوين معرفة عن الواقع المحيط بينا. فى حين ان العلم بيركز بشكل كبير على العالم الطبيعى، الا ان نتائج البحث العلمى قد تقود فى بعض الاحيان لتبعيات نحو المعتقدات فى عوالم وكائنات فوق الطبيعة....
Topics: KalamFalsfa, Kalam Falsfa, Philosophy of Religion, Religion, God, Science, Big Bang Model,...
100
100
Apr 15, 2021
04/21
by
Alan Watt ~ Cutting Through the Matrix
audio
eye 100
favorite 2
comment 0
Alan Watt ~Blurb~ Your Thoughts Are Not Your Own, May 18, 2007 May 18, 2007 Alan Watt Blurb (i.e. Educational Talk) "Your Thoughts are Not Your Own - They're Just a-passin' Through - It's the Elite's New Science, Electronic Voodoo" © Alan Watt May 18, 2007
Topics: Political Control based on Modern Weaponry, Military-Industrial Complex, Pulsed Energy Weapons,...
136
136
Oct 14, 2018
10/18
by
Albert Murillo
audio
eye 136
favorite 0
comment 0
[ESP] Minutos antes de la representación de "I Puritani" de Vicenzo Bellini, la Orquestra Simfònica i Cor del Gran Teatre del Liceu afina todos sus instrumentos. [ENG] Minutes before the performance of "I Puritani" by Vicenzo Bellini, the SOrquestra Simfònica i Cor del Gran Teatre del Liceu refined all its instruments. [CAT] Minuts abans de la representació de "I Puritani" de Vicenzo Bellini, la Orquestra Soimfònica i Cor del Gran Teatre del Liceu afina tots...
Topics: orchestra, tuning, afinación
6
6.0
Apr 4, 2021
04/21
by
Albertas Agejevas (alga42)
data
eye 6
favorite 0
comment 0
Similar to Nismo spherical gear knobs with a skirt. This one is 46 mm in diameter, whereas the original is 42 mm. Has a conical hole at the bottom that M10 screws into.
Topics: thingiverse, automotive, tuning, stl, Automotive, freecad
4
4.0
Mar 15, 2021
03/21
by
Alessandro Perini (touchmysound)
data
eye 4
favorite 0
comment 0
The Tronicaltune system is a set of motorized tuning pegs for electric guitar that are meant to automatically tune the guitar at your command. I have hacked the tuning pegs so that they can be controlled via MIDI. With this mount you can attach them to your classical guitar.
Topics: classical, music, tuning_pegs, Music, thingiverse, alessandro perini, machine_heads, tronicaltune,...
3
3.0
Jun 10, 2021
06/21
by
Alex Mack (AmEx93)
data
eye 3
favorite 0
comment 0
This is a Cupra Keychain with Original Cupra Font
Topics: keychain, seat, car, Cupra, Keychains, thingiverse, keychains, tuning, stl
3
3.0
Aug 8, 2021
08/21
by
Alexander Demchenko (DragonOfSilence)
data
eye 3
favorite 0
comment 0
I made for myself a printed clamp for the folding mechanism, to replace my own. With this mechanism, it will no longer be possible to fold the steering bar, but because Since the scooter is extremely large and quite autonomous, it was almost never necessary to fold the steering bar. Therefore, I modeled the strongest possible mount. For installation, you need 8 M8 x 60 bolts and 8 flange nuts. The diameter is large enough to be tightened with a socket head ratchet.
Topics: T10-DMM, clamp, tuning, electric_scooter, thingiverse, zero_10x, KUGOO_G1, Folding_Clamp, Vehicles,...
11
11
Mar 12, 2021
03/21
by
Alexander Grigorev (alexan9er)
data
eye 11
favorite 0
comment 0
I changed the original thing http://www.thingiverse.com/thing:1930601 in following. Removed the end switch metal arm for better tuning the Z-level and added a step in a holder model to support this (see the photo of the installation). Changed the holder mounting holes distance - it was too big in the original thing and I cant mount it with both two screws. Shape modified for easier printing Updated 22.02.2017: Fixed the bottom holder length for correct endstop button positioning. The cap shape...
Topics: 3D Printer Parts, thingiverse, Anet_A8, tuning, z_endstop, stl
4
4.0
Mar 15, 2021
03/21
by
Alexander Katkov (Freston)
data
eye 4
favorite 0
comment 0
Insert to cover the hole.
Topics: thingiverse, tevo_tornado, tuning, stl, 3D Printer Parts
6
6.0
Jun 20, 2021
06/21
by
Alexis Colliard (cocoxis)
data
eye 6
favorite 0
comment 0
TPLink archer cover plate
Topics: network card, smile, TPLink, thingiverse, Other, stl, cover, pc tuning, What
10
10.0
Jan 27, 2017
01/17
by
Amine Beyhom
texts
eye 10
favorite 0
comment 0
Musicology and modality in Arabian music, lexical essay. Link to the publication http://nemo-online.org/wp-content/uploads/2016/12/INTERNET-2-01.-Article-NEMO-n%C2%B02-2-Lexique-Amine-Beyhom-Reissue-201612S.pdf
Topics: Accordage, Accordage et Tempéraments, Acoustics, Acoustique musicale, Acoustics, Adeline Poussin,...
3
3.0
Jun 7, 2021
06/21
by
Andrea (AndreaSignoretto)
data
eye 3
favorite 0
comment 0
Replacement Knob for the shift of Peugeot Ranch/partner and Citroen Berlingo cars, fit quite snug, I used PLA, but consider heat resistant plastic in case the car gets very hot on the sun... I managed to fit in the original knob swatch with numbers, you can do that or either use the version with number engraved. DISCLAIMER: replacement part NOT APPROVED by any Car parts manufacturer, use at your own risk! ciao!
Topics: Peugeot, peugeot_ranch, replacement_part, citroen_berlingo, thingiverse, Replacement Parts,...
5
5.0
Apr 8, 2021
04/21
by
Andrea (AndreaSignoretto)
data
eye 5
favorite 0
comment 0
I designed this small object as opto-end holder with the feature to tune the height of the opto, in order to register with high precision the height of the Hot-End in relation to the printingbed while changing between different beds and base materials. Thank You
Topics: finetuning, mendelmax_15, 3D Printer Parts, zero, end, 3d_printer, stl, opto, z_axis, thingiverse,...
4
4.0
Mar 24, 2021
03/21
by
Andrea (andrea00)
data
eye 4
favorite 0
comment 0
This is a filament guide for Anet A8.
Topics: stl, filament, thingiverse, filament_guide, AutoDesk, Inventor, 3D_printing, Anet_A8, tuning,...
11
11
Jan 19, 2021
01/21
by
Andrea Valentino (valand70)
data
eye 11
favorite 0
comment 0
I recently broke one of the tuner's knobs of my guitar and print a replacement... There are some little holes to reinforce the internal structure of the hole, to make sure it will not shear if the knob is a little tight to turn. The bolt diameter is 4.2mm and the knob fits tight and have to be pressed on, it is not a fault, it has to be a tight fit. ---------------------------------------------------------------------------------------------------- I created these links where you can find all...
Topics: Music, guitar, peg, thingiverse, string, tuner, tuning, knob, strings, stl
6
6.0
Apr 12, 2021
04/21
by
Andreas Markgraf (Anarel)
data
eye 6
favorite 0
comment 0
This is the logo of the Volkswagen R36 Engine, one of the most powerful engines produced for standard Volkwagen automobiles.
Topics: thingiverse, ProENGINEER, tuning, VW, car, Automotive, stl, sports_car, horsep, automobile, r36,...
16
16
May 11, 2016
05/16
by
Andrew Bailey
audio
eye 16
favorite 0
comment 0
This is my first podcast, so just an introduction on what I plan to do. Kind of I try to stay on point lol but a lot of working through as this is all new to me. But more to come about cars, cars, and cars!!
Topics: car, mods, car talk, engine, tuning, upgrade, turbo, all motor, built, supercharged, OEM plus...
6
6.0
Mar 25, 2021
03/21
by
Andrey Yeleskin (Quinta87)
data
eye 6
favorite 0
comment 0
"Retro" tuning dials for homebrew simple regen / superregen / direct conversion receivers. Thing in progress, you can customize it here https://www.tinkercad.com/things/2cydoKDzsSD-retro-radio-tuning-dial-and-grill/edit
Topics: stl, Ham_Radio, thingiverse, Electronics, tuning, Qrp
14
14
Jan 13, 2021
01/21
by
Andy Tane (VA3TNE)
data
eye 14
favorite 0
comment 0
My radio doesn't have a dimple on the tuning knob so I can rotate the knob with my fingertip. So, I made this button to stick on with a little piece of double sided tape. I printed a few in different sizes (resized in slicing software) and chose the one that fit my finger tip the best. I hope you find it more useful than replacing the whole knob. 73 Andy
Topics: spinner, thingiverse, Electronics, amateur_radio, stl, knob, Finger_spinner, tuning, Ham_Radio
Una puntata da favola!!! In questo 4 episodio parliamo del passato, presente e futuro del tuning sia estero che nostrano. Poi alcune chicche musicali ci faranno tornare a epoche particolari e infine una piccola sorpresa...... Buon Ascolto!!!
Topics: Podcast, musica, podcast, tuning, motori, race, auto, racing, automobili, rally, engine,...
110
110
Apr 2, 2013
04/13
by
Anthony Mark LaMort
audio
eye 110
favorite 0
comment 0
Three 'field recordings' I made on Maundy Thursday, 2013 while performing last minute (pre Easter!) organ maintenance on three different instruments in the state of New York. All three pieces are improvisations -- probably more intended to determine the condition of the organ than be musically expansive, though I thought they were at least interesting and worth preserving. Recording quality is fair at best as microphone placement and other factors were far from optimal. 1. There is a Green Hill...
Topics: Organ, Holy Thursday, Improvisation, Improvised Music, Hymns, Organ tuning, Anthony Mark LaMort,...
11
11
Jan 18, 2021
01/21
by
Antonio Nasti (Anto97)
data
eye 11
favorite 0
comment 0
Adattatore luci full led r3 H11
Topics: LED, led r3, H11, lampadina, thingiverse, VW_Polo, car, Parts, full led, tuning, stl
11
11
Apr 30, 2021
04/21
by
Antonis Magla (vegos)
data
eye 11
favorite 0
comment 0
A very simple guitar tuner washer. One of my washers broke, so that's a direct fit for Ibanez RG370DXZ. Printed with 100% infill.
Topics: stl, Music, Guitar_Tuner, tuning, peg, tuner, part, electric, RG370DXZ, RG370, spacer, guitar,...
Micro-tuning format parsing and frequency finding as a header-only C+ library This item contains old versions of the Arch Linux package for tuning-library . Website of the upstream project: https://surge-synth-team.org/tuning-library/ License: MIT See the Arch Linux Archive documentation for details.
Topics: archlinux, archlinux package, tuning-library
