Journal of Turbomachinery 2001: Vol 123 Index

Acharya, S., Eliades, V., and Nikitopoulos, D. E. — Heat Transfer
Enhancements in Rotating Two-Pass Coolant Channels With
Profiled Ribs: Part 1—Average Results. 123, 97-106

_____ (see Nikitopoulos, D. E.) 123, 107-114

Acharya, Sumanta — (see Pamula, Gautam) 123, 281-287

Agachev, R. — (see Syred, N.) 123, 609-613

Ameri, A. A. — Heat Transfer and Flow on the Blade Tip of a Gas
Turbine Equipped With a Mean-Camberline Strip. 123, 704—708

Arnulfi, Gianmario L., Giannattasio, Pietro, Micheli, Diego, and
Pinamonti, Piero — An Innovative Device for Passive
Control of Surge in Industrial Compression Systems. 123, 473-482

Arts, T. — (see Dénos, R.) 123, 81-89

Bailey, Jeremy C. — (see Bunker, Ronald S.) 123, 774-780

Baldauf, S., Schulz, A., and Wittig, S. — High-Resolution
Measurements of Local Heat Transfer Coefficients From
Discrete Hole Film Cooling. 123, 749-757

___, Schulz, A., and Wittig, S. — High-Resolution Measurements of

Local Effectiveness From Discrete Hole Film Cooling.
123, 758-765

Bauer, Michael — (see Riegler, Claus) 123, 372-378

Baumgarten, Sven — (see Friedrichs, Jens) 123, 483-489

Beacher, B. F. — (see Ehrich, F. F.) 123, 446-452

_____ (see Storace, A. F.) 123, 433-445

Bein, Thomas W. — (see Lee, Yu-Tai) 123, 73-79

_____ (see Lee, Yu-Tai) 123, 80(D)

Belz, Joachim — (see Carstens, Volker) 123, 402-408

Bergles, Arthur E. — (see Willett, Fred T.) 123, 288-295

Bogard, David G. — (see Ethridge, Marcia I.) 123, 231-237

_____ (see Harrington, Mark K.) 123, 798-805

Bons, Jeffrey P., Sondergaard, Rolf, and Rivir, Richard B.
— Turbine Separation Control Using Pulsed Vortex Generator Jets.
123, 198-206

= , Taylor, Robert P., McClain, Stephen T., and Rivir, Richard
B. — The Many Faces of Turbine Surface Roughness.
123, 739-748

Boyle, R. J., Spuckler, C. M., Lucci, B. L., and Camperchioli, W. P.
— Infrared Low-Temperature Turbine Vane Rough Surface Heat
Transfer Measurements. 123, 168-177

Bright, M. M. — (see Spakovszky, Z. S.) 123, 464-472

Bright, Michelle B. — (see Suder, Kenneth L.) 123, 14-23

Bright, Michelle M. — (see Wernet, Mark P.) 123, 418-428

Bryg, David J. — (see Jaw, Link C.) 123, 9-13

Bunker, Ronald S., and Bailey, Jeremy C. — Film Cooling Discharge
Coefficient Measurements in a Turbulated Passage With Internal
Crossflow. 123, 774-780

_____ (see Van Fossen, G. James) 123, 140-146

Camci, Cengiz — (see McLean, Christopher) 123, 687-696
______ (see McLean, Christopher) 123, 697-703

(see Uzol, Oguz) 123, 238-248

_____ (see Uzol, Oguz) 123, 249-257

Camperchioli, W. P. — (see Boyle, R. J.) 123, 168-177

830 / Vol. 123, OCTOBER 2001

All authors of papers published in this volume are listed alphabetically. Full titles are included in each first

author's entry. Letters in parentheses follow some of the page numbers: TB indicates Technical Brief, D indicates
Discussion, and E indicates Errata.

idex

Carstens, Volker, and Belz, Joachim — Numerical Investigation of
Nonlinear Fluid-Structure Interaction in Vibrating Compressor
Blades. 123, 402-408

_____ (see Gruber, Bjorn) 123, 409-417

Chen, Hamn-Ching — (see Jang, Yong-Jun) 123, 124-132

Childs, D. W. — (see Nielsen, K. K.) 123, 353-358

Chima, R. V. — (see Lepicovsky, J.) 123, 501-509

Cho, Hyung Hee, Kang, Seung Goo, and Rhee, Dong Ho
— Heat/Mass Transfer Measurement Within a Film Cooling Hole of
Square and Rectangular Cross Section. 123, 806-814
__, and Rhee, Dong Ho — Local Heat/Mass Transfer
Measurement on the Effusion Plate in Impingement/Effusion Cooling
Systems. 123, 601-608

Cousins, William T. — (see Jaw, Link C.) 123, 9-13

Cumpsty, N. A. — Discussion: ““Comparative Studies on Short and
Long Length-Scale Stall Cell Propagating in an Axial
Compressor Rotor” (Inoue, M., Kuroumaru, M., Tanino, T., Yoshida,
S., and Furukawa, M., 2001, ASME J. Turbomach., 123, pp.
24-30). 123, 31(D)

____ Discussion: “Direct Method for Optimization of a Centrifugal
Compressor Vaneless Diffuser” (Lee, Y.-T., Luo, L., and Bein,
T. W., 2001, ASME J. Turbomach., 123, pp. 73-79). 123, 79-80(D)
Discussion: “Rotating Instabilities in an Axial Compressor

Originating From the Fluctuating Blade Tip Vortex’ (Mailach, R.,
Lehmann, I., and Vogeler, K., 2001, ASME J. Turbomach.,
123, No. 3, pp. 453-460). 123, 461(D)

Cutbirth, J. Michael — (see Ethridge, Marcia I.) 123, 231-237

Dailey, Geoffrey M. — (see Son, Changmin) 123, 154-160

Dawes, W. N., Dhanasekaran, P. C., Demargne, A. A. J., Kellar, W.
P., and Savill, A. M. — Reducing Bottlenecks in the CAD-to-
Mesh-to-Solution Cycle Time to Allow CFD to Participate in Design.
123, 552-557

Demargne, A. A. J. — (see Dawes, W. N.) 123, 552-557

_____ (see Wallis, A. M.) 123, 334-341

Dénos, R., Arts, T., Paniagua, G., Michelassi, V., and Martelli, F.
— Investigation of the Unsteady Rotor Aerodynamics in a
Transonic Turbine Stage. 123, 81-89

Denton, J. D. — (see Wallis, A. M.) 123, 334-341

Dhanasekaran, P. C. — (see Dawes, W. N.) 123, 552-557

Dunn, Michael G. — Convective Heat Transfer and Aerodynamics in
Axial Flow Turbines. 123, 637-686

Ehrich, F. F., Spakovszky, Z. S., Martinez-Sanchez, M., Song, S. J.,
Wisler, D. C., Storace, A. F., Shin, H.-W., and Beacher, B. F.
— Unsteady Flow and Whirl-Inducing Forces in Axial-
Flow Compressors: Part II—Analysis. 123, 446-452
_____ (see Storace, A. F.) 123, 433-445
Ekkad, Srinath V. — (see Pamula, Gautam) 123, 281-287
Eliades, V. — (see Acharya, S.) 123, 97-106
_____ (see Nikitopoulos, D. E.) 123, 107-114

Transactions of the ASME

q
Turbomachinery
d
4
=
q

Acharya, S., Eliades, V., and Nikitopoulos, D. E. — Heat Transfer
Enhancements in Rotating Two-Pass Coolant Channels With
Profiled Ribs: Part 1—Average Results. 123, 97-106

_____ (see Nikitopoulos, D. E.) 123, 107-114

Acharya, Sumanta — (see Pamula, Gautam) 123, 281-287

Agachev, R. — (see Syred, N.) 123, 609-613

Ameri, A. A. — Heat Transfer and Flow on the Blade Tip of a Gas
Turbine Equipped With a Mean-Camberline Strip. 123, 704—708

Arnulfi, Gianmario L., Giannattasio, Pietro, Micheli, Diego, and
Pinamonti, Piero — An Innovative Device for Passive
Control of Surge in Industrial Compression Systems. 123, 473-482

Arts, T. — (see Dénos, R.) 123, 81-89

Bailey, Jeremy C. — (see Bunker, Ronald S.) 123, 774-780

Baldauf, S., Schulz, A., and Wittig, S. — High-Resolution
Measurements of Local Heat Transfer Coefficients From
Discrete Hole Film Cooling. 123, 749-757

___, Schulz, A., and Wittig, S. — High-Resolution Measurements of

Local Effectiveness From Discrete Hole Film Cooling.
123, 758-765

Bauer, Michael — (see Riegler, Claus) 123, 372-378

Baumgarten, Sven — (see Friedrichs, Jens) 123, 483-489

Beacher, B. F. — (see Ehrich, F. F.) 123, 446-452

_____ (see Storace, A. F.) 123, 433-445

Bein, Thomas W. — (see Lee, Yu-Tai) 123, 73-79

_____ (see Lee, Yu-Tai) 123, 80(D)

Belz, Joachim — (see Carstens, Volker) 123, 402-408

Bergles, Arthur E. — (see Willett, Fred T.) 123, 288-295

Bogard, David G. — (see Ethridge, Marcia I.) 123, 231-237

_____ (see Harrington, Mark K.) 123, 798-805

Bons, Jeffrey P., Sondergaard, Rolf, and Rivir, Richard B.
— Turbine Separation Control Using Pulsed Vortex Generator Jets.
123, 198-206

= , Taylor, Robert P., McClain, Stephen T., and Rivir, Richard
B. — The Many Faces of Turbine Surface Roughness.
123, 739-748

Boyle, R. J., Spuckler, C. M., Lucci, B. L., and Camperchioli, W. P.
— Infrared Low-Temperature Turbine Vane Rough Surface Heat
Transfer Measurements. 123, 168-177

Bright, M. M. — (see Spakovszky, Z. S.) 123, 464-472

Bright, Michelle B. — (see Suder, Kenneth L.) 123, 14-23

Bright, Michelle M. — (see Wernet, Mark P.) 123, 418-428

Bryg, David J. — (see Jaw, Link C.) 123, 9-13

Bunker, Ronald S., and Bailey, Jeremy C. — Film Cooling Discharge
Coefficient Measurements in a Turbulated Passage With Internal
Crossflow. 123, 774-780

_____ (see Van Fossen, G. James) 123, 140-146

Camci, Cengiz — (see McLean, Christopher) 123, 687-696
______ (see McLean, Christopher) 123, 697-703

(see Uzol, Oguz) 123, 238-248

_____ (see Uzol, Oguz) 123, 249-257

Camperchioli, W. P. — (see Boyle, R. J.) 123, 168-177

830 / Vol. 123, OCTOBER 2001

All authors of papers published in this volume are listed alphabetically. Full titles are included in each first

author's entry. Letters in parentheses follow some of the page numbers: TB indicates Technical Brief, D indicates
Discussion, and E indicates Errata.

idex

Carstens, Volker, and Belz, Joachim — Numerical Investigation of
Nonlinear Fluid-Structure Interaction in Vibrating Compressor
Blades. 123, 402-408

_____ (see Gruber, Bjorn) 123, 409-417

Chen, Hamn-Ching — (see Jang, Yong-Jun) 123, 124-132

Childs, D. W. — (see Nielsen, K. K.) 123, 353-358

Chima, R. V. — (see Lepicovsky, J.) 123, 501-509

Cho, Hyung Hee, Kang, Seung Goo, and Rhee, Dong Ho
— Heat/Mass Transfer Measurement Within a Film Cooling Hole of
Square and Rectangular Cross Section. 123, 806-814
__, and Rhee, Dong Ho — Local Heat/Mass Transfer
Measurement on the Effusion Plate in Impingement/Effusion Cooling
Systems. 123, 601-608

Cousins, William T. — (see Jaw, Link C.) 123, 9-13

Cumpsty, N. A. — Discussion: ““Comparative Studies on Short and
Long Length-Scale Stall Cell Propagating in an Axial
Compressor Rotor” (Inoue, M., Kuroumaru, M., Tanino, T., Yoshida,
S., and Furukawa, M., 2001, ASME J. Turbomach., 123, pp.
24-30). 123, 31(D)

____ Discussion: “Direct Method for Optimization of a Centrifugal
Compressor Vaneless Diffuser” (Lee, Y.-T., Luo, L., and Bein,
T. W., 2001, ASME J. Turbomach., 123, pp. 73-79). 123, 79-80(D)
Discussion: “Rotating Instabilities in an Axial Compressor

Originating From the Fluctuating Blade Tip Vortex’ (Mailach, R.,
Lehmann, I., and Vogeler, K., 2001, ASME J. Turbomach.,
123, No. 3, pp. 453-460). 123, 461(D)

Cutbirth, J. Michael — (see Ethridge, Marcia I.) 123, 231-237

Dailey, Geoffrey M. — (see Son, Changmin) 123, 154-160

Dawes, W. N., Dhanasekaran, P. C., Demargne, A. A. J., Kellar, W.
P., and Savill, A. M. — Reducing Bottlenecks in the CAD-to-
Mesh-to-Solution Cycle Time to Allow CFD to Participate in Design.
123, 552-557

Demargne, A. A. J. — (see Dawes, W. N.) 123, 552-557

_____ (see Wallis, A. M.) 123, 334-341

Dénos, R., Arts, T., Paniagua, G., Michelassi, V., and Martelli, F.
— Investigation of the Unsteady Rotor Aerodynamics in a
Transonic Turbine Stage. 123, 81-89

Denton, J. D. — (see Wallis, A. M.) 123, 334-341

Dhanasekaran, P. C. — (see Dawes, W. N.) 123, 552-557

Dunn, Michael G. — Convective Heat Transfer and Aerodynamics in
Axial Flow Turbines. 123, 637-686

Ehrich, F. F., Spakovszky, Z. S., Martinez-Sanchez, M., Song, S. J.,
Wisler, D. C., Storace, A. F., Shin, H.-W., and Beacher, B. F.
— Unsteady Flow and Whirl-Inducing Forces in Axial-
Flow Compressors: Part II—Analysis. 123, 446-452
_____ (see Storace, A. F.) 123, 433-445
Ekkad, Srinath V. — (see Pamula, Gautam) 123, 281-287
Eliades, V. — (see Acharya, S.) 123, 97-106
_____ (see Nikitopoulos, D. E.) 123, 107-114

Transactions of the ASME

q
Turbomachinery
d
4
=
q

Ethridge, Marcia I., Cutbirth, J. Michael, and Bogard, David G.
— Scaling of Performance for Varying Density Ratio Coolants
on an Airfoil With Strong Curvature and Pressure Gradient Effects.
123, 231-237

Feng, J. — (see Roy, R. P.) 123, 621-632

Fonov, Sergey D. — (see Navarra, Kelly R.) 123, 823-829

Fottner, Leonhard — (see Leinhos, Dirk C.) 123, 1-8

____ (see Schmid, Norbert R.) 123, 379-385

Friedrichs, Jens, Baumgarten, Sven, Kosyna, Gunter, and Stark,
Udo — Effect of Stator Design on Stator Boundary Layer
Flow in a Highly Loaded Single-Stage Axial-Flow Low-Speed
Compressor. 123, 483-489

Furukawa, M. — (see Inoue, M.) 123, 24-30

_____ (see Inoue, M.) 123, 31-32(D)

Gaddis, J. L. — (see Li, X.) 123, 161-167

Giannattasio, Pietro — (see Arnulfi, Gianmario L.) 123, 473-482

Gillespie, David — (see Son, Changmin) 123, 154-160

Glezer, B. — (see Mahmood, G. I.) 123, 115-123

Glezer, Boris — (see McLean, Christopher) 123, 687-696

_____ (see McLean, Christopher) 123, 697-703

_____ (see Uzol, Oguz) 123, 238-248

Goldstein, R. J., and Jin, P. — Film Cooling Downstream of a Row of
Discrete Holes With Compound Angle. 123, 222-230

Goss, Larry P. — (see Navarra, Kelly R.) 123, 823-829

Gritsch, Michael, Schulz, Achmed, and Wittig, Sigmar — Effect of
Crossflows on the Discharge Coefficient of Film Cooling Holes
With Varying Angles of Inclination and Orientation. 123, 781-787

Gruber, Bjorn, and Carstens, Volker — The Impact of Viscous Effects
on the Aerodynamic Damping of Vibrating Transonic Compressor
Blades—A Numerical Study. 123, 409-417

Gummer, V., Wenger, U., and Kau, H.-P. — Using Sweep and
Dihedral to Control Three-Dimensional Fiow in Transonic Stators of
Axial Compressors. 123, 40-48

Gyarmathy, G. — (see Pfau, A.) 123, 342-352

Hah, Chunill — (see Navarra, Kelly R.) 123, 823-829

Han, Je-Chin — (see Jang, Yong-Jun) 123, 124-132

Harrington, Mark K., McWaters, Marcus A., Bogard, David G.,
Lemmon, Christopher A., and Thole, Karen A.
— Full-Coverage Film Cooling With Short Normal Injection Holes.
123, 798-805

Harvey, N. W. — (see Howell, R. J.) 123, 181-188

Harvey, Neil W., and Ramsden, Ken — A Computational Study of a
Novel Turbine Rotor Partial Shroud. 123, 534-543

Hathaway, Michael D. — (see Suder, Kenneth L.) 123, 14-23

He, L. — (see Queune, O. J. R.) 123, 519-525

Heidmann, James D., Lucci, Barbara L., and Reshotko, Eli — An
Experimental Study of the Effect of Wake Passing on Turbine
Blade Film Cooling. 123, 214-221

Hill, M. L. — (see Mahmood, G. I.) 123, 115-123

Hodson, H. P. — (see Howell, R. J.) 123, 181-188

Horlock, J. H. — The Basic Thermodynamics of Turbine Cooling.
123, 583-592

Howell, R. J., Ramesh, O. N., Hodson, H. P., Harvey, N. W., and
Schulte, V. — High Lift and Aft-Loaded Profiles for Low-
Pressure Turbines. 123, 181-188

Hughes, J. D., and Walker, G. J. — Natural Transition Phenomena on
an Axial Compressor Blade. 123, 392-401

Hultgren, Lennart S. — (see Volino, Ralph J.) 123, 189-197

Hwang, Jenn-Jiang, and Lu, Chau-Ching — Lateral-Flow Effect on
Endwall Heat Transfer and Pressure Drop in a Pin-Fin Trapezoidal

Duct of Various Pin Shapes. 123, 133-139

Journal of Turbomachinery

Imregun, M. — (see Sbardella, L.) 123, 568-582
Inoue, M., Kuroumaru, M., Tanino, T., Yoshida, S., and Furukawa,
M. — Comparative Studies on Short and Long Length-Scale Stall
Cell Propagating in an Axial Compressor Rotor. 123, 24-30
____, Kuroumaru, M., Tanino, T., Yoshida, S., and Furukawa,
M. — Closure to “Discussion of ‘Comparative Studies on
Short and Long Length-Scale Stall Cell Propagating in an Axial

Compressor Rotor’ ”
123, 31—32(D)
Ireland, Peter — (see Son, Changmin) 123, 154-160
Ishida, Masahiro, Sakaguchi, Daisaku, and Ueki, Hironobu
— Suppression of Rotating Stall by Wall Roughness Control in
Vaneless Diffusers of Centrifugal Blowers. 123, 64-72

(2001, ASME J. Turbomach., 123, p. 31).

Jaiswal, Ruchira Sharma — (see Zhang, Luzeng J.) 123, 730-738

James, F. D. — (see Wadia, A. R.) 123, 544-551

Jang, Yong-Jun, Chen, Hamn-Ching, and Han, Je-Chin — Flow and
Heat Transfer in a Rotating Square Channel With 45 deg Angled
Ribs by Reynolds Stress Turbulence Model. 123, 124-132

Jaw, Link C., Cousins, William T., Wu, Dong N., and Bryg, David J.
— Design and Test of a Semi-Passive Flow Control Device for
Inlet Distortion Suppression. 123, 9-13

Jin, P. — (see Goldstein, R. J.) 123, 222-230

Joo, Seong Kuk — (see Lee, Sang Woo) 123, 274-280

Jouini, D. B. M., Sjolander, S. A., and Moustapha, S. H.
— Aerodynamic Performance of a Transonic Turbine Cascade at Off-
Design Conditions. 123, 510-518

Kang, Seung Goo — (see Cho, Hyung Hee) 123, 806-814

Karamanis, N., Martinez-Botas, R. F., and Su, C. C. — Mixed Flow
Turbines: Inlet and Exit Flow Under Steady and Pulsating
Conditions. 123, 359-371

Kau, H.-P. — (see Gummer, V.) 123, 40-48

Kellar, W. P. — (see Dawes, W. N.) 123, 552-557

Khalatov, A. — (see Syred, N.) 123, 609-613

Kim, S. — (see Willenborg, K.) 123, 815-822

Kost, Friedrich, and Nicklas, Martin — Film-Cooled Turbine Endwall
in a Transonic Flow Field: Part I—Aerodynamic Measurements.
123, 709-719
___ (see Tiedemann, Maik) 123, 526-533

Kosyna, Gunter — (see Friedrichs, Jens) 123, 483-489

Kozlov, A. — (see Syred, N.) 123, 609-613

Kuroumaru, M. — (see Inoue, M.) 123, 24-30

____ (see Inoue, M.) 123, 31-—32(D)

Kurzke, Joachim — (see Riegler, Claus) 123, 372-378

Lakshminarayana, B. — (see Tallman, J.) 123, 314-323

_____ (see Tallman, J.) 123, 324-333

Lakshminarayana, Budugur — (see McCarter, Andrew A.)
123, 305-313

(see Xiao, Xinwen) 123, 296-304

Larsonneur, R. — (see Spakovszky, Z. S.) 123, 464-472

Lee, Joon Sik — (see Lee, Sang Woo) 123, 266-273

___ (see Lee, Sang Woo) 123, 274-280

Lee, Sang Woo, Joo, Seong Kuk, and Lee, Joon Sik — Flow
Characteristics Inside Circular Injection Holes Normally Oriented to a
Crossflow: Part [I—Three-Dimensional Flow Data and
Aerodynamic Loss. 123, 274-280

_____, Park, Sang Won, and Lee, Joon Sik — Flow Characteristics
Inside Circular Injection Holes Normally Oriented to a
Crossflow: Part I — Flow Visualizations and Flow Data in the
Symmetry Plane. 123, 266-273

Lee, Yu-Tai, Luo, Lin, and Bein, Thomas W. — Direct Method for
Optimization of a Centrifugal Compressor Vaneless Diffuser.
123, 73-79

OCTOBER 2001, Vol. 123 / 831

8
a
|
!
3
q
}
{
i
i

____, Luo, Lin, and Bein, Thomas W. — Closure to “Discussion of
‘Direction Method for Optimization of a Centrifugal Compressor
Vaneless Diffuser’ * (2000, ASME, J. Turbomach., 123, p.

79). 123, 80(D)

Lehmann, I. — (see Mailach, R.) 123, 453-460

Lehmann, Ingolf — (see Vogeler, Konrad) 123, 461—463(D)

Leinhos, Dirk C., Schmid, Norbert R., and Fottner, Leonhard — The
Influence of Transient Inlet Distortions on the Instability Inception
of a Low-Pressure Compressor in a Turbofan Engine.

123, 1-8
____ (see Schmid, Norbert R.) 123, 379-385
Lemmon, Christopher A. — (see Harrington, Mark K.) 123, 798-805
Lepicovsky, J., Chima, R. V., McFarland, E. R., and Wood, J.
R. — On Flowfield Periodicity in the NASA Transonic
Flutter Cascade. 123, 501-509

Li, X., Gaddis, J. L., and Wang, T. — Mist/Steam Heat Transfer in
Confined Slot Jet Impingement. 123, 161—167

Ligrani, P. M., Saumweber, C., Schulz, A., and Wittig, S. — Shock
Wave-—Film Cooling Interactions in Transonic Flows.

123, 788-797
(see Mahmood, G. I.) 123, 115-123
Lock, G. D. — (see Rowbury, D. A.) 123, 258-265
(see Rowbury, D. A.) 123, 593-600

Lu, Chau-Ching — (see Hwang, Jenn-Jiang) 123, 133-139

Lucci, B. L. — (see Boyle, R. J.) 123, 168-177

Lucci, Barbara L. — (see Heidmann, James D.) 123, 214-221

Luo, Lin — (see Lee, Yu-Tai) 123, 73-79
___ (see Lee, Yu-Tai) 123, 80(D)

Mahmood, G. I., Hill, M. L., Nelson, D. L., Ligrani, P. M., Moon, H.-
K., and Glezer, B. — Local Heat Transfer and Flow Structure on
and Above a Dimpled Surface in a Channel. 123, 115-123

Mailach, R., Lehmann, I., and Vogeler, K. — Rotating Instabilities in
an Axial Compressor Originating From the Fluctuating Blade Tip
Vortex. 123, 453-460

Mailach, Ronald — (see Vogeler, Konrad) 123, 461—463(D)

Martelli, F. — (see Dénos, R.) 123, 81-89

Martinez-Botas, R. F. — (see Karamanis, N.) 123, 359-371

Martinez-Sanchez, M. — (see Ehrich, F. F.) 123, 446-452

(see Storace, A. F.) 123, 435-445

Mathioudakis, K. — (see Tsalavoutas, A.) 123, 33-39

McCarter, Andrew A., Xiao, Xinwen, and Lakshminarayana,
Budugur — Tip Clearance Effects in a Turbine Rotor: Part II—
Velocity Field and Flow Physics. 123, 305-313

(see Xiao, Xinwen) 123, 296-304

McClain, Stephen T. — (see Bons, Jeffrey P.) 123, 739-748

McFarland, E. R. — (see Lepicovsky, J.) 123, 501-509

McLean, Christopher, Camci, Cengiz, and Glezer, Boris
— Mainstream Aerodynamic Effects Due to Wheelspace Coolant
Injection in a High-Pressure Turbine Stage: Part I—
Aerodynamic Measurements in the Stationary Frame. 123, 687-696

, Camci, Cengiz, and Glezer, Boris — Mainstream Aerodynamic
Effects Due to Wheelspace Coolant Injection in a High-Pressure
Turbine Stage: Part II—Aerodynamic Measurements in the Rotational
Frame. 123, 697-703

McWaters, Marcus A. — (see Harrington, Mark K.) 123, 798-805

Michelassi, V. — (see Dénos, R.) 123, 81-89

Micheli, Diego — (see Arnulfi, Gianmario L.) 123, 473-482

Mildner, Frank — (see Monig, Reinhard) 123, 558-567

Monig, Reinhard, Mildner, Frank, and Roper, Ralf — Viscous-Flow
Two-Dimensional Analysis Including Secondary Flow Effects.

123, 558-567

Moon, H.-K. — (see Mahmood, G. I.) 123, 115-123
Moustapha, S. H. — (see Jouini, D. B. M.) 123, 510-518
Muller, R. — (see Sauer, H.) 123, 207-213

Myllerup, C. M. — (see Nielsen, K. K.) 123, 353-358

832 / Vol. 123, OCTOBER 2001

Navarra, Kelly R., Rabe, Douglas C., Fonov, Sergey D., Goss, Larry
P., and Hah, Chunill — The Application of Pressure- and
Temperature-Sensitive Paints to an Advanced Compressor.

123, 823-829

Nelson, D. L. — (see Mahmood, G. I.) 123, 115-123

Nicklas, Martin — Film-Cooled Turbine Endwall in a Transonic Flow
Field: Part II—Heat Transfer and Film-Cooling Effectiveness.

123, 720-729
(see Kost, Friedrich) 123, 709-719

Nielsen, K. K., Childs, D. W., and Myllerup, C. M. — Experimental
and Theoretical Comparison of Two Swirl Brake Designs.
123, 353-358

Nikitopoulos, D. E., Eliades, V., and Acharya, S. — Heat Transfer
Enhancements in Rotating Two-Pass Coolant Channels With
Profiled Ribs: Part 2—Detailed Measurements. 123, 107-114

(see Acharya, S.) 123, 97-106

Oldfield, M. L. G. — (see Rowbury, D. A.) 123, 258-265
(see Rowbury, D. A.) 123, 593-600
Ottavy, Xavier, Trébinjac, Isabelle, and Vouillarmet, André
— Analysis of the Interrow Flow Field Within a Transonic Axial
Compressor: Part |—Experimental Investigation. 123, 49-56
, Trébinjac, Isabelle, and Vouillarmet, André — Analysis of the
Interrow Flow Field Within a Transonic Axial Compressor: Part 2—
Unsteady Flow Analysis. 123, 57-63

Paduano, J. D. — (see Spakovszky, Z. S.) 123, 464-472

Pamula, Gautam, Ekkad, Srinath V., and Acharya, Sumanta
— Influence of Crossflow-Induced Swirl and Impingement on Heat
Transfer in a Two-Pass Channel Connected by Two Rows of
Holes. 123, 281-287

Pan, Y. — (see Taslim, M. E.) 123, 766-773

Paniagua, G. — (see Dénos, R.) 123, 81-89

Park, Sang Won — (see Lee, Sang Woo) 123, 266-273

Paynter, Gerald C. — (see Slater, John W.) 123, 386-391

Pfau, A., Treiber, M., Sell, M., and Gyarmathy, G. — Flow Interaction
From the Exit Cavity of an Axial Turbine Blade Row Labyrinth
Seal. 123, 342-352

Pinamonti, Piero — (see Arnulfi, Gianmario L.) 123, 473-482

Poinsatte, Philip — (see Thurman, Douglas) 123, 90-96

Queune, O. J. R., and He, L. — Experimental Study of 3D Unsteady
Flow Around Oscillating Blade With Part-Span Separation.
123, 519-525

Rabe, Douglas C. — (see Navarra, Kelly R.) 123, 823-829
Ramesh, O. N. — (see Howell, R. J.) 123, 181-188
Ramsden, Ken — (see Harvey, Neil W.) 123, 534-543
Reshotko, Eli — (see Heidmann, James D.) 123, 214-221
Rhee, Dong Ho — (see Cho, Hyung Hee) 123, 601-608
(see Cho, Hyung Hee) 123, 806-814
Riegler, Claus, Bauer, Michael, and Kurzke, Joachim — Some
Aspects of Modeling Compressor Behavior in Gas Turbine
Performance Calculations. 123, 372-378
Rivir, Richard B. — (see Bons, Jeffrey P.) 123, 198-206
(see Bons, Jeffrey P.) 123, 739-748
Roper, Ralf — (see MOnig, Reinhard) 123, 558-567
Rowbury, D. A., Oldfield, M. L. G., and Lock, G. D. — A Method
for Correlating the Influence of External Crossflow on the
Discharge Coefficients of Film Cooling Holes. 123, 258-265
, Oldfield, M. L. G., and Lock, G. D. — Large-Scale Testing to
Validate the Influence of External Crossflow on the Discharge
Coefficients of Film Cooling Holes. 123, 593-600

Transactions of the ASME

f

i

}

1

Roy, R. P., Xu, G., and Feng, J. — A Study of Convective Heat
Transfer in a Model Rotor—Stator Disk Cavity. 123, 621-632

Saidi, Arash, and Sundén, Bengt — On Prediction of Thermal-
Hydraulic Characteristics of Square-Sectioned Ribbed
Cooling Ducts. 123, 614-620

Sakaguchi, Daisaku — (see Ishida, Masahiro) 123, 64-72

Sauer, H., Muller, R., and Vogeler, K. — Reduction of Secondary
Flow Losses in Turbine Cascades by Leading Edge
Modifications at the Endwall. 123, 207-213

Saumweber, C. — (see Ligrani, P. M.) 123, 788-797

Savill, A. M. — (see Dawes, W. N.) 123, 552-557

Sbardella, L., and Imregun, M. — Linearized Unsteady Viscous
Turbomachinery Flows Using Hybrid Grids. 123, 568-582

Schmid, Norbert R., Leinhos, Dirk C., and Fottner, Leonhard
— Steady Performance Measurements of a Turbofan Engine
With Inlet Distortions Containing Co- and Counterrotating Swirl From
an Intake Diffuser for Hypersonic Flight. 123, 379-385

_____ (see Leinhos, Dirk C.) 123, 1-8

Schulte, V. — (see Howell, R. J.) 123, 181-188

Schulz, A. — (see Baldauf, S.) 123, 749-757

_____ (see Baldauf, S.) 123, 758-765

_____ (see Ligrani, P. M.) 123, 788-797

Schulz, Achmed — (see Gritsch, Michael) 123, 781—787

Sell, M. — (see Pfau, A.) 123, 342-352

Setayeshgar, L. — (see Taslim, M. E.) 123, 147-153

Shan, Peng — Kinematic Analysis of 3-D Swept Shock Surfaces in
Axial Flow Compressors. 123, 490-500

Shchukin, A. — (see Syred, N.) 123, 609-613

Shin, H.-W. — (see Ehrich, F. F.) 123, 446-452
_ (see Storace, A. F.) 123, 433-445

Sjolander, S. A. — (see Jouini, D. B. M.) 123, 510-518

Skoch, Gary J. — (see Wernet, Mark P.) 123, 418-428

Slater, John W., and Paynter, Gerald C. — Implementation of a
Compressor Face Boundary Condition Based on Small
Disturbances. 123, 386-391

Smith, M. — (see Tsalavoutas, A.) 123, 33-39

Son, Changmin, Gillespie, David, Ireland, Peter, and Dailey,
Geoffrey M. — Heat Transfer and Flow Characteristics of an Engine
Representative Impingement Cooling System. 123, 154-160

Sondergaard, Rolf — (see Bons, Jeffrey P.) 123, 198-206

Song, S. J. — (see Ehrich, F. F.) 123, 446-452

____ (see Storace, A. F.) 123, 433-445

Spakovszky, Z. S., Paduano, J. D., Larsonneur, R., Traxler, A., and
Bright, M. M. — Tip Clearance Actuation With Magnetic
Bearings for High-Speed Compressor Stall Control. 123, 464-472

_____ (see Ehrich, F. F.) 123, 446-452

_____ (see Storace, A. F.) 123, 433-445

Spring, S. D. — (see Taslim, M. E.) 123, 147-153

_____ (see Taslim, M. E.) 123, 766-773

Spuckler, C. M. — (see Boyle, R. J.) 123, 168-177

Stamatis, A. — (see Tsalavoutas, A.) 123, 33-39

Stark, Udo — (see Friedrichs, Jens) 123, 483-489

Storace, A. F., Wisler, D. C., Shin, H.-W., Beacher, B. F., Ehrich, F.
F., Spakovszky, Z. S., Martinez-Sanchez, M., and Song, S. J.
— Unsteady Flow and Whirl-Inducing Forces in Axial-
Flow Compressors: Part I—Experiment. 123, 433-445

_____ (see Ehrich, F. F.) 123, 446-452

Strazisar, Anthony J. — (see Suder, Kenneth L.) 123, 14-23

Su, C. C. — (see Karamanis, N.) 123, 359-371

Suder, Kenneth L., Hathaway, Michael D., Thorp, Scott A.,
Strazisar, Anthony J., and Bright, Michelle B. — Compressor
Stability Enhancement Using Discrete Tip Injection.
123, 14-23

Sundeén, Bengt — (see Saidi, Arash) 123, 614-620

Syred, N., Khalatov, A., Kozlov, A., Shchukin, A., and Agachev, R.
— Effect of Surface Curvature on Heat Transfer and

Hydrodynamics Within a Single Hemispherical Dimple. 123, 609-613

Journal of Turbomachinery

Tallman, J., and Lakshminarayana, B. — Numerical Simulation of
Tip Leakage Flows in Axial Flow Turbines, With Emphasis on
Flow Physics: Part I—Effect of Tip Clearance Height. 123, 314-323

_, and Lakshminarayana, B. — Numerical Simulation
of Tip Leakage Flows in Axial Flow Turbines, With Emphasis on
Flow Physics: Part II—Effect of Outer Casing Relative
Motion. 123, 324-333
Tanino, T. — (see Inoue, M.) 123, 24-30
__ (see Inoue, M.) 123, 31-32(D)

Taslim, M. E., Pan, Y., and Spring, S. D. — An Experimental Study
of Impingement on Roughened Airfoil Leading-Edge Walls With
Film Holes. 123, 766-773

, Setayeshgar, L., and Spring, S. D. — An Experimental
Evaluation of Advanced Leading Edge Impingement Cooling
Concepts. 123, 147-153

Taylor, Robert P. — (see Bons, Jeffrey P.) 123, 739-748

Thole, Karen A. — (see Harrington, Mark K.) 123, 798-805

Thorp, Scott A. — (see Suder, Kenneth L.) 123, 14-23

Thurman, Douglas, and Poinsatte, Philip — Experimental Heat
Transfer and Bulk Air Temperature Measurements for a
Multipass Internal Cooling Model With Ribs and Bleed. 123, 90-96

Tiedemann, Maik, and Kost, Friedrich — Some Aspects of
Wake-Wake Interactions Regarding Turbine Stator
Clocking. 123, 526-533

Traxler, A. — (see Spakovszky, Z. S.) 123, 464-472

Trébinjac, Isabelle — (see Ottavy, Xavier) 123, 49-56

(see Ottavy, Xavier) 123, 57-63

Treiber, M. — (see Pfau, A.) 123, 342-352

Tsalavoutas, A., Mathioudakis, K., Stamatis, A., and Smith, M.
— Identifying Faults in the Variable Geometry System of a
Gas Turbine Compressor. 123, 33-39

Ueki, Hironobu — (see Ishida, Masahiro) 123, 64-72

Uzol, Oguz, and Camci, Cengiz — Aerodynamic Loss Characteristics
of a Turbine Blade With Trailing Edge Coolant Ejection: Part 2—
External Aerodynamics, Total Pressure Losses, and
Predictions. 123, 249-257

___, Camci, Cengiz, and Glezer, Boris — Aerodynamic Loss

Characteristics of a Turbine Blade With Trailing Edge
Coolant Ejection: Part |—Effect of Cut-Back Length, Spanwise Rib
Spacing, Free-Stream Reynolds Number, and Chordwise Rib
Length on Discharge Coefficients. 123, 238-248

Van Fossen, G. James, and Bunker, Ronald S. — Augmentation of
Stagnation Region Heat Transfer Due to Turbulence From a
DLN Can Combustor. 123, 140-146
Vogeler, K. — (see Mailach, R.) 123, 453-460
(see Sauer, H.) 123, 207-213
Vogeler, Konrad, Mailach, Ronald, and Lehmann, Ingolf — Closure
to “Discussion of ‘Rotating Instabilities in an Axial Compressor
Originating from the Fluctuating Blade Tip Vortex’ (2000-GT-506)”
(2001, ASME J. Turbomach., 123, p. 461). 123, 461—463(D)
Volino, Ralph J., and Hultgren, Lennart S. — Measurements in
Separated and Transitional Boundary Layers Under Low-
Pressure Turbine Airfoil Conditions. 123, 189-197
Vouillarmet, André — (see Ottavy, Xavier) 123, 49-56
(see Ottavy, Xavier) 123, 57-63

Wadia, A. R., and James, F. D. — F110-GE-132: Enhanced Power
Through Low-Risk Derivative Technology. 123, 544-551

Walker, G. J. — (see Hughes, J. D.) 123, 392-401

Wallis, A. M., Denton, J. D., and Demargne, A. A. J. — The Control
of Shroud Leakage Flows to Reduce Aerodynamic Losses in a
Low Aspect Ratio, Shrouded Axial Flow Turbine. 123, 334-341

Wang, T. — (see Li, X.) 123, 161—167

OCTOBER 2001, Vol. 123 / 833

‘St
ae
3
{
|
q

Wenger, U. — (see Gummer, V.) 123, 40—48

Wernet, Mark P., Bright, Michelle M., and Skoch, Gary J. — An
Investigation of Surge in a High-Speed Centrifugal Compressor
Using Digital PIV. 123, 418-428

Willenborg, K., Kim, S., and Wittig, S. — Effects of Reynolds
Number and Pressure Ratio on Leakage Loss and Heat
Transfer in a Stepped Labyrinth Seal. 123, 815-822

Willett, Fred T., and Bergles, Arthur E. — Heat Transfer in Rotating
Narrow Rectangular Ducts With Heated Sides Oriented at 60° to
the r-z Plane. 123, 288-295

Wisler, D. C. — (see Ehrich, F. F.) 123, 446-452

_____ (see Storace, A. F.) 123, 433-445

Wittig, S. — (see Baldauf, S.) 123, 749-757

(see Baldauf, S.) 123, 758-765

_____ (see Ligrani, P. M.) 123, 788-797

(see Willenborg, K.) 123, 815-822

Wittig, Sigmar — (see Gritsch, Michael) 123, 781-787

834 / Vol. 123, OCTOBER 2001

Wood, J. R. — (see Lepicovsky, J.) 123, 501-509
Wu, Dong N. — (see Jaw, Link C.) 123, 9-13

Xiao, Xinwen, McCarter, Andrew A., and Lakshminarayana,
Budugur — Tip Clearance Effects in a Turbine Rotor: Part I—
Pressure Field and Loss. 123, 296-304

_____ (see McCarter, Andrew A.) 123, 305-313

Xu, G. — (see Roy, R. P.) 123, 621-632

Yoshida, S. — (see Inoue, M.) 123, 24-30
(see Inoue, M.) 123, 31—32(D)

Zhang, Luzeng J., and Jaiswal, Ruchira Sharma — Turbine Nozzle
Endwall Film Cooling Study Using Pressure-Sensitive Paint.
123, 730-738

Transactions of the ASME

) ‘
(
4
|
|